부드러운 대패

x-travel: 2.000 mmy-travel: 1.200 mmz-travel: 760 mmControl: SIEMENS 810D table-size: 2.200 x 1.100 mmtable weight: 3.500 Kgdistance between columns: 1.300 mmtool adaptor: BT 50 rapid traverse X-axis: 15.000 m/minrapid traverse: x,y 12.000 m/minnumber of spindle speeds: 5.000 U/min/rpmengine output: 37 kWTools changer: tool magazin:: 30 Internal cooling system: 20 barcoolant tank: 1000 lhandwheel: Chip coveyor: total power requirement: 40 kWweight of the machine ca.: 16.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8.000 mmy-travel: 3.800 mmz-travel: 2.100 mmControl: HEIDENHAIN iTNC-530 table-size: 8.500 x 2.500 mmdistance between columns: 3.100 mmrapid travel x/y/z: 15/12.000 mm/minfeed: 5.000 m/minmilling head: Automatisch Drehung 4/5 number of spindle speeds: 4.000 U/min/rpmspindle drive: 37 kWtransmission ratio: 2 Stufentable weight: 35.000 Kgdistance spindle /table: 500-1.750 mmrapid travel x/y/z: 10.000/12.000 mm/minfeeds:: 7.000 mm/mindimensions of the machine ca.: 19.370 x 5.850 x 5.970 mmtool change unit: 30 pos.weight of the machine ca.: 93 t- 5 AXIS BRIDGE TYPE MILLING MACHINESMax height table to underside bridge 2.100 mmMin/max distance table to spindle 500-1.750 mmRapid Feed (X Axis) 10.000 mm/minRapid Feed (Y,Z Axis) 12.000 mm/minMax. Working Feed 7.000 mm/minAutomatic head C5 E INCLUDEDB-Axis head swivel ± 190ºC Axis head rotation ± 360ºSpindle ...

x-travel: 5000 mmy-travel: 3100 mmz-travel: 1200 mmControl: FIDIA C20 table-size: 5000x2000 mmT-slots: 11 T-slot - width: 22 mmtable weight: 30000 Kgdistance between columns: 2800 mmfeed:: x-20000 mm/minfeed: y,z-30000 mm/minspindle rate: 6000 rpm: 32 kWtaper ISO: ISO 50 Tools changer: 30 fach/toolsinternal coolant system feed: 20 barhandwheel: weight of the machine ca.: 65 tdimensions of the machine ca.: 15.100x6.200x6.250 mm-Automatic head UAD II-Tool clamping Hydraulic-Head 2 – Vertical mandril INCLUDED-2 longitudinal chip conveyors-1 cross chip conveyor-Laser tool presetterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-트래블: 4.500mm Y-트래블: 1.800mm Z-트래블: 1.200mm 제어: HEIDENHAIN ITNC - 530 핸드휠: HEIDENHAIN 520 밀링 헤드 회전 가능 +/-: 2,5 X 2,5 내부 냉각 시스템: 20bar절삭유: 1.000L공구 교환 장치: 40핀칩 코베이어: 2 St. 공구 어댑터: ISO 50 제어: 총 전력 요구 사항: kW기계의 무게 ca.: t기계의 치수 ca.: m

max. workpiece diameter: 500 mmthreading length: 1250 mmmax. module: 12 min. module: 0,5 total power requirement: 8 kWweight of the machine ca.: 4,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x 트래블: 3,400mm y 트래블: 1,250mm z 트래블: 2,000mm 제어: TNC-430PA 테이블 크기: 4,700 X 1,200mmV 트래블: 500 공구 홀더: ISO 50 밀링 헤드 - 스위블: 0.001º/0.001º도 메인모터: 37kW칩 컨베이어: 핸드휠 포함: HR-410 공구 교환기: 60포. 밀링 헤드 : 자동 헤드 45º 기계 무게 약 : 35 t- 자동 헤드 45º- 자동 헤드 45º 0.001º / 0.001º- 45º 헤드 45º 최대 속도 3,000 rpm- 45º 헤드 공구 홀더 ISO-50- 트위스트 헤드 무단 - 직경 프론트 베어링 150 mm. - 스테이션 픽업 AITEK 45º 및 트위스트 헤드 - RENISHAW MP 16 + SP2 / 1 - 턴테이블 ZEATZ 1200 옵션 추가 비용. 이 광고의 데이터는 LogoTech oHG의 기계 관리 인 ModulMWS로 작성되었습니다.

x-travel: 5.000 mmy-travel: 3.750 mmz-travel: 1.250 mmControl: iTNC-530 HSCI table-size: 5.200 x 2.200 mmdistance between columns: 3.000 mmfeeds: 50.000 mmfeeds: 30.000 mm/minmilling head: 0.001º/0.001º tool taper: DIN 69871 AD 50 number of spindle speeds: 6.000 U/min/rpmtransmission ratio: 3 spindle drive: 43 kWtool change unit: 20 - fach ( Vertikal) Internal cooling system: 20 barChip coveyor: 2 handwheel: HEIDENHAIN HR-520 total power requirement: 122,89 kVAweight of the machine ca.: 33 tMeasuring system: M&H PS 20.41 Headstocks:Universal Auto Indexing Head 45º 0.001º/0.001ºTaper DIN 69871 AD 50Spud ISO 7388-2 B 50Spindle speed 6.000 rpmSpeed ranges 3Main spindle power 43 kWDirect output head reduction 1:2,29 INCLUDEDTaper DIN 69871 AD 50Spud ISO 7388-2 B 50Spindle speed 2.000 rpmAutomatic support for automatic head change (direct exit head) in the u ...