맞춤 핀 홀 드릴링 머신

길이: 1980mm폭: 670mm바닥 높이: 850mm

Description: ESSEPIGI MODULA 300 Drilling and Dowel Inserting MachineApprox. Onsite Dimension. (l x w x h): 1,260 x 1,400 x 2,000 mm, weight approx.: 1,200 kg

Description: KOCH CENTRONIC Sawing, Drilling and Dowel Inserting MachineApprox. Onsite Dimension. (l x w x h): 5,520 x 2,030 x 2,170 mm, weight approx.: 4,500 kg

Description: Gluing System EVA Hotmelt Corner Rounding Unit , Max Panel Width 210 mm Min. panel height 10 mm Max. panel height 30 mm Min. panel length 115 mm Max. panel length 2500 mm Min. panel width 30 mm Max. panel width 210 mm Edge coil magazine , NO. EDGE PROCESSING UNITS 1 Processing Unit : fine trimming to trim and roundApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Min. panel length 115 mm Max. panel length 2500 mm Min. panel width 30 mm Max. panel width 210 mmApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Min. panel length 110 mm Max. panel length 800 mm Max. panel width 1250 mm No. Top clamps 6 no. bottom vertical units 1 with positioning by NC spindles for vertical boring 1 No. injectors 2 No. storage tank 1 Item inserted wooden dowels Control system KOCH NUMERIC Safety standard CE mark Safety photocellsApprox. Onsite Dimension. (l x w x h): 3,000 x 1,750 x 2,200 mm, weight approx.: 3,000 kg

Description: Min. panel length 150 mm Max. panel length 800 mm Min. panel width 230 mm Max. panel width 3200 mm Max. forward feed speed 70 m/min No. Top clamps 4 no. bottom vertical units 6 , motor power 1.3 KW r.p.m. 7000 RPM No. injectors 6+6 No. storage tank 2 Item inserted , wooden dowels , wooden dowels 8/10 mm TOOLS NOT INCLUDEDApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: POLYMAC F/S.E Drilling and Dowel Inserting Machine dowel injection unit - 5 x 8 mm dowels drilling units horizontal - 21 drilling units vertical - no material clamping - 4 dowel injection unit: 5 x 8 mm dowels, material clamping: 4, Approx. Onsite Dimension. (l x w x h): 1,770 x 1,160 x 2,280 mm, weight approx.: 700 kg

ORF 유니버설 5 스핀들

맞춤 핀 드릴링 머신 Schleicher 범용 드릴링 머신 BORFIX 유형 스위블 드릴 바 포함 9개의 드릴이 있는 드릴 기어 1.5kW 공압 공작물 홀더 2개 위와 뒤에서 드릴 쿠션 크기 1000mm×530mm 정지 레일 길이 2000 mm 팔레트 포함 무게 185kg 배송 치수 1200 mm x 1020 mm x H 1700 mm

SCM 드릴링 머신 모델 MB29 : – 나사산 연결부가 있는 29 스핀들 헤드 – 드릴링 0-90° 상부 수직/수평 – 3마력 엔진, 380볼트 – 6위치 드릴링 깊이 리볼버 – 4개의 공압 clamp조각을 고정하는 s – 알루미늄 레일로 완성 수출을 위한 세륨 기준에 따르지 않는 기계,

SCM 드릴링 머신 모델 TOP29: - 퀵 커플링이 있는 29스핀들 헤드 - 상부 수직에서 수평까지 0-90° 조정 가능한 드릴링 - 드릴링 헤드의 전동식 이동 - 6위치 드릴링 깊이 리볼버 - 조각을 고정하는 4개의 공압 클램프 - 알루미늄 레일로 완성 2024년 4월부터 이용 가능

Description: For drilling of glazing bars and frames, door components and sash joints 10 different drilling programmes Drilling head with 2 spindles Drilling stroke: max 80 mm Pneumatic workpiece hold-down device Right and left length stop  ,drilling units horizontal: 1 pieces, packing measure approx (l x w x h): 1,300 x 1,400 x 1,650 mm, Approx. Onsite Dimension. (l x w x h): 6,000 x 1,400 x 1,600 mm, weight approx.: 400 kg

Description: Max. panel width 1300 mm No of Bottom Units 1 No of injectors 1 bottom vertical units horizontal units Max. panel width 1300 mm No. Top clamps 4 spindles for horizontal boring 2  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , motor power 0.55 KW r.p.m. 2700 RPM Item inserted yes wooden dowels wooden dowels 10X50 Safety standard CE mark  ,  ,  ,  ,  ,  ,  , ,Approx. Onsite Dimension. (l x w x h): 3,250 x 1,900 x 1,800 mm, weight approx.: 1,500 kg

Description: serial number 801325 center distance between each spindle 32 mm minimum and maximum distance between the vertical heads 96-2000 mm minimum lenght of the piece 240 mm max. working width 2500 mm min.working width between the vertical units 96 mm boring capacity maximum 27 cycles/min the drilling depth is adjustable 0-70 mm conveying speed 57 m/min spindle rotations per minute 2800 g/min engine capacity 2,5 (horizontal) 1,5 plus 1,5 (vertical) HP pressure 5-8 atm air consumption with 6 boring units 50 liter / cyle air consumption per head 7 liter / cyle feeding nominal tension 400 V, 50 Hz nominal current 30,8 A maximum overload current 0,104 kA Approx. Onsite Dimension. (l x w x h): 3,710 x 1,800 x 1,500 mm, weight approx.: 1,540 kg, Serial Number of Manufacturer: 801,325