ダウエル穴掘削機

長さ: 1980 mm幅: 670 mm床上の高さ: 850 mm

Description: ESSEPIGI MODULA 300 Drilling and Dowel Inserting MachineApprox. Onsite Dimension. (l x w x h): 1,260 x 1,400 x 2,000 mm, weight approx.: 1,200 kg

Description: KOCH CENTRONIC Sawing, Drilling and Dowel Inserting MachineApprox. Onsite Dimension. (l x w x h): 5,520 x 2,030 x 2,170 mm, weight approx.: 4,500 kg

Description: Gluing System EVA Hotmelt Corner Rounding Unit , Max Panel Width 210 mm Min. panel height 10 mm Max. panel height 30 mm Min. panel length 115 mm Max. panel length 2500 mm Min. panel width 30 mm Max. panel width 210 mm Edge coil magazine , NO. EDGE PROCESSING UNITS 1 Processing Unit : fine trimming to trim and roundApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Min. panel length 115 mm Max. panel length 2500 mm Min. panel width 30 mm Max. panel width 210 mmApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Min. panel length 110 mm Max. panel length 800 mm Max. panel width 1250 mm No. Top clamps 6 no. bottom vertical units 1 with positioning by NC spindles for vertical boring 1 No. injectors 2 No. storage tank 1 Item inserted wooden dowels Control system KOCH NUMERIC Safety standard CE mark Safety photocellsApprox. Onsite Dimension. (l x w x h): 3,000 x 1,750 x 2,200 mm, weight approx.: 3,000 kg

Description: Min. panel length 150 mm Max. panel length 800 mm Min. panel width 230 mm Max. panel width 3200 mm Max. forward feed speed 70 m/min No. Top clamps 4 no. bottom vertical units 6 , motor power 1.3 KW r.p.m. 7000 RPM No. injectors 6+6 No. storage tank 2 Item inserted , wooden dowels , wooden dowels 8/10 mm TOOLS NOT INCLUDEDApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: POLYMAC F/S.E Drilling and Dowel Inserting Machine dowel injection unit - 5 x 8 mm dowels drilling units horizontal - 21 drilling units vertical - no material clamping - 4 dowel injection unit: 5 x 8 mm dowels, material clamping: 4, Approx. Onsite Dimension. (l x w x h): 1,770 x 1,160 x 2,280 mm, weight approx.: 700 kg

ORF ユニバーサル 5 スピンド�

ダボドリルマシン Schleicher 万能ボール盤 BORFIXタイプ スイベルドリルバー付き 9つのドリル付きドリルギア1.5 kW 2つの空気のワークの部品のホールダー 上からと後ろからドリル クッションサイズ 1000 mm x 530 mm ストップレールの長さ 2000 mm パレットを含む重量:185 kg 出荷寸法 1200 mm x 1020 mm x 高さ 1700 mm

SCMボール盤モデルMB29: – ねじ接続の29スピンドルヘッド –0-90°上部垂直/水平の穴あけ – 3馬力エンジン、380ボルト –6ポジションドリルデプスリボルバー –ピースを保持するための4つの空気圧クランプ –アルミニウム柵と完全 CE規格に準拠していない機械、輸出�

SCMボール盤モデルTOP29: - クイックカップリング付き29スピンドルヘッド - 上部垂直から水平まで0-90°調整可能な穴あけ - ドリルヘッドの電動移動 - 6ポジションドリルデプスリボルバー - ピースを保持するための4つの空気圧クランプ - アルミレール付き 2024年4月より提供開�

Description: For drilling of glazing bars and frames, door components and sash joints 10 different drilling programmes Drilling head with 2 spindles Drilling stroke: max 80 mm Pneumatic workpiece hold-down device Right and left length stop  ,drilling units horizontal: 1 pieces, packing measure approx (l x w x h): 1,300 x 1,400 x 1,650 mm, Approx. Onsite Dimension. (l x w x h): 6,000 x 1,400 x 1,600 mm, weight approx.: 400 kg

Description: Max. panel width 1300 mm No of Bottom Units 1 No of injectors 1 bottom vertical units horizontal units Max. panel width 1300 mm No. Top clamps 4 spindles for horizontal boring 2  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , motor power 0.55 KW r.p.m. 2700 RPM Item inserted yes wooden dowels wooden dowels 10X50 Safety standard CE mark  ,  ,  ,  ,  ,  ,  , ,Approx. Onsite Dimension. (l x w x h): 3,250 x 1,900 x 1,800 mm, weight approx.: 1,500 kg

Description: serial number 801325 center distance between each spindle 32 mm minimum and maximum distance between the vertical heads 96-2000 mm minimum lenght of the piece 240 mm max. working width 2500 mm min.working width between the vertical units 96 mm boring capacity maximum 27 cycles/min the drilling depth is adjustable 0-70 mm conveying speed 57 m/min spindle rotations per minute 2800 g/min engine capacity 2,5 (horizontal) 1,5 plus 1,5 (vertical) HP pressure 5-8 atm air consumption with 6 boring units 50 liter / cyle air consumption per head 7 liter / cyle feeding nominal tension 400 V, 50 Hz nominal current 30,8 A maximum overload current 0,104 kA Approx. Onsite Dimension. (l x w x h): 3,710 x 1,800 x 1,500 mm, weight approx.: 1,540 kg, Serial Number of Manufacturer: 801,325