판금 디버링 기계

판금 디버링 기계 제조사: ERNST 유형 : EM5 / N900 건축 년도: 1999 제어 유형: 전통적인 경폭: 880 mm 제품 고도: 1-70 mm 그라인딩 드럼 직경: 420 mm 기계 중량 : 약 2,800 kg 치수 약: 2,500 x 1,715 x1,675 mm 습식 연삭 공정에서 작동하는 자동 판금 디버링 기계 자동 마그네틱 필터 시스템 습식 샌딩 장치 세탁 및 건조 시설 자기 부상 폭: 200 mm 소형 부품의 최소 길이: 80 mm

공작물 직경: X mm 제어: X 테이블 치수: X mm기계 무게 Ca.: X T기계 치수 Ca.: X M

Approx. Onsite Dimension. (l x w x h): 1,173 x 1,123 x 1,136 mm, weight approx.: 330 kg

Description: Drum capacity: 400L Average filling weight: 600 kg Width of inner drum: 920 mm Max working dimension: 850x200 mm Max piece weight: 30 kg Motor: 400v, 50 hz, 3kW Rotation drum: 4-18 rpm Applications: Deburring, Degreasing, De-oiling, Decalcifying, Rust removal, Polishing Approx. Onsite Dimension. (l x w x h): 3,000 x 1,500 x 2,000 mm, weight approx.: 1,800 kg

working width: 1000 mmworkpiece width - max.: 0,5 - 50 mmsandingbelt width: -- mmweight of the machine ca.: 2,5 tWith the SBM-L 1000 G1S2, which works in the dry process, in alternating operationSteel, stainless steel and aluminum can be machined. She deburrs and roundsthe edges on the outer and inner contours of punched, laser, fine plasma orwater jet cut workpieces with a thickness of up to 50 mmon both sides in just one operation. Two sanding units, 1 each on the top and bottom, remove spatterand slight burrs on outside and inside edges of sheet metal. A total of four sanding belts, 2 each on the top and bottomUnderside, process the sheets on both sides at the same time. hereAll edges are softened or rounded, depending on the tool settings. Machining on both sides saves time-consuming turning of the workpieces andedit twice. All pairs of aggregates can be switched on/off separately de ...

working width: 950 mmworkpiece width - max.: 1,0 - 50 mmsandingbelt width: 970 mmsandingbelt length: 1900 mmweight of the machine ca.: 1,8 tThe SMD 123 RE is a universal entry-level machine for all-round deburringUniform edge rounding and surface grinding of sheet metaldry process. Suitable for processing steel, stainless steel and aluminium. The non-slip conveyor belt enables safe transport and theMachining even of small workpieces. The two rotor heads ensure an all-round uniformEdge rounding and a directionless finish. The intuitive operation via touch panel allows every employeeget to grips with the machine quickly. The SMD 1 models are installed and ready for operation in a short time. The compact design saves valuable production space. Low acquisition and operating costs lead to shortamortization periods and guarantee economical processing of yourworkpieces.consisting of:- Grinding  ...

diameter: -- mmworkpiece length: -- mmwork piece width: 0 - 20 mmspeeds: 2850 U/minrange of angles: 0 - 60 (stufenlos) °weight of the machine ca.: 19,5 kgMaximum chamfer width 20 mm + face machiningDesigned for chamfering and deburring straight edges, for theso-called FACING - removing an unwanted layer of material on theFront side of the workpiece, which is created, for example, by flame cutting a sheet metal.Specially developed for the production of visible chamfers andweld preparations. Powerful electric drive for extremeCharges. High performance motor stepless adjustment of the working angle in the range of 0° - 60° FACING - Edge processing at an angle of 0° to remove unwanted onesLayers of material after flame cutting The unique mechanical scale to adjust the bevel width for higherprecision A very compact and ergonomic design for high work productivity Circumferential protective ...

diameter: -- mmworkpiece length: -- mmwork piece width: 12 mmrange of angles: 30/45/22,5/37,5/50 °weight of the machine ca.: 30 kgChamfering system UZ12 ULTRALIGHT - KIT 30° + 45°Maximum bevel width 12 mm with automatic feedThe UZ12 ULTRALIGHT is one of the lightest automatic beveling machinesadvance in the market. Thanks to its compact size and light weightit is not only suitable for workshops, but also for assemblies. TheMachine is equipped with the automatic feed and therefore does thisWorking with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength),Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from an inner diameter of 95 mm Variable setting of the desired bevel using an exchangeable holder kitfor any given angl ...

diameter: -- mmworkpiece length: -- mmwork piece width: 15 mmrange of angles: 15-50 °plate thickness: 6-40 mmtotal power requirement: 1,5 kWFeed speed: 3,5 m/min.dimensions: 530 x 395 x 860 mmweight of the machine ca.: 94 kgChamfering system UZ12 ULTRALIGHT - KIT 30° + 45°Maximum bevel width 12 mm with automatic feedThe UZ12 ULTRALIGHT is one of the lightest automatic beveling machinesadvance in the market. Thanks to its compact size and light weightit is not only suitable for workshops, but also for assemblies. TheMachine is equipped with the automatic feed and therefore does thisWorking with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength),Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from an inner diameter of  ...

diameter: -- mmworkpiece length: -- mmwork piece width: 18 mmrange of angles: 15° - 50° °weight of the machine ca.: 110 kgChamfering system UZ18 HARDWORKERMaximum bevel width 18 mm with automatic feedThe UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on-site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient.For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Application range of sheet thickness 6 - 40 mm The bevel angle can be easily a ...

diameter: -- mmworkpiece length: -- mmwork piece width: 0 - 3 mmspeeds: 3600 U/minrange of angles: 30 - 60 (stufenlos) °weight of the machine ca.: 31 kgdimensions of the machine ca.: 530 x 420 x 410 mmMaximum bevel width of 3 mm - Mechanically adjustable bevel angleDesigned for deburring and chamfering steel parts and workpieces.Processing of different materials. Solid and stablemachine construction. Scale for setting the processing depth Security cover Adjustable processing angle For steel, stainless steel, aluminum and other materials Precise, massive and overlong mechanical guide- Number of indexable inserts: 5 pieces (four-sided)- Feed: manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

accumulator pressure: 780 bar0: 38 mlCapacity: 55 kWcontrol: Siemens KP400 weight: 3.300 kgPower connection: 80 kVAvoltage: Hz 50 / 3 x 400 Vrange L-W-H: 3.240x1.200x2.800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m-Max. flow rate: 38 l/min-Power HP pump: 55kW-Max. water temperature: 40 degrees-Operating voltage: 3x400V/50Hz-Connected load: 80kVA-Total current consumption: 115A-Curb weight: 2300kg-Control: Siemens Comfort Panel KP400The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 5,0 mmturning speed range: 1500 / 3000 U/mindiameter of brush: 250 mmwidth of brush: 80 mmvoltage: 380 Volttotal power requirement: 2,4 / 3,0 kWweight of the machine ca.: 175 kgdimensions of the machine ca.: 700 x 460 x 1200 mmDescription :RASAMAX DUO was specially developed for the fast and reliabledeveloped for deburring straight sheet metal. The deburring machinehas two counter-rotating deburring brushes thattwo offset levels. With this principle, upper andLower edge of sheet metal deburred simultaneously in one operation.This means up to 50% time savings compared to other methods!RASAMAX DUO is suitable for deburring individual pieces and small seriesand designed with its robust construction for continuous use.Furnishing:- efficient deburring of straight sheets- for steel, stainless steel, non-ferrous metalsThe data for this ad was created with ModulMWS - the softwar ...

Year: 1999 type: STL weight: 130 kgDeburring machineMake: RSAType: STLyear: 1999weight: 130 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: 2,860 rpm Approx. Onsite Dimension. (l x w x h): 330 x 330 x 1,160 mm, weight approx.: 24 kg

최대 휠 직경: 300 mm 기어 폭: 300 mm 최대 휠 직경: 400 mm최대 모듈: 1-20 최소 모듈: 1-10 공작물 회전 속도: 0 - 6 U/min총 전력 요구 사항: 0,5 kW기계 무게 ca.: 0,45 t

Description: Minimal Sheet Dimension: 300 x 300 x 1 mm Maximum Sheet Dimension: n/a x 1300 x 100 mm Maximum Sheet Weight: 100 kg Complete with manuals and all original documentaion. Includes ,extraction system Approx. Onsite Dimension. (l x w x h): 1,930 x 1,492 x 1,951 mm, weight approx.: 2,200 kg

년 2014 - 트윈 궤도 연삭/연마 패드. 추출 및 여과