지그 연삭기

코드 9602 설명 수직 JIG 그라인더 하우저 만들기 모델 3 SMO 일련 번호 257 기계 번호 1519-2564 테이블 표면 600 x 320 mm 테이블 이동 경도 (X) 400 mm 테이블 무브먼트 크로스(Y) 250 mm 최대 연삭 직경 190 mm 컬럼 스핀들 300 mm 스핀들 아래의 최대 높이 500 mm 수직 이동 스핀들 90 mm 수직 이동 연삭 헤드 500 mm 최대 속도 연삭스핀들 최대 80.000 omw./min 무게 2000 kg 총 전력 6,6 kW – 380 볼트 액세서리 연삭 스핀들 등 조건 기계는 양호한 상태에 있�

2축 디지털 디스플레이 이동 거리 X/Y/Z: 400/250/500 mm 광학 회전 테이블 D 300mm + 어댑터 플레이트 D 400mm 회전 회전 테이블 D 200 mm 많은 액세서리

Description: Year of construction: probably 1979 Serial number: 274 Smallest display unit: 0.001 mm Zero point can be selected as required Guaranteed positioning accuracy: 0.002 mm Power requirement of the machine: 7 kW Suction capacity of the air compressor: approx. 9 m³/h Working area: Usable table surface: 595 x 320 mm Adjustment range of the table: 400 x 250 mm Stroke of the vertical slide: approx. 500 mm Max. Clearance between the sanding motor and table: approx. 480 mm Distance between spindle center and vertical slide: 310 mm Max. Sanding diameter: approx. 220 mm Sanding diameter with intermediate plate: approx. 280 mm Max. included angle for conical sanding: 12° Sanding head: Vertical stroke of the sanding spindle, infinitely variable: 3 - 110 mm Stroke speed, infinitely variable: up to 6 m/min Speed of the planetary movement, infinitely variable: approx. 5 - 330 rpm Speed rang ...

스트로크 700 mm Y 스트로크 500 mm 공작물 높이 675 mm 테이블 표면적 900 x 770 mm 일광 컬럼 840 mm 선회 속도 범위 - 연삭 스핀들 9 - 45.000 rpm 총 전력 소비 6.5 kW 기계 무게 약 5.5 t 기계 치수 약 3.6 x 5 m 디지털 제어 액세서리 사용 - 응용 프로그램의 사진을 참조하십시오.

x-travel: 400 mmy-travel: 250 mmworkpiece height: mmControl: CNC 314 ELESTA total power requirement: 15 kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mH A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding MachineModel S 3 – CNC 314 Year approx.. 1990 S/N 32086 ____________________________________________________________Table size, approx. 600 x 380 mmMax. load on table, approx. 300 kgTable travel, longitudinal, max. (X Axis) 400 mmTable travel, cross, max. (Y Axis) 250 mmVertical adjustment of grinding head max. (W Axis) 450 mmStroke of grinding spindle, max. (Z Axis) 120 mmTable Longitudinal and cross feeds  ...

x-travel: 650 mmy-travel: 450 mmworkpiece height: 585 mmControl: ADCOS CNC 400 total power requirement: 15 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: mH A U S E R (Switzerland)CNC Controlled Hi Precision Double Column Jig GrinderModel S 40 – CNC 311 / ADCOS 400 CNCYear 1981 / CNC modernized in 2008 # 0126__________________________________________________________________ ___Table size approx. 630 x 770 mmTable load capacity approx. 500 kgTable travel longitudinal max. (X) 650 mmGrinding head slide cross max. (Y) 450 mmVertical adjustment of cross rail max. (W) 500 mmGrinding spindle stroke max. (Z) 140 mmStroke number of grinding head (4cycles)  ...

드로- 엘레스타 x-트래블 650 mm y 트래블 450 mm z-트래블 140 mm w-트래블(헤드) 500 mm 피드 범위 0 - 1500 mm / 분 테이블 표면적 770 x 630 mm 스핀들 속도 4.500- 80.000 분당 회전수 터빈을 가진 스핀들 속도 100.000- 160.000 분당 회전수 완벽한 상태. 시작 및 테스트 실행, 약 200 시간.

지그 연삭기 HAUSER S50

Description: Year of construction: probably 1986 Adjustment range: In the X-axis (table slide): 900 mm In the Y-axis (sanding head): 600 mm In the W-axis (moving crossbeam): 635 mm Feed speed: In the X- and Y-axis, direct current drive, infinitely variable: 5 - 2500 mm/min In the W-axis, three-phase drive: approx. 800 mm/min Measured value display: Smallest display unit: 0.001 mm Zero point can be selected as required Positioning accuracy (basic deviation X, Y): 0.004 mm Table: Usable table surface: 1020 x 860 mm Permissible table load: max. 800 kg Width of the T-slots: 14 mm Number of T-slots: 7 Distance between the T-slots: 100 mm Working range of the sanding head: Grinding spindle speeds, infinitely variable with electric motors: 4500 - 80000 rpm With air turbines up to 100000 and 160000 rpm Planetary speed, infinitely variable: 5 - 250 rpm Stroke of the grinding spindle sleeve: max.  ...

x-travel: 420 mmy-travel: 270 mmworkpiece height: - mmtable-size: 254 x 482 mmthroat: 254 / 318 mmgrinding spindle speeds: 12. - 60.000 U/min.spindle stroke: 92 mmspindle turning speed range: 90, 136, 184, 280 U/minnumber of strokes adjustable: 2 - 120 Hübe bei 51 mm0: 1,25 µm bei 30 mmRequired air-pressure: 7 barweight of the machine ca.: 1430 kgdimensions of the machine ca.: 1,45 x 1,2 x 2,4 mElectric 380 Volt: Tool cupboard: 2 Rotary table: Moore 254 mmGrinding head with air turbine: 4 x The Moore gauge grinding machine is equipped with grinding heads that are driven by an air turbine. There are 4 grinding heads available.Pneumohydraulically controlled up and down stroke movement, infinitely adjustable by valve 2-120 strokes at 51 mm travel, direct reading of the measuring spindles with vernier 0.001 mm, contour grinding, cone grinding, groove grinding, eccentric adjustment of the ...