벨트 그라인더

사양: 잡업 공간: 2400 x 800 mm 높이 조절: 550 mm 설치된 힘: 3개 Kw 수직 이동 속도 최대 벨트 길이: 6,650mm 풀리: Ø 200 mm

코드: 0021 상표: 보어 - 오스트리아 모델: 150/330 벨트 샌딩 머신용 샌딩 패드 단단한 나무 및 베니어용 흑연 벨트 샌더용 범용 샌딩 패드 - mm 330 x 150 전체 치수 mm 330 x 150 x 100 h 무게 kg 4

사양: 설치 전력: 5.5kW 플라이휠 2개 Ø 450 mm 샌딩 벨트 길이: 4900 mm 2가지 속도 설정

벨트 폭 : 150 mm 벨트 길이 : 2000 mm 벨트 속도 : 30 m / s 총 전력 요구 사항 : 3.6 kW기계 무게 약 : 138 t공간 요구 사항 약 : 995 x 490 x 890 mm장비 : 샌딩 벨트추가 충전을위한 흡입이있는 S 모델로도 사용 가능데이터 f & uuml,이 광고는 ModulMWS - LogoTech oHG의 기계 관리로 만들어졌습니다.

벨트 폭 : 75mm벨트 길이 : 2000mm 벨트 속도 : 30m / s연삭 면적 : 75 x 540mm 총 전력 요구 사항 : 3kW기계 무게 약 : 90kg공간 요구 사항 약 : 995 x 415 x 890mm장비 : 샌딩 벨트추가 충전시 흡입 가능한 S 모델로도 가능데이터 f & uuml,이 광고는 ModulMWS - LogoTech oHG의 기계 관리로 만들어졌습니다.

샌딩 유닛 수: 2 st.샌딩 폭: 약 180 mm 최대 샌딩 높이: 12 - 140 mm

Number of sanding units: 4 Stsanding width: 190 mmSanding height max.: 4-180 mmweight: 4200 kgHess Expert 4-belt single wood sanding machine--------------------------------------Ø Grinding at the bottom/topØ With 2 offset grinding units each (bottom and top)Ø Grinding units (bottom and top) connected in series according to theDressing principleØ Pre-sanding with coarse grit (calibrate)Ø Regrinding with fine grit (finish)Ø Central motorized height adjustment of the lower grinding unitsØ Central motorized and synchronous height adjustment of the entire upperGrinding and brushing units including the upper transport unitsØ Oscillating sanding belt utilization (during the sanding process)Ø Absolute power connection thanks to 5.5 KW motors and large dimensionsdrive drumsØ Oxide ceramic grinding shoe for- exact surface geometry- no adjustment work- permanent dimensional accuracy- comp ...

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sander---------------------------------basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profileswith additional, statically calculated bracing for optimalvibration damping.Staggered grinding units with large dimensionedBelt drive drums for slip-free belt travel. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet belt run. All guides as a ball linear set on hardened andpolished waves. Lasting precision thanks to protection against dust and dirtof the sphere linear sets. Contact roller and sanding pad in a balanced ratioto the grinding belt grain load. The large dimensioned drive drumsguarantee the full transmission of the ...

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sander---------------------------------basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profileswith additional, statically calculated bracing for optimalvibration damping.Staggered grinding units with large dimensionedBelt drive drums for slip-free belt travel. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet belt run. All guides as a ball linear set on hardened andpolished waves. Lasting precision thanks to protection against dust and dirtof the sphere linear sets. Contact roller and sanding pad in a balanced ratioto the grinding belt grain load. The large dimensioned drive drumsguarantee the full transmission of the ...

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sanding machine--------------------------------Machine in checking process at the moment!Basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimalVibration dampening.Staggered grinding units with large dimensionsBelt drive drums for slip-free belt running. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet tape running. All guides as a ball linear set on hardened andpolished waves. Permanent precision thanks to dust and dirt protectionthe ball linear sets. Contact roller and sanding pad in a balanced ratiofor sanding belt grain load. The large-sized drive  ...

대역폭 : 75mm 벨트 길이 : 2000mm 벨트 속도 : 37m / min총 전력 요구 사항 : 3kW기계 무게 약 : 110kg공간 요구 사항 약 : 1x0.5x1m데이터 f & uuml,이 광고는 ModulMWS - LogoTech oHG의 기계 관리로 만들어졌습니다.

벤치 벨트 샌더 Höfer 모터 4.2KW 형식 2.50 x 1.20 미터

목재 및 금속용 벨트 연삭기, 롤 간격 약 3000mm

Working width: 300 mmNumber of sanding units: 6 st.Workpiece thickness max.: 8-230 mmWeight: 3100 kgLöwer double-sided grinding machine DSM 3304 GDR---------------------------------Manufacturer short description:Double-sided single wood sander for sandingof solid wood such as window wood orFurniture components made of MDF etc. Stable top designwith electronic articulated pressure shoes for fine grindingwell-planed or veneered surfaces.Sanding units arranged one after the otherFine grinding, disc aggregates for defibering grinding,Cleaning brush, from above and below as follows:1. Belt sanding unit with articulated pressure shoe2. Belt sanding unit with articulated pressure shoe3. Disc unit with brush sanding flaps diameter 320mm4. Cleaning brush with Tempicofibre trim diameter 120mm---------------------------------detailed long text of the manufacturers description as well as theInstall ...

Number of sanding units: 8 st.sanding width: 180 (260) mmSanding height max.: 160 mmDimensions (length / width): 3065x1600x1900 mmweight of the machine ca.: 1500 kgLöwer Leistomad SDWindow single wood intermediate sanding machine---------------------------------Machine factory tested by Löwer!Automatic fine grinding machine for wood grinding (smoothing, defibering andEdge breaking) or intermediate sanding of profiled window bars. With soft discTechnology for the visible surfaces as well as automatically safe profile andWidth adjustment.- 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm- 1 softisc unit Ø=200mm above 0.75kW,- 1 slat roller unit L=200mm above 0.75kW- 1 soft disc unit Ø=200mm below 0.75kW,- 1 lamella roller unit L=200mm below 0.75kW,- 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm- Linear guidance of all grinding units via linear ball  ...

Number of sanding units: 8 st.sanding width: 150 mmMachine can be inspected during production!Leistomat - Finisch and intermediate leveling machine Löwer LZ 8-------------------------------------------------- -------------------for finish sanding (smoothing, defibering and edge breaking)or intermediate sanding profiled window latch- Finish and intermediate sanding machine with eight sanding blade aggregates,2 surface units at the top (synchronism / counter-rotation)2 surface units below (synchronism / counter-rotation)4 profile units with angled arrangement top right,bottom right, top left, bottom left, all mating- linear guidance of all grinding units overLinear ball bearing sets on hardened shafts- Timed immersion of all in the opposite directionrotating grinding units directly above the incomingWorkpiece edges to avoid looping through thePrimer in the front edge area. By theIt is pos ...

코드: 0198 상표: MABO - 이탈리아 모델: DELTA 나무, 금속, 알루미늄, 복합 재료를 위한 두 배 거위 목을 가진 벨트 모래로 덮는 기계 테이블 길이 mm 3000 테이블 폭 mm 800 자동 테이블 리프팅 - 수직 스트로크 mm 550 모터 2단 속도 rpm 1400/2800 - 마력 3/4 풀리 직경 mm 200 흡입 모터 Hp 0,5 비상사태 밧줄 흡입구 직경 mm 120 전체 치수 mm 4400 x 1100 x 1550 h 무게 kg 420

사양: 수평 벨트 연삭기 테이블 너비 mm: 800 테이블 길이 mm: 2,900 샌딩 벨트 폭 mm: 1,500 샌딩 벨트 길이 mm : 8,000 최대 작동 고도 mm: 600 주요 엔진 HP의 힘: 4 샌딩 슈즈 포�

스트립 폭: 75mm 밴드 길이: 2000mm 밴드 속도: 30m/s: 75 x 540mm총 전력 요구 사항: 기계 ca.의 3kW무게: 기계 ca.의 90kg치수: 995 x 415 x 890mm

판매 중고 샌딩 maschine steinemann. 위아래로 종이, 슈퍼 와이드, 200kw. 1990 yc. 짧은 사용.