植物を吹く3層箔

供給圧力: .バークーラント容量: . l拡張範囲: . mm

pressure: 100 tchamfer lenght: 3000 mmdistance between columns: 2700 mmControl: AMADA AMNC II-PC throat: 415 mmstroke: 200 mmdayligth: 500 mmadjustment of the rear stops: 600 mmtable width: 60 mmnumber of controlled axis: 7 ajustment speed: 200 mm/secbending speed: 20 mm/sectotal power requirement: 5,3 kWweight of the machine ca.: 6,7 tdimensions of the machine ca.: mIncludes:-Matrix holder for 1V matrices, pluggable, total height with holder: 140mm-Status indicator light-5-axis backgauge with stop sensor systemFolding robot: ASTRO-100 NTIncludes:-Standard gripper-Reposition gripper on the upper press beam-Regripping support for large workpieces - pneumatically drivenTechnical data see PDF attachment.Handling robot: ASTRO-MP20Includes:-Loading table with spreading magnets-Vacuum gripper Medium and Large-Combi gripper (suction/gripping) for vertical loading-Device for vertical loading of ...

Rated capacity: 2000 Wattwork piece lenght: 1075 nmTemperature range: 15 - 40 °Cdimensions: 550 x 1100 x 1200 mmtotal wight: 200 kgMobile laser welder with PenWelderhand-held PenWelder:- pulsed laser operation- average laser power up to max 500 W- Pulse duration 1 to 200 ms depending on application- peak pulse power 1000, 1500 or 2000 W- Siemens control- Integrated protective gas supply- Exchangeable -, adaptable process module (contact tips)- Pilot laser from laser source- Laser parameters via control panelLaser light cable LLK-A / BF 10:- Diameter(µ): 300 / 400 / 600- Length(m): 4 / 6 / 10 / 20Unit little usedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X軸:700 mmY軸:1.000 mmZ軸:500 mm最大テーブル荷重:900 kg総電力要件:kW機械の重量 ca.: t機械の寸法 ca.: m三次元座標測定機 - ソフトウェア付きPC、各種プローブ - Renishaw PH10MQソフトウェア:PC-DMIS Pro 3.7 Maintenance Release 2

x-travel: 2100 mmy-travel: 520 mmz-travel: 500 mmControl: Heidenhain type: TNC 426 table surface area: 2800x520 mmworkpiece weight: 1500 kgdist. milling spindle - table surface: 200-700 mmspindle turning speed range: 12-15000 U/minspindle diameter: 90 mmspindle taper ISO: 40 Tool changer: 30 Posspindle drive: 22 kWtotal power requirement: 50 KVAweight of the machine ca.: 11 tdimensions of the machine ca.: 5.500 x 2400 x 3000 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ベッド上の回転直径:920 mm サポート経由の回転直径:600 mm 回転長さ:12000 mmmFでの積載量:20トン 速度範囲:3.6 - 172 rpmボルト:380 V総電力要件:90 kW機械重量約:tスペース要件約:mこの広告のデータは� ��LogoTech oHGの機械管理であるModulMWSで作成されました�

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Xトラベル:980 mm Yトラベル:1080 mm Zトラベル:280 mm コントロール:テーブルサイズ:1.125 x 1.700 mm テーブル高さ:800 mm 直径:435 mm スピンドルピッチ:16 x 5 mm総電力要件:kW機械の重量 ca.:0,8 t機械の寸法 ca.:2,08 x 1,98 x 2,0 m付属品:- 工具交換ステーション - TS20プローブ - クランプシステ�

X軸:600mmY軸:300mmZ軸:200mm最大テーブル荷重:25 kg総電力要件:kW機械の重量 約:40 kg機械の寸法 約:m3D生産測定システム15インチモニター(搬送台車に 搭載)新品同様、4〜5回しか使用しな�

total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m6-axis industrial robot YASKAWA MH502 CNC rotary tables1. rotary table 1 and rotary table 2limited Nmax=1.300 1/minReduction ratio I= 1:72Nmax: Reduction ratio and Nmax motor corresponds to 120°/sec on the tableMdnenn. Output = 828 NmMaximum centric loading weight = 15 kNCentering force from inside to outside clamping = 7,540 N @ 6 barCentering accuracy in the gripper = 0.05 mm [PA]Rotary field restriction depending on cable and hose situationProvided for ± 720° (provide for this in the robot controller)Motor: YASKAWA SGMRV-20ANA-YR11Milling spindle: AMTRU (CH), type Flexicut 250Gearbox: ZAE Hamburg, type: S100B-1300/65-HOX-72.0:1-3000Version: with Yaskawa servo axis + ZAE worm servo gearboxThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ろ過性能: 。l /分フリース幅: . ミリメートル温度: .�

切削直径:280 mm 90度での切断範囲:フラット:380 x 260 mm 90度の切断面積:正方形:260 x 260 mm 速度範囲:40 / 80 m /分 バンドソー寸法:3440 x 27 x 0.9 mmモーターパワー:1.5 / 1.8 kW重量:670 kg電気油圧、半自動バンドソー、追加の手動および� �自動動的機能付き、45右から60左への切断用。いく� �かの機能:垂直ポストのスイベルコントロールパネ� �。 プリストレスト圧力軸受と交換可能なスチールイン� ��ートを備えたローラーベアリング上の420 mmロータリーテーブル。 ダブルベルト速度 (40/80 m/分)この広告のデータは、LogoTech oHGのマシン管理であるModulMWSで作成されました�

engine output: 375 kWcubic capacity: 12809 ccmdriven kilometers: 225000 kmallowable maximum weight: 18/56 Tgear box: automatic size of tire: 385/65R22,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: . mmwidth: . mmheight: . mmweight: . kgFahrbahrThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 y-travel: 1300 mm z-travel: 1450 mmコントロール: シーメンス 840C ツールチェンジャー: 100pos スピンドル回転: 10-4000 rpm ツールホルダー: Iso50 A 軸: -100/+10 c 軸: 360,000 0総電力要件: kW機械重量 約: tスペース要件 約: mこの広告のデータは、LogoTech oHG の機械管理である ModulMWS を使用して作成されました�

weight max.: 20 taxial load -forward: 9 taxis load in the back: 9 tBrake system: size of tire: 550/45-22,5 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar capacity: 1-16 mmturning length: 160 mmControl: Fanuc turning speeds: 100 - 12.000 U/minNumber of axles: 6 St.feed: 20 m/minbar length: 3 mtotal power requirement: 3,7 kWweight of the machine ca.: 3,40 tdimensions of the machine ca.: 6,37 x 1,10 x 1,95 m6 axes, 2 spindles:- Movable headstock: Z1, S1- 1 system of independent linear tool X1/Y1 (S3)- 1 independent pick-up spindle with a system of independent linear second tool:X2/Y2/Z2 (S2)- 1 system of independent tools in back machining: 3 tools1 x driven toolLoading magazine Bechler, integrated into the machine2-3 turning holders1 x cutter1 x drilling quillOperating hours: approx. 40500 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar capacity: 1-16 mmturning length: 160 mmControl: Fanuc turning speeds: 100 - 12.000 U/minNumber of axles: 6 St.feed: 20 m/minbar length: 3 mtotal power requirement: 3,7 kWweight of the machine ca.: 3,40 tdimensions of the machine ca.: 6,37 x 1,10 x 1,95 m6 axes, 2 spindles:- Movable headstock: Z1, S1- 1 system of independent linear tool X1/Y1 (S3)- 1 independent pick-up spindle with a system of independent linear second tool:X2/Y2/Z2 (S2)- 1 system of independent tools in back machining: 3 tools1 x driven toolLoading magazine Bechler, integrated into the machine2-3 turning holders1 x cutter1 x drilling quillOperating hours: approx. 40500 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

切削速度:15-90 m/分総電力要件:2,4 kW機械の重量:0,95 t機械の寸法:2,15 x 1,5 x 1,65 m

重量：。キロ摂取量MK:。 マシンバイスのための4倍のベーキングfüのための データ、この広告はModulMWSで作成されました - ロゴテックoHGのマシン管理�

x-travel: 3000 mmy-travel: 2500 mmz-travel: 1000 mmControl: Siemens type: 840 DFeed: 5-30.000 mm/minTable area: 2000x2170 mmtable load: 1500 Kg/m²T-slots: 22 H9distance between uprigths: 2500 mmspindle turning speed range: 6000 U/minspindle drive: 36 kWspindle taper: HSK 100Tool changer: 30 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 8x6,4x4,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

切断直径:350 mm 鋸バンドの長さ:5270 mm 切断幅:335 mm テーブルの高さ:800 mm切削速度:0-110 m/分総電力要件:16 A kW機械の重量約:1,5 t機械の寸法:2,2 + 2 RB x 3,5 x 1,9 m冷却水装置チップコンベア ローラーコンベア部門鋸�

x-travel: 250 mmy-travel: 200 mmz-travel: 90 mmcontrol: 5D HSC 6000 A-axis: +/- 180 °b-axis: +25 -15 °spindle turning speed range: 40.000 U/mintool taper: HSK 25 E min./max workpiece dia.: 3 - 10 mmtool change unit: 7-fach total power requirement: 7 kWweight of the machine ca.: 0,85 tdimensions of the machine ca.: 0,78 x 1,85 x 1,165 mThe machine for dental use- suitable for metal, plastic, wood and zirconium blanks- 5 axes simultaneously- Milling spindle HFS 201 quick-change (has been overhauled)- High-frequency spindle HFS 301 quick-change (5,000-40,000 rpm, 3000 watts)- Additional tool change magazine with 14 places (linear pick-up system with collision protection)- Tool length scanning- Control software on Windows XP Professional: Adoption of DIN 66025 commands (G-code)- W.Loader workpiece changer for up to 30 blanks- Max. height of blanks: 25 mm- Extraction unit for effective di ...

turning dia. over bed: 3.520 mmturning diameter over slide: 3.000 mmturning diameter over slide: 2.440 mmturning length: 15.000 mmControl: Sinumerik 840 D SL turning speeds: 50 U/minworkpiece weight max.: 80.000 kgturning diameter: orig. 3500 / mod. 2400 mmaccuracy +/-: 0,01 °total power requirement: 110 kWweight of the machine ca.: 154,4 tdimensions of the machine ca.: 20,7 x 6,0 m- The modernization (2012) carried out on this machine mainly comprises a new mechanical main gearbox including main spindle drive and the addition of a holding brake plus integration into the existing electrical system.- In the course of the work, it became apparent that the two double-row cylindrical roller bearings had to bereworked.Thus, the entire bearing arrangement was modified and optimally adjusted.- In addition, control and safety-related points had to be modified.- Geometric acceptance report- Temp ...