二手 RAS 出售

sheet width: 2040 mm plate thickness: 2.00 mm thickness at Niro-steel: 1.25 mm no. of strokes: 63 Hub/min cutting angle: 1.10 Grad table height: 750 mm distance between columns: 2120 mm back stop - adjustable: 0 - 550 mm column arm: 100 mm Control: manuell engine output: 2.8 kW weight of the machine ca.: 1100 kg. range L-W-H: 2650 x 1980 x 1400 mm Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - manual backgauge, with analogue position display adjustable from the front Continuous adjustment over the entire travel range Adjustment range 0.0 - 550 mm - Machine side stand with projection .. 100 mm - 1x hold-down bar - 1x long side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal slide - Connection cable including plug - original instruction man ...

型号： 74.40 数控折叠梁调节： 80 毫米 CNC枢轴接头调整：80 mm 最大工作长度：4060 mm 最大滴答声： 3 毫米 夹块之间的距离 -- 柱塞： 400 mm 最大回移距： 1550 mm

Thenbsp;Ras ductseamer 22.82 produces longitudinal seams along the edges of square or rectangular cross-section ducts. This duct seaming machine has 15 roller shafts which are equipped with seaming rollers, and nine further intermediate rollers are located in an overhead seaming bar. The RAS 22.82 is a very simple and reliable machine that can be easily operated by one person. max thickness: 1,25 mm

Ras 3200 x 4 mm CNC 最大工件长度： 3200 mm 最大回响度： 4 mm 夹块之间的距离 -- 柱塞： 400 mm 最大回移距： 1550 mm 电动马达 （功率）： 7，5 kW

max thickness: 3 mm roller dia: 94 mm speed: 4m/min min bendradius for 90° elbow: - thickness 0,5 gt; 1,5 mm = radius 100 - thickness 1,5 gt; 2,25 mm = radius 150 - thickness 2,25 gt; 3 mm = radius 200 min bendradius for 180° elbow and ring: - thickness 0,5 gt; 1,5 mm = radius 150 - thickness 1,5 gt; 2,25 mm = radius 300 - thickness 2,25 gt; 3 mm = radius 450 power: 2 kW weight: 270 kg

Ras 1020 x 2 mm Worklength: 1050 mm Sheetthickness: 2 mm Length: 2000 mm Width: 1060 mm Hight: 550 mm Weight: 444 kg

This RAS FLEXIbend 73.40 Bending machine was manufactured in the year 2005 in Germany. It is equipped with a SYSTEM 6000 TOUCH control unit. The machine has a bending length of 4060 mm.

This RAS 62.30 TURBObend Plus bending machine was made in the year 2004. It is equipped with a Ras CNC 6000 control unit. The machine has a sheet length of 2540 mm and a max. sheet thickness of 2 mm.

CNC-controlled edge bending machine, manufactured by RAS Germany-Reinhardt Maschinenebau GmbH type 64.12 - 1280 x 3.5 mm. Thickness of bent steel sheet (St40) 3.5 mm; bending length 1280 mm. Setting the bending angle up to 28 degrees from the desktop. Jaw opening 300 mm. 2.2 kW drive. Weight 1180 kg. Full DTR documentation. Lots of additional tools, strips for flattening sheet metal.

Ras FLEXIbend 73.30 Folding Machine Working length: 3200 mm Max thickness: 3 mm Working hour: 14.195 Upper Beam Stroke : 300 mm Machine is in excellent condition

Edge bending machine manufactured by RAS GmbH Germany -type 74.40 4060 x 3 mm. Multibend 901 control, color, 2D graphics, bending simulation. Automatic setting of the bending radius depending on the material thickness. Super simple and intuitive control operation. Jaw opening 300 mm. Large bumper departure up to 1500 mm. 7.5 kW drives. Weight 6800 kg. Full O&M documentation, diagrams.

We sell a rectangular air duct lock shaper. In good shape. Length 6000.0 Width 1000.0 Height 1500.0 Weight 1000.0 Advanced information Working length 2500.0 Max thickness 1.0 Motor power 3.0

model RAS 62.25 turbobend plus cnc control system 5000 year of manufacture 2002 max. sheet length 2540mm sheet thickness up to 2.25 mm rear bumper electrically extendable up to 1550mm weight 2500 kg very good condition, the machine is overhauled and oil changed

板材厚度：4，5毫米 折叠长度：2540毫米 深度后规：1500毫米 CNC品牌：_Unknown/其他 型号 74 . 25 1987年 ras MULTIBEND 8000 schwenkbiege 板材厚度（毫米）T = 4.5 毫米 折叠长度（毫米）L = 2.540 毫米 深度 后轨距（mm）深度 = 1.500 mm 2 衬托工具 上梁调整 = 400 mm 弯曲角度 = 0 - 180 Gr