二手 HERMLE 出售

品牌：赫姆勒 年份： 2002 型号： U 630 T 应用类型：铣削 地点： 德国 机床类型：加工中心（立式） 可用性： 27 11 2023 技术信息 一般数据 机器重量： 4800 KG 控制单元 品牌：海德汉 型号： TNC 426 主驱动器 主轴转速范围：10-7000 1/分钟 轴数：3 运动 X 轴运动：630 MM Y 轴运动：500 MM Z轴运动：500毫米 桌子 外长： 900 MM 外宽： 528 毫米 工作台承重：400公斤 附加信息 机器优势 技术机器优势： - 刀库：16

常规： 控制海德汉TNC 415 建造年份：1992年 行程 X 500 毫米 Y 360 毫米 Z 400 毫米 主轴转速 20 – 4，500 rpm 刀架 SK40 套筒行程垂直 75 mm 其他设备和随附的配件： 4轴作为转台 电动手轮 旋转巢 冷却液装置

主驱动 - 主轴电机功率在 2450 rpm 时 - 4.5 kW 主轴转速在四个切换阶段内 - 无级可变 速度范围 20 -4000，刀柄水平和垂直 ISO 40 液压夹刀 1200 daN，套筒行程垂直 80 mm 进给驱动 - 每个轴的单个直流电机 1 - 2000 mm/min 所有车轴的进给力 5400 N，所有车轴的快速移动 5 m/ 月 工作范围 - 长度 X 轴 500 mm，横向 Y 轴 360 mm，垂直 Z 轴 400 mm MESSYSTEM - 测量 X，Y，Z - 直接，分辨率 0.001 mm，输入细度 0.001 mm，显示步长 0.005 mm，分辨率第 4 轴 0.001 mm 工作台夹紧面 刚性角工作台 800x 390 mm T 型槽的数量和间距，宽度 T 型槽 6/63/ 14 h7 NC 转台 30 旋转第 4 轴 - 直径380 毫米 控制 屏幕 - 路径控制海德汉 TNC 115/ TNC 355 屏幕 - 路径控制 西门子 3 M4 810 M 冷却液系统 - 润滑 冷却液 - 容量 - 100 l 流量 16 ...

x-travel:600 mm y-travel:400 mm z-travel:420 mm table diameter:540 mm spindle turning speed range:20 - 4000 U/min spindle motor:6 kW spindle taper ISO:40 Table dimensions:900 x 460 mm feed range:1 - 5000 mm/min total power requirement:12 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:4,2 x 4,0 x 2,1 m Machine with CNC HEIDENHAIN TNC 415 automatic toolchanger 32 pockets measuring probe head coolant attachment fixed table hand operating panel

x-travel:800 mm y-travel:600 mm z-travel:500 mm turning speeds:8000 1/min tool change unit:30 tool adaptor:SK 40 Rigid table:1000 x 560 mm control:SIEMENS 840D total power requirement:43 kVA weight of the machine ca.:8 t 4-axis universal machining center, NC-swivelling table, rigid table (upgraded in 2007) internal coolant device, tool breakage-control (upgraded in 2002), el. compensation of thermal expansion, el. handwheel SIEMENS, chipconveyor, flush gun, oilmist suction, autom. door (upgraded in 2001) approx. h "machine on", approx. h "spindle on",

x-travel:875 / 630 mm y-travel:500 mm z-travel:500 mm table-size:900 x 528 mm table load:0,4 t control:Heidenhain TNC 426 tool adaptor:SK 40 turning speed range:20 - 7000 U/min rapid speed:15 m/min feed speeds:1 - 12.000 mm/min power requirement:7,5 / 12 kW quill stroke:75 mm no. of tools in the magazine:16 Pos. dimensions:2,40 x 2,03 x 2,11 m weight of the machine ca.:4,8 t Universal machining center / universal milling machine, ATC can be removed, then is x-travel 875mm, el. handwheel, 3D touchprobe, manuals, video per whatsApp possible

x-travel:850 mm y-travel:700 mm z-travel:500 mm turning speeds:10.000 1/min tool taper:SK 40 control:iTNC 530 HEIDENHAIN tool change unit:38 round table:2 x D 280 mm spindle:32 / 17 kW spindle:159 / 107 Nm rapid traverse:45 m/min total power requirement:43 kVA weight of the machine ca.:10,5 t dimensions of the machine ca.:2,4 x 3,2 x 2,9 m 5-axis machining center, NC-round-swivelling configuration dual round tables dia. 280 mm 3 D touchprobe RENISHAW, chip conveyor, tool-changing time (chip to chip) approx. 4,5 s, internal coolant supply thru spindle (40 bar / 600 liter), el. thermal compensation, airblast through spindle, el. handwheel, approx. 62.500 hours "machine on", approx. 19.900 hours "spindle on"

x-travel:800 mm y-travel:600 mm z-travel:500 mm turning speeds:15000 1/min tool change unit:30 tool adaptor:HSK 63 control:iTNC 530 HEIDENHAIN table load capacity:250 kg rapid traverse:30 m/min spindle drive:19 / 10 kW total power requirement:41 kVA weight of the machine ca.:8,5 t dimensions:3,4 x 2,7 x 2,9 m 5-axis-simultaneously machining center, NC rotary- swivelling table, A-axis +-110°, C-axis 360°, rotary table Diameter D = 280 mm, side clamping plates, electronic Handwheel Heidenhain HR 410, infrared touch probe HEIDENHAIN, electronic Compensation of thermal expansion, air blast outside, air blast through spindle, flush gun, standard coolant, no internal coolant supply, chic through no chipconveyor, cabin roof, prepared for oilmist suction, approx. 25.000 h "machine on. approx. 8.000 h "spindle on"

Description: Table diameter 800 mm Speed A-axis 13 rpm, ,C-axis 13 rpm max. tool length ,300 mm, max. tool weight 8 kg max. magazine plate load 120 kg last service report dated 29.06.2023 Includes documentation  , Attention: without the machine vices on the rotary/swivel table  , z-motion: 500 mm, x-motion: 1,200 mm, y-motion: 800 mm, control: HEIDENHAIN TNC 430, taper: SK 40, toolchanger positions: 87, turning speed range: 20 bis 15000 rpm, rapid motion: 30 m/min, weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 6,000 x 4,000 x 300 mm

Description: Complete with documents z-motion: 420 mm, x-motion: 600 mm, y-motion: 400 mm, control: HEIDENHAIN TCT 410, taper: ISO 40, weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 3,000 x 2,000 mm

Description: Machine number: 2199 Spindle speed: 50 - 900 rpm Feed rate: 10 - 370 mm/min Table dimensions: 600 x 180 mm With 3 grooves Travel distances: X: approx. 400 mm Y: approx. 300 mm Z: approx. 300 mm Incl. vertical milling head, collets and other various machine accessories weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm

Description: NC tool milling machine - Heidenhain TNC 114B - hydr. Tool clamping - Machine light - Coolant device x-travel 510 mm y-travel 450 mm z-travel 410 mm Table size 800 x 390 mm Spindle mount ISO 40 Speed range - vertical 50 - 2500 rpm Quill stroke 80 mm Spindle motor 3 KW Machine weight approx. 1.4 t Space requirement approx. 1.6 x 1.6 x 1.95 m weight approx.: 1,4 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,600 x 1,950 mm

Description: Serial number: 11166 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 23 A Total power: 16 kVA Control: HEIDENHAIN TNC 426 Tool holder: SK 40 Table dimensions: 900 x 460 mm Table weight: 275 kg Table load: max. 500 kg Number of T-sLot: 7 Distance between the T-sLot: 63 mm Width of the T-Slot: 14 H7 Travel distances: X: 600 mm Y: 450 mm Z: 500 mm Feed rate X-, Y- and Z-axis: 2000 - 10000 mm/min Feed force in all axes: 6000 N Rapid traverse in all axes: 10 m/min Spindle diameter in the front bearing: 75 mm Vertical quill stroke: 75 mm Measuring system: direct measurement X-, Y- and Z-axis Resolution: 0.1 m Angle table dimensions: 900 x 458 mm Number of tools: 34 pieces Magazine spaces: max. 90 mm With free adjacent spaces: max. 125 mm Tool length from spindle nose magazine: max. 250 mm Max. tool weight: 8 kg The machine is equipped with a 30-posit ...

Description: Serial number: 9712 Control: SIEMENS SINUMERIK 820M Table dimensions: 800 x 390 mm With 6 slots and an attached machine vise (jaw width: 100 mm) and a three-jaw chuck (diameter: 110 mm) Tool holder: SK 40 Travel distances: X: approx. 400 mm Y: approx. 400 mm Z: approx. 400 mm weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 2,000 x 2,000 mm

Description: Ser.Nr.: 18642, Control: HAIDENHAIN iTNC 530, Spindle: 18.000 rpm, Tool holder: HSK-A 63, 38 tool places, Scraper conveyor KNOLL 850 K-1, Compact filter KNOLL KF 200/1000/RSF, IKZ up to 80 bar, Laser tool measurement BLUM, Measuring probe M&,H, Total line: 41 kVA, Travels X/Y/Z: 850/700/500 mm, rapid traverse linear: 45 m/min, Read off operating hours: Control on: 62,613 h, Machine on: 58,922 h, Program run: 14,328 h, Spindle on: 11,132 h, Rigid clamping table 1,070 x 700 mm, max. table load 2,000 kg, T-slots 14 H7, Attention: Machine is offered without tools and without workpiece vice Approx. Onsite Dimension. (l x w x h): 3,150 x 2,400 x 2,900 mm, weight approx.: 11,000 kg

Description: Attention: Machine not functional control: HEIDENHAIN TNC 155, table surface area l x w : 990x490 mm, tool taper: SK 40, weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 2,300 x 2,200 mm

X 轴行程：510 mm Y 轴行程：450 mm Z 轴行程：410 mm 工作台尺寸：800 x 390 mm 主轴锥度 ISO：40 车削速度范围 - 垂直：50 - 2500 U/min 套筒行程：80 mm 主轴驱动：3 KW 机床重量 ca.：1,4 t 机床尺寸：1,6 x 1,6 x 1,95 m NC 刀具铣床 - Heidenhain TNC 114B - hydr。刀具夹紧 -机灯 -冷却液装置

travel -x axis: 850 mm travel -y axis: 700 mm travel -z axis: 500 mm control: Heidenhain TNC 530 turning speeds: 10.000 U/min numbers of positions in the tool changer: 195 tool taper: HSK-A 63 5-axis simultaneous machining center | HERMLE - C 40 UP equipped with ITC (80 bar) & tool changer and Pallet changer. Additional equipment: - Swivel axis and rotary table - 2 compartment plate changer (PW 800) - incl. 2x pallets 630 x 630 (diameter 800 mm) - tool breakage control by laser The machine is in a well-maintained condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 40 | C40 | C-40 | C40U The data for this ad was created with ModulMWS - the ...

Control: HEIDENHAIN TNC-430 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm B-axis (table): 280 mm table swivelabel +/-: 220 (+/-110) ° -C-axis table rotating: 360 ° tool magazin:: 30 spindle taper: HSK63 spindle turning speed - stepless: -15000 U/min rapid traverse feeds rotary table: 36 U/min rapid travel x/y/z: 36 m/min Overall size: 3800X3600X3000 mm weight of the machine ca.: 8.5 t Coolant through spindle: pressure: 40 Bar 3D measuring tracer: RENISHAW Chip conveyor: Coolant installation: SIEMENS 840D www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mm y-travel: 600 mm z-travel: 500 mm control: Sinumerik 840 D pl Siemens Main spindle:: turning speed range - main spindle: 20 - 28.000 min/-1 power capacity - main spindel: 23 / 18 kW max. Torque: 79 Nm tool taper: HSK-A63 NC-Tilting round table:: table surface area: Ø 630 mm Swivel range: A: +30° / -115 ° rotatable: C: 360 ° max. table load: 500 kg max. workpiece sizes: Ø 630 x 313 mm table speed: A:25 / C:65 min/-1 Tool-Presetter:: number of toolpositions: 117 pos. max. tool diameter: 90 (125) mm max. tool length: 300 mm feeds:: rapid traverse ( X / Y / Z ): 60 m/min Accelaration: 10 m/s² feed power: 8,5 kN total power requirement: 43 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 8,5 x 5,5 x 3,0 m Documents: high pressure coolant: Coolantsystem: through spindle coolant: 80 bar / 1.300l elektr. hand wheel: Automatic Tool Changer: 117 p ...

x-travel: 600 mm y-travel: 450 mm z-travel: 450 mm control: TNC 430 Heidenhain Main spindle:: turning speed range - main spindle: max. 10.000 min/-1 power capacity - main spindel: 7 / 9 kW tool taper: ISO 40 spindle bearing diameter: 70 mm measuring system: direct Resolution: 0,001 mm swiveling-rotary-table:: table surface area: Ø 280 mm max. table load: 250 kg Swivel range: +/- 110 ° rotatable: 360 ° Tool-Presetter:: number of toolpositions: 30 pos. max. tool diameter: 80 (125) mm change-time chip to chip: 5,5 sec feeds:: rapid traverse ( X / Y / Z ): 35 / 35 / 35 m/min feed speeds: 1 - 30.000 mm/min Feed force: 6 kN total power requirement: 30 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,5 x 3,5 x 2,8 m Documents: chip tray: Coolantsystem: hydraulic system: test probe: TS 632 elektr. hand wheel: Automatic Tool Changer: 30 pos. full splash guard: 5  ...

x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm control: Sinumerik 840D Siemens distance spindle /table: 100 - 500 mm Main spindle:: turning speeds: 8.000 min/-1 power capacity - main spindel: 10,5 kW tool taper: HSK 63 spindle diameter in front bearing: 70 mm work table:: table surface area: 1.000 x 560 mm max. table load: ca. 1.000 kg Tool-Presetter:: number of toolpositions: 30 pos. tool taper: HSK 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8 kg feeds:: rapid traverse ( X / Y / Z ): 35 m/min total power requirement: 31 kVA weight of the machine ca.: 7,0 t dimensions of the machine ca.: 3,5 x 3,0 x 3,0 m Documents: Chip conveyor: Coolantsystem: Automatic Tool Changer: elektr. hand wheel: CNC Machining Center Vertical HERMLE - C 800 V - Top-Condition ! - WITHOUT vices / WITHOUT tooling The data for this a ...

x-travel: 450 mm y-travel: 600 mm z-travel: 330 mm control: iTNC 530 Heidenhain Main spindle:: turning speeds: max. 18.000 min/-1 power capacity - main spindel: 31 / 17 kW max. Torque: 98 / 54 Nm tool taper: HSK A63 swiveling-rotary-table:: rotary table dia.: 320 mm Swivel range: A: +/- 135 ° rotatable: C: 360 ° max. table load: 300 kg Number of revolutions: A: 25 / C: 40 rpm T-slots: 4x 14H7 Tool-Presetter:: number of toolpositions: 55 pos. tool taper: HSK A63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 250 mm max. tool weight: 8,0 kg max. total weight: 220 kg change-time chip to chip: 4,5 sec feeds:: Accelaration: 8 m/sec² Feed force: 4,5 kN rapid traverse ( X / Y / Z ): 30 m/min total power requirement: 40 kVA weight of the machine ca.: 9,0 t dimensions of the machine ca.: 6,5 x 6,5 x 3,5 m Documents: NC-Rotary Swiveling Table: Automati ...

x-travel: 500 mm y-travel: 360 mm z-travel: 400 mm Control: Siemens 810 tool taper: SK 40 table surface area: 800x390 mm T-slot - width: 14H7 mm number of T-slots: 6 T-slot - distance: 63 mm turning speeds: 20-4000 U/min transmission ratio: 4 Feed: 1-2000 mm/min rapid traverse: 5 m/min total power requirement: 9 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,5x2,9x1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x 行程： 700 mm y 行程： 550 mm z 行程： 500 mm 主轴架 ISO： 40 控制： 海德汉 类型： TNC 155 头旋转 +/-： 钻孔主轴： 总功率要求： kW 机器重量 约： t 空间要求 约： m 技术数据是制造商或操作员的规格，因此对我们 无约束力。我们保留进行事先销售的权利，我们的业� �� 和销售条款和条件仅适用 。 关于我们 超过400台自有机器在仓库 超过8500平方米的存储区域，起重机容量70吨 以上超过1000件配件为您的车间 如果您想出售机器生产线或您的公司， 请与我们联系。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

x 行程： 600 mm y 行程： 400 mm z 行程： 420 mm 控制： 海德汉 TNC 415 工作台尺寸： 900 x 460 mm 速度： 20 - 4500 rpm 主轴驱动： 8.6 kW 刀柄： SK 40 Pinole 行程： 75 mm 快速横移 X / Y / Z 轴： 7 / 7 / 6 m/min 总功率要求： 12 kVA 机器重量约： 3 t 空间要求 约： 2.8 x 2.2 x 2.1 m 配备： - 数控控制海德汉TNC 415 -电气手轮 刚性角度工作台 - 夹紧/副全模160 型 - 冷却液外部 - 机器灯 本广告的数据是使用ModulMWS创建的 - LogoTech oHG的机器管理。

x 行程：600 mm y 行程：400 mm z 行程：420 mm 控制：TNC 355 HEIDENHAIN 主轴架 ISO：40 主轴转速：20 - 4，000 rpm 工作台尺寸：900 x 460 mm 进给无级可调：1 - 6，000 mm/min 快速横移：7.0 m/min 驱动功率：5.9 kW 皮诺尔行程：75 mm 冷却液装置： 工作电压：380 V 总功率要求：13.0 kW 机床重量约：2.3 t 空间要求约：2.60 x 2.35 x 2.20 m - 工厂编号： 9079 - 控制： TNC 355 海德汉 - 卧式铣削主轴 - 中央润滑 - 冷却液装置 数据 fü， 此广告是用 ModulMWS 创建的 - LogoTech oHG 的机床管理。

x 行程： 410 mm y 行程： 310 mm z 行程： 400 mm 刀具锥度： ISO 40 主轴车削速度范围： 40 - 2000 U/min 工作台尺寸： 700 x 280 mm 表面积： 830 x 224 mm 总功率要求： 2，2 kW 机床尺寸 校准： 1，4 x 2，1 x 2，0 m 控制： Heidenhain TNC 145

x-travel: 400 mm y-travel: 330 mm z-travel: 350 mm total power requirement: 6,3 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 736 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm Control: Heidenhain 430 ITNC tool taper: SK 40 spindle turning speed - stepless: 13465 U/min voltage: 400 V control voltage: 24 V weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x 行程： 600 mm y 行程： 450 mm z 行程： 400 mm 工作台尺寸： 850 x 440 mm 主轴架： SK 40 控制： HEIDENHAIN TNC 355 换刀装置： 32 Pos 主轴转速： 20 - 4000 rpm 主轴电机： 5.9 kW Pinole 行程： 80 mm 给料机 - 纵向/横向/垂直： 1 - 2000 mm/min 进给力 x/y/z： 7200 N 快速横移 纵向和横向： 10 m/min 快速横移 垂直： 10 米/分钟 总功率要求：12 千瓦 机器重量 约： 3 吨 尺寸 长 x 宽 x 高： 2.7 x 2.5 x 2.0 米 Zbh.： NC 分频器（=第 4 轴） Fabr.瓦尔特，带 160 mmø 的 3 爪卡盘， 带液压旋转垂直头。刀具夹具和可 伸缩销钉，固定工作台，各种刀柄，电子。 手轮，冷却液设备 本广告的数据是使用ModulMWS创建的 - LogoTech oHG的机器管理。

x-travel: 850 mm y-travel: 630 mm z-travel: 550 mm table surface area: 1200 x 550 mm spindle taper: SK 40 spindle turning speed range: 20 - 4200 U/min spindle drive: 11,5 kW quill stroke: 95 mm feeds longditudinal/cross/vertical: 1 - 10.000 mm/min rapid traverse longitudinal and cross: 10 m/min rapid traverse vertical: 10 m/min control: HEIDENHAIN, TNC 426 total power requirement: 21 kW weight of the machine ca.: 6 t dimensions of machine L x W x H: 4,95 x 2,30 x 2,30 m Accessories: NC-dividing unit (= 4th axis) with tailstock, make HOFMANN, model RWNC-160, vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

： 控制： Heidenhain TCN 355 ： 8391

x-travel: 510 mm y-travel: 450 mm z-travel: 410 mm taper in main spindle: MAS BT 45° (SK40) table surface area: 800 x 395 mm T-slots: 6 turning speeds: 50 - 2500 U/min feed stepless: 4-1600/4-1000 mm/min voltage: 400 V total power requirement: 5,0 kW weight of the machine ca.: 1400 kg range L-W-H: 2300 x 2300 x 1800 mm from a training workshop maintained condition () Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left Digital display - without function Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9131203 The d ...

x 行程： 600 mm y 行程： 400 mm z 行程： 420 mm 控制： 海德汉 Tnc 工作台尺寸： 900 x 460 mm 速度： 4000 rpm 总功率要求： kW 机器重量 约： 2.9 t 空间要求 约： 3 x 2 x 2 m 此广告是使用 ModulMWS 创建的 ， LogoTech oHG 的机器管理。

X 行程： 850 毫米 y 行程： 440 毫米 Z 行程： / 毫米 控制： TNC 355C

Control: Heidenhain TNC 186, length: 2600mm, width: 3000mm, height: 1900mm, weight: 2.4t, with documentation, and SK40 mountings, the machine is electrically and control-technically not ready for use, mechanically the machine is in order, maintenance was carried out regularly, an inspection on site is possible.

X-travel: 600mm, y-travel: 450mm, z-travel: 450mm, table dimensions: 800x450mm, max. rotational speed: 16,000/min, rapid traverse: 35,000mm/min, controls: HEIDENHAIN TNC 430M, connected load: 30kVA, length: 2150mm, width: 2360mm, height: 2700mm, weight: 6.5t, operational hours counter controls/ machine/ spindle: 44,884/ 44,079/ 12,762h.

Controls: Heidenhain TNC 150, length: 3600mm, width: 3000mm, height: 1900mm, with documentation, the machine is not functional, the control has fire damage, an on-site inspection is possible.

Spindle rotational speed: 100-1300/min, without documentation or accessories.

X-travel: 630mm, y-travel: 500mm, z-travel: 500mm, table diameter: 900x528mm, NC rotary table diameter: 500mm, connected load: 14kVA, length: 3600mm, width: 3900mm, height: 2100mm, weight: 6t, with documentation.

This HERMLE C20U Vertical Machining center was manufactured in the year 2007. It is equipped with a HEIDENHAIN TNC 530 CNC control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. There are 2 identical units available.

This HERMLE C30U Vertical Machine Center was made in the year 2006. It is equipped with a HEIDENHAIN TC 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. There are 2 identical units available.

This HERMLE C 600 V Horizontal Machining center was manufactured in the year 1998 in Germany and has 29289 spindle hours. It is equipped with a HEIDENHAIN TNC 430 M control unit. It is included a Touch probe, a Tapping without compensating chuck and Tool life monitoring.

This HERMLE C20U Vertical Machine Center was built in the year 2008. It is equipped with a HEIDENHAIN TNC 530 CNC control unit and has 5 axis. The machine has a spindle speed of 18000 rpm.

This HERMLE C800U Vertical Machining center was manufactured in the year 1999 and has 25844 production hours. It is equipped with a HEIDENHAIN TNC 430 control unit and has 5 axis. The machine has a spindle speed of 15000 rpm.

This 5-axis HERMLE C22 Machining center was manufactured in 2017. It includes an integrated handling system, IH30, designed to enhance automation and efficiency in production. The compact yet robust configuration of this machine allows for versatile milling applications with precision and reliability. The advanced control system ensures optimal performance and supports complex milling operations demanding high accuracy. The HERMLE C22 machine we have for sale is expertly crafted to meet stringent manufacturing requirements. Contact us for further details regarding this machining center.

This Hermle U 630 T Vertical Machining center was made in 2002. It is equipped with a HEIDENHAIN TNC 426 control unit and has 3 axis. The machine has a spindle speed of 10-7000 rpm.

Weight approx. 650kg