X-axis: 2000mm, y-axis: 400mm, z-axis: 560mm, connected load: 23kVA, weight: 4.7t, fourth axis axis with tailstock, ran in two-shift operation, on-site inspection is possible.
This CHIRON DZ15W MAGNUM HS Vertical Machining Centre was manufactured in 2015. It is equipped with a FANUC Series 31i-model B5 control unit, has 4 axes and a 12000 rpm spindle. The machine comes with swarf conveyor, tooling, coolant / paper filtration unit, high pressure coolant and pallet.
This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm.
This CHIRON DZ24 WM HS Vertical Machining center was manufactured in the year 2015 in Germany. It is equipped with a Fanuc Series 31 i â MODEL B5 control unit and has 4 axis. The machine has a spindle speed of 15000 rpm.
This CHIRON MILL FA 800 vertical machining center was built in the year 2006 in Germany. it is equipped with a Siemens Sinumerik 840D control unit and has 5 axis. The machine has a spindle speed of 12000 rpm.
This CHIRON MILL 800 Vertical Machining center was manufactured in the year 2015 in Germany. It is equipped with a SIEMENS SINUMERIK control unit and has 5 axis.
This CHIRON FZ15W Vertical Machining center was manufactured in the year 2001. It is equipped with a Siemens SINUMERIK 840D control unit and has 3 axis. There are 2 units available.
This CHIRON FZ15W Vertical Machining center was manufactured in the year 2002 in Germany. It is equipped with a Siemens SINUMERIK 840D control unit and has 4 axis.
This CHIRON MILL 2000 Vertical Machining centre was manufactured in the year 2005 in Germany. Contact us anytime for further questions.
This Chiron FZ18 Vertical Machining center was manufactured in the year 1995 in Germany. It is equipped with a SIEMENS SINUMERIK 810M control unit and has 4 axis.
equipped with 24 stations tool exchange magazine; including 1 Alexander Bürkle 6-axis handling robot unit (1000x1200x2050mm); 1 KNOLL filter installation, type KF 150/500 and chip discharge conveyor
equipped with KNOLL fitter installation, type: KF 150/500 ( 2014)
equipped with tool change magazine; including 1 KNOLL filter installation, including 1 Alexander Bürkle 6-axis handling robot unit (1000x1200x2050mm) type: KF 150/500 and chip discharge conveyor
巨浪型号 FZ18W MAGNUM 4 轴 立式加工中心,带轮盘和双 4 轴 20 TOOLS ISO 40 工具更换:2.1 秒 主轴:20 - 8000 RPM,18,5k kW X = 625 Y = 400 Z = 400 Rapids 40m/min 工作台面积:2 x 900 x 470 - TSUDAKOMA 重型双 4 轴(日本) 360.000 位置 - 原装 HAWE 液压单元 - FANUC 0M 1995 可以在我们的仓库 Mimu 机床(意大利)进行动力检查, X: 625, Y: 400, Z: 600, 第 4 轴: 是, (2x) 津田驹 360 000 pos.
凯龙FZ15KS高速立式加工中心 技术数据:行程x:550mm y:400mm z:360mm第4轴原装测向仪CNC西门子840D工作台工作区域10 50 x 450mm换刀装置48x刀柄SK 40速度范围可达12000 1 /分钟第4轴雷尼绍刀具破损监控IKZ Spaenefoerderer机器在我们的仓库中, 动力下米姆机床(意大利),X:550毫米,Y:400毫米 Z:360毫米,第4轴:360.000位置,雷尼绍:
MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 â 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...
Chiron FZ18W Magnum rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor 6 ton 3,6 x 2,25 x 2,85 machine can be inspected under power in our warehouse Mimu Machine Tools (Italy)
Chiron FZ15KS HIGH SPEED, 4 axis vertical machining center, X: 550mm, Y: 400mm, Z: 360mm, 4th axis original Peiseler 360.000 pos, CNC Siemens 840D, Table 1050 x 450mm, Toolchanger 48 pockets, ISO 40, Spindle 12000 1/min, Renishaw tool control, Coolant through spindle, Hydraulic clamping, Swarf conveyor, Under power in our warehouse in Gussago BS, Mimu machine tools, Spindle: 12000 RPM, 4th axis: 360 000 pos
5 axis machininng center (milling/turning from bar), Under power in our warehouse, MAKE CHIRON, MODEL MILL 800 5 axis, CNC Fanuc 18iMBS (5 simoultaneous axis 1), X, Y, Z (mm) 800 â 500 - 550, Rapids (Highspeed) 60 m/min, Swivelling head CNC controlled (B axis) +/- 100°, Turning spindle Peiseler, Milling spindle 12.000 giri / 140 Nm (v nota 2), Tools 65, Tool type HSK-A 63 DIN 69893, Tool-change time 1,5 sec (v nota 3), Table 1400x500, Max table load 1200 kgs, Coolant through spindle 70 bar (see note 4), CNC controlled clamping/rotating unit for 6th face machining (v. nota 5), Pressurised linear encoders, Swarf conveyor, Renishaw-ready, Y.O.M. 2006, Weight 7500 kgs, Turning package, Max dia 65mm, RPM: 15 / 4500, Max 42,5 KW / 90 Nm., Hydraulic clamping 800 Nm., Bar loader ILS-RBK- 10012 65, Diameters min/max 5/65 mm L= 600-1200 mm, Highspeed (2), 60m/min., Spindle 20-12.000 min.â ...
MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 â 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...
Vertical machining center CHIRON FZ08W 2 pallets 12 HSK32 tools Spindle 15000 rpm HSK-32 rotopallet (2 pallets) CNC Fanuc 21iM chip conveyor The machine is under power in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing several mechanical operations with a single set-up on multiple surfaces of the same piece of work. It is generally equipped with several motion axes and one automatic tool exchange system and sometimes multiple pallets, CNC type: Fanuc 21iM, Number of pallets: 2, Spindle revolutions: 15000
凯龙FZ15KS 4轴立式加工中心 X: 550mm Y: 400 mm Z: 360 mm 原装佩塞尔 4 轴西门子 840D 数控 工作台表面 1050 x 450 mm 换刀 48 后 ISO 40 主轴转速高达 12000 rpm 雷尼绍破损刀具检测仪 冷却液通过主轴排屑
Sinumerik 810M GA3 Basket tool changer: 20 x SK30 Tool change under 2 seconds. Spindle Max: 10500 rpm Table size: 2x (660mm x 350mm) Axes travel: X= 550mm Y= 300mm Z= 425mm B= 360 degrees (4th-axis) Under rotary table on the left: Yes. Coolant unit with Knoll swarf conveyor. Weight: 4000Kg CRT screen was upgreaded to TFT. Equiped with 1x 4th axis
X axis movement : 630 mm Y axis movement : 400 mm Z axis movement : 630 mm Double table Table size : 620 mm x 940 mm Machine has been used on aluminium
Chiron FZ08KW MAG Vertical Machining Center With 4th Axis Siemens 840D Control Unit 15 000 rpm Double table Double dividing head(Peiseler) Renishaw probe All maintenance has been done Chiron Turkey
Well-maintained machine from automotive parts series production (CPK capable) with reinforced spindle drive and Fanuc 18i CNC control. Kessler spindle max. torque (25%) 392 Nm 4th NC-axis Peiseler ZAS 280 distance 980 mm Milling capacity in St 60: 700 cm3/min Drilling capacity in St 60 with HM drill: 50 mm Thread cutting: M36 HSK 63A - 20 tools Chip to chip 2.1 s Speed 8,000 rpm Rapid traverse up to 60 m/min Acceleration up to 0.7 g Knoll coolant system PF50 with scraper belt conveyor and paper belt filter Coolant through spindle 30 bar Automatic doors front spindle bearing diameter 70 mm Tool tension 8 000 N X-axis travel 800 mm Traverse path Y-axis 520 mm Feed force X -/ Y-axis 5,000 N Travel Z-axis 630 mm Feed force Z-axis 10,000 N Gyuhsc Axis acceleration X, Y-axis / Z-axis 0.5 g / 0.7 g Rapid traverse speed 60 m / min Coolant through spindle up to 30 bar ...
Itâs had very little use over the last few years. Has to be the most productive machine in its class. YOM: 2001 Control: Fanuc 21iM Spindle: 15000 RPM Swarf Conveyor Includes all spindle tooling and custom Microloc work holding bases & clamps (as seen in the photos). We have all the manuals, operation, programming, maintenance, spares and electrical.
Chiron DZ 18 W Magnum Vertical Machining Center Double table Double spindle Machine is in good working condition
5-axis CNC vertical machining center Chiron Control system: SIEMENS SINUMERIK 840D Axis travel: X axis 800 mm, Y axis 630 mm, Z axis 550 mm Spindle speed: 12,000 rpm Spindle power (max.): 22.5 kW Torque (max.) 140 Nm NC-rotary round table: Swivelaxis technology with NC-round table by 280 mm, A-axis +/- 110°, C-axis 360° Load capacity of the rotary table (max.): 320 kg Tool magazine: 40 positions Spindle taper: HSK-A 63 Tool: o 75 mm Tool length: 320 mm Tool weight (max.): 4 kg Dimensions Machine weight: 7,800 kg Accessories: Chip conveyor, Direct scales position sensor, KNOLL cooling unit and filter device with filter belt and 900 liter tank, high-pressure cooling 70 bar, preparation for workpiece measurement, touch probe, hydraulic workpiece clamping 200 bar, oil separator, pneumatic automatic opening door, extraction with air filter.
X axis : 550 mm Y axis : 400 mm Z axis : 420 mm Double table Double Spindle Table size : 460/580 Spindle taper : HSK63 Fanuc Control Machine is in good condition
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: GE Fanuc Series 18i-MB5 Operating hours: 34031 Technical data Number of axis total: 3 Number of spindles: 1 Table length: 770 mm Table width: 290 mm Longitudinal travel (X-axis): 450 mm Transversal travel (y-axis): 270 mm Vertical travel (z axis): 310 mm Drill capacity: 12 mm Max. taping diameter M: 8 Tool changer: Number of tools: 24 Tool diameter max.: 47 mm Diameter with free adjacent pockets: 100 mm Tool lenght: 160 mm Max. tool-weight: 1.2 kg Time of tool changing: 0.8 / 2.3 sec Average chip-to-chip time: 2.2 sec Spindle nose: HSK-A: 40 DIN 69893 Spindle speeds: up to: 30000 rpm Rapid traverse:: 75 m/min Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle motor: 7 kW Total power required: 14 kW Various acces ...
技术数据 工作台长度:280 mm 工作台宽度:280 mm 电压 50 Hz 3x:400 伏 特 功率:1.5 千瓦 机器重量约: 350 kg 整机尺寸机器: 长度:800 mm 宽度:700 mm 高度:2200 mm 各种附件: 分离器 à 双电
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 810 M Operating hours: 15198 Technical data Number of axis total: 3 Table length: 2280 mm Table width: 450 mm Number of T-channels: 3 Distance of the T-slots: 150 mm T-channel width: 18 mm Longitudinal travel (X-axis): 2000 mm Transversal travel (y-axis): 400 mm Vertical travel (z axis): 425 mm Tool changer: Number of tools: 20 Tool diameter: 65 mm Diameter with free adjacent pockets: 180 mm Tool lenght: 220 mm Max. tool-weight: 8 kg Spindle nose SK: 40 DIN 69871 Vertical spindle speeds: stepless from: 20 rpm up to: 10500 rpm Feeds: Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle motor: 18 kW Total power required: 31 kVA Machine´s weight about: 7200 kg Overall dimensions machine: Length: ...
Table length: 450 mm Table width: 300 mm Longitudinal X: 300 mm Cross Y: 250 mm Vertical Z: 250 mm Positions ATC: 12 Positions APC: 2 CNC Brand: Fanuc 3-axis CNC machine (VMC)CHIRON - FZ08W MACH-ID 7652 Make: CHIRON Type: FZ08W Control: Fanuc 21-M Year: 1998 Pallet changer 2 tables 450 x 300 x 75 Kg Workpiece rotation station 180 Gr Large Tooling package HSK-32 Coolant system 100 Liter X - Travel: 300mm Y - Travel: 250mm Z - Travel: 250mm Table Length: 450mm Table Width: 300mm Table load: 75 Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: &nbs ...
Table length: 850 mm Table width: 470 mm Longitudinal X: 630 mm Cross Y: 400 mm Vertical Z: 425 mm Positions ATC: 20 Positions APC: 0 CNC Brand: _Unknown / Other MACH-id 5417 MAKE CHIRON TYPE FZ 18 W MAGNUM high speed YOP 1997 SPECIFICATIONS X - Travel 630 mm Y - Travel 400 mm Z - Travel 425 mm Table Length 850 mm Table Width 470 mm Table load 250 Kg Feed rate X-Axis 30.000 mm/min. Feed rate Y-Axis 30.000 mm/min. Feed rate Z-Axis 30.000 mm/min. Spindle Taper 40 ISO/ ...
Table length: 950 mm Table width: 360 mm Longitudinal X: 550 mm Cross Y: 300 mm Vertical Z: 280 mm Positions ATC: 12 Positions APC: 0 CNC Brand: Fanuc CNC Model: OM MACH-id 3684 MAKE Chiron TYPE FZ 12 S YEAR 1993 SPECIFICATIONS X - Travel 550 mm Y - Travel 300 mm Z - Travel 280 mm bed / plano / portal / moving column vertical machingcentre Controll FANUC OM Table Length x Width 950 x 360 mm Table load in kG 250 Kg Spindle Taper Sk 40 kW power on spindle 5.5 kW Spindle speeds / ranges 7100 Rpm ATC tool changer 12 ? DIMENSIONS Length 2920 mm Width 2400 mm Height 2680 mm