フルーツ野菜デリカテッセンインスタントミールマシン 中古 販売のため

1 piece dosing filler type K 12”, - without control cabinet, for filling thin or viscous products into glasses., Glass size: 28 g glass Ø 44.5 x 51.4 mm height TO 43, Product: fruit spreads, jams, ketchup, mustard etc., Product pieces: up to 10 x 10 x 10 mm, Filling temperature: up to approx. 85°C, Dosage range: 25 to 250 ml, Performance: depends on product and glass size, up to approx. 120 fillings / min., Product tank: 120 liter capacity instead of 45 liters, The dosing filler is specially designed for filling thin and thick liquid as well as pasty products, suitable. It can be a partial dosage or a full filling in cans, jars and, bottles., Depending on the product, the filler can be used for cold or hot filling., The system is constructed in a completely rust-free design. The dosing filler does not have its own, Belt body and can therefore be attached to an existing conveyor belt. ...

The rapid steam generator is installed in a 20 ́High Qube container including a Weißhaupt Monarch heating oil burner, economizer, stainless steel feed water tank, water treatment, blowdown vessel, chimney, etc, Power: 1,118 kW, Perm. Operating pressure: 12 bar, All documentation and test book are available., The return to service and the associated acceptance and repairs are the responsibility of the buyer; the container is sold without any guarantee or return claims; this is taken into account in the offer price.

Ferrum Entsteinmaschine用スリッター装置、タイプEA、25個の新� �い丸ナイフを装備し、50個の穴のあるプレート、例� ��ば34/20(プラム)に適しています。 この装置では、孔食中にまだ分割されている果物は� ��スコアリングナイフによって下側で切断されます� �その結果、石が排出されたときに果物が傷つくこと はありません�

さくらんぼ21-12の孔食プレート、オリジナルフェラ� �プレート、108穴、外径:21 mm、内径:12 mm、非常に良好な状態� ... 詳細情報

さくらんぼ21-12用孔食プレート、オリジナルフェラ� �プレート、50穴、外径:29 mm、内径:20 mm、非常に良好な状態� ... 詳細情報

プラム41-34用の20個の孔食プレート、オリジナルフェ ラムプレート、50穴、外径:34 mm、内径:20 mm、非常に良好な状態� ... 詳細情報

電動ピストンポンプ、半自動、充填ステーション、� ��ラダドレッシングに使用、充填量:ストロークあた� ��最大200ml、ローラーで移動可能、出力:最大約400ボ� �ル/時間、寸法/重量:長さx幅x高さ:2,000 x 600 x 1,800 mm ... 詳細情報

4つのキャッピングステーション、ピルバープルーフ 付きプラスチッククロージャーに使用、外径:約31.5 mm、寸法/重量:長さ x 幅 x 高さ:約1,900 mm x 1,400 mm x 2,430 mm ... 詳細情報

 ... 詳細情報

Ferrum Entsteinmaschine用スリッター装置、タイプEA、25個の新� �い丸ナイフを装備し、50個の穴のあるプレート、例� ��ば34/20(プラム)に適しています。 この装置では、孔食中にまだ分割されている果物は� ��スコアリングナイフによって下側で切断されます� �その結果、石が排出されたときに果物が傷つくこと はありません�

FAM piston filling machine for pasty products,, below level filling,, rotary machine with 10 stations,, Cylinder diameter: approx. 100 mm, cylinder length: approx. 390 mm,, Piston: diameter: approx. 100 mm, height: approx. 250 mm,, set up for container diameter: approx. 56 mm,, 2 sets of filling nozzles: filling opening 11 and 17 mm, filling tube length: approx. 162 mm,, Plastic conveyor belt, belt width: 85 mm,, Overall dimensions: 2,750mm x 1,500mm x 2,400mm., With pallet with s/s tank and control cabinet,, Internal tank dimensions: Ø 580 m x 690 mm,, Tank dimensions: 770 mm x 600 mm x 1570 mm,, Dimensions control cabinet: 800 mm x 600 mm x 2100 mm, and with trolley with parts,, Dimensions trolley: 1150mm x 600mm x 950mm and pallet with parts., Stainless steel platform with galvanized steel plate, dimensions: 2050mm x 1700mm x 3500mm

Fully automatic labeling machine for self-adhesive labels K7,, Hourly output 500-800 labels / h, compact and on wheels, ideal for low power, space-saving, Standard equipment:, • Station for body labeling with brake motor, • Control panel with potentiometers, • Equipped for cylindrical glasses, bottles and smooth cans, • Monoblock construction in stainless steel, • Working direction from left to right, • Possibility to put in line, • Fixed bottle collection table 40x50cm, • Power connection 400 volts 50 Hz., • CE protections and user manual, • additional equipment front and back labels from the same roll incl. •, Weight: 200.00 kg, power: 500-800 labels / h

never used, should be used for a cauldron to weigh the ingredients,, Platform dimensions: approx. 1,100x1,050 mm (WxD), Platform scale 0-300KG, Digit step up to 150KG = 50g, Digit step from 150 to 300kg = 100g, Weighing tolerance 0.1%, Incl. display electronics (control) + elevation, Extremely solid and stable construction for long-lasting precise weighing, made of rectangular tube 120 x 60 x 4 mm. Load cell: high-quality, calibratable IP 68 stainless steel strain gauge measuring cell of type 502E-3, OIML C3. Feet swinging and height-adjustable in stainless steel design., Approvals: EU calibration approval class III, CE compliant, due to increased resolution for weighing that is not subject to calibration.

Pos. 2 - supply to the cooling tunnel, single-strand, equipped with cornering plastic flat-top chain, 82.5 mm wide; Scaffolding in stainless, Execution; complete with supports, railing brackets and guides as well as drive motor block in, Hollow shaft version, make SEW, type DRN®, 400/230 V, 50 Hz, IP55, energy efficiency class IE3;, the conveyor system is equipped with a pneumatic stopper/slider combination., This is how the rows are formed and pushed off., Item 3 – cooling tunnel, The system is based on a mat chain conveyor that is guided through a cooling zone., Technical specifications, Conveyor capacity: 750 pieces/h, Inlet temperature approx.: 80°C, Outlet temperature approx.: 35 °C, Average room temperature approx.: 10 °C, Cooling time approx.: 55 min, cooling belt, Usable chain width: approx. 1,200 mm, Usable chain length: approx. 4,200 mm, Inlet/outlet height: approx. 1,000 ...

Trade fair and exhibition machine, available immediately, Dynamic checkweigher to avoid underfilling and overfilling, reducing rejects and costs., IFS - fair production control,, Gross weighing range: 3,750 g, Running direction: L->R, Conveyor belt height: 985 - 1,085 mm (adjustment range), Throughput: approx. 200 pcs/min. depending on weight and packaging dimensions, Degree of protection: IP 65, Power supply: 230V 50Hz, Total length: approx. 1,660 mm, Infeed belt 1: side press belt 600 x 50 mm with central adjustment, Infeed conveyor 2: 300 x 150 mm, Weighing belt: 250 x 150 mm, Outfeed conveyor: 600 x 250 mm, knife-edge, Execution: 3, Emergency stop (electrical/, Pneumatics): 1, Wire identification: yes, 3 Color Light: Yes, Ethernet interface: yes, Line synchronization: yes, Sorting: High Speed Rejection Curve (towards the operator), Sorting table on site, gross weighing range: 3,750g, ...

Automatic tray sealing machine, make Sealpack, type 5V/G, year 2015, Plant for sealing sealable trays with a on the tray, coordinated top film, Set up on an octagonal A-PET tray, for 125 and 175 g content (134 x 100 x 23/40mm) with an oval base and octagonal lid., without filler and without labeller, • Can be operated from both sides, standard operating side here from the right!, • including vacuum and gas equipment, • including vacuum sensor, real value display in mbar, • including MAPpIus gas supply system (first-class from 200 mbar vacuum, Gas values in the pack, product dependent), Machine made of corrosion-resistant materials such as VA and plastic,, very stable column construction, integrated VA control cabinet splash water, protected, swiveling control panel All-round operability, Menu navigation can be stored over several programs, All switching, driving and sealing funct ...

Filling line for glasses, Output: approx. 1,400 containers per hour, Formats for glasses with TO 82 and TO 100 available, consisting of:, Turning and blowing machine with infeed turntable, make Coudert Massiservices Seria, year 2013, [https://www.florin-machines/angebote/1786383-used-turning-and-blow-ou t-machine-with-infeed-rotary-table-part-of-a-filling-line-for-glasses] (https://www.florin-machines/angebote/1786383-gebraucht-wende-und-ausb lasmaschine-mit-einlaufdrehtisch-bestandteil-einer-abfuell-linie-fuer- glaeser), Fully automatic dosing machine, make Coudert Massiservices, Series EPR-1, year 2013, [https://www.florin-machines/angebote/1786387-used-2013-fully-automati c-dosing-machine-coudert-massiservices-epr-1-component-of-a-filling-li ne-for-glasses](https://www.florin-machines/angebote/1786387-gebraucht -2013-vollautomatische-dosiermaschine-coudert-massiservices-epr-1-best and ...

Piston filling machine, make Engler, type K 18, year 1998, below level filling,, rotary machine with 18 filling stations,, Filling range: 100 - 1,000 ml,, Running direction - from left to right, Cylinder diameter: approx. 75 mm, cylinder length: approx. 320 mm,, set up for glasses (500 ml) with a diameter of approx. 85 mm,, 2 other formats available with a diameter of approx. 68 and approx. 95 mm,, Filling nozzle: length approx. 234 mm, filling opening diameter: approx. 17 mm., Output: up to max. 200 glasses per minute,, in use for mayonnaise,, Siemens S 5 - 100 U - control., power: up to a maximum of 200 glasses per minute, Dimensions / weight: L x W x H: approx. 3,900 x 1,900 (with control panel approx. 2,100) × 2,800 mm, filling area: 100 - 1,000 ml,

Pneumatic can opener, make Edlund, type 625 M, powerful compressed air operated lid punch, (crown punch),, self-sufficient can opener for industrial use,, Output: approx. 2,000 cans per day, Characteristics:, completely made of stainless steel, for thorough cleaning can be hosed down from top to bottom, IP 65,, Suitable for opening cans of almost any size thanks to the height adjustability, Two - hand - operation, Compressed air requirement: 56.6 l / min at 6 bar,, format range:, minimum box height: 40 mm,, max. box height: 300 mm,, max. can diameter: 230 mm,, Info:, - Existing punch crown for can diameter 153 mm, - Additional punching crown optional, - With magnetic lid remover

Can seaming machine, semi-automatic, make Lanico, type V110 PH, year 2004 Ü, Can seaming machine, working semi-automatically,, Version: stainless steel,, was in use for beverage cans,, Processing range:, Diameter: from 42 to 163 mm, Height: from 26 to 300 mm, The machine was only driven in one shift and is in good technical condition, with pneumatic clamping and height adjustment., With storage - dispenser for the lid to be folded (56 mm), With 4 format sets for plastic cans with a metal closure with a diameter of 46, 50, 52 and 56 mm, power: up to 850 closures / hour