フルーツ野菜デリカテッセンインスタントミールマシン 中古 販売のため

Line for filling delicatessen products in plastic trays, consisting of:, Cup filling system, make Waldner, type 12.3, year 2011, 2 lanes (2 different formats) - but it can only be worked in one lane., Format set 1: round cup diameter 100mm (incl. rim) height 80mm and 60mm, Format set 2: Rectangular cup 185mm long 135mm wide (including rim) 35mm deep, The trays are sealed with film from the roll, Roll magazine approx. 500mm long, 400mm wide, Waldner space requirement: approx.: 2,100 m 2,100 mm, Outfeed belt of the Waldner: approx. 1,800 mm, Dosing of liquid and free-flowing components:, The system has two filling heads, which are filled via a pipeline directly from the cooking kettle., The pipeline can be completely pigged., The pigging line and Maso - Sinus pump, type SPS 3, are included in the scope of delivery., Feeding of the multihead weigher by means of two belts:, Tunnel elevator  ...

Herbortドラム切断機用ギア、タイプ120S、これはナイ� �シャフト用のハブを備えた最初のプラスチックギア ホイールです� ... 詳細情報

1) Manual sealing machine, make Miveg, type MT325, Incl. power cable yellow + variable roll holder, (fixing boxes left/right), for external GN dimensions 325 x 265 mm (1/2 GN),, existing format: 2 x 1/4 GN,, max. roll width 325 mm; diameter 200 mm max., Net weight: 30 kg, 2) Mobile table, Stainless steel, with parking brake, height adjustable: from 715 - 915 mm,, height grid 4 x 50 mm,, width: 445 mm, depth: 530 mm,, with a storage compartment of 280 – 480 mm., Table tray for MT325 table, Stainless steel, right or left, Width: 350mm Depth: 530mm Height: 240mm, Height offset at the table: 85 mm, attach on both sides, Devices were used for about 1.5 years., Existing format: 2 x 1/4GN,, Existing format: 2 x 1/4GN,

完全にステンレス製で、1日最大200缶の生産が可能で 、缶径:最大157mm、最大缶高さ:366mm、出力:約6-10缶/分� ��1回の手動動作で缶を開け、缶に鋭いエッジ(バリ)� �ありません� ... 詳細情報

Cup sealing machine with screw cap, make JBL, type Linocap, year of construction 2009, Output: 60 cups/min., A film is sealed onto the plastic cans, then checked for leaks and then screwed onto a lid., Four formats for the following cup diameters: 45, 57, 83, 91.5 mm, Lid formats: 48, 60, 79, 98 mm, The seal and correctness of the closure seat are then checked., The main drive and ancillary units were replaced in 2021., Ready to use (if the format is right), Dimensions:, Length without straps: 4,300 mm, with straps: 7,500 mm, Width: 1,000 mm, with lid feed 2,600 mm,, Height: 2,300mm, power: 60 cups/min.

ザワークラウト生産用のキャベツヘッドの切断に使� ��、切断ディスクの直径:800 mm、切断厚さ0.9 mmの4� ... 詳細情報

for removing the stone from fruits,, equipped with pitting insert for cherries - plate hole diameter 21-12,, The machine has 40 pitting plates, each with 108 holes., These holes are tapered and have an upper diameter of 21mm and a lower diameter of 12mm,, The machine is equipped with the following engines:, Main drive: 2.20 kW 1,500 rpm, Brush drive: 0.37 kW 3,000 rpm, Vibrator drive: 0.75 kW 1,500 rpm, The speed of the machine is infinitely adjustable via a hand wheel., Output: 12 - 80 / minute - depending on the type of fruit and the ripeness of the fruit, power: 12 - 80 strokes / min (stepless), Dimensions / weight: 1.6 tons

チェリーストーナー、バスカヤ、モデルBM-CC-IA、2020� ��、機械はチェリーの自然な形状を破壊することな� �石を取り除きます。 プランジャーストーナー、FERRUMストーナーと互換性� ��り、出力:製品の品質と校正に応じて約800〜1,400 kg / h、バージョン:ステンレス鋼、、寸法:長さx幅x高さ:� ��3,500 x 1,300 x 2,000 mm、重量: 1,250のkg、電気。接続負荷:4kW�

Closing machine, fully automatic, year 2018, ALWID Variant-SK/DST, The system consists of:, - a fully automatic sealing machine, type: ALWID-VARIANT-SK / DST,, with a rotating star and set up for a screwing head, for one can size and one screw cap size, with fully automatic, Cap sorting and cap feeding, with lining of the, Cap sorting / parts conveyor, - With anti-twist device, set up for a round can size, - as a solo machine with 1.0 mtr. Infeed conveyor belt and 1.0 mtr., Outfeed conveyor belt, with infinitely variable belt drive, with, Bottle conveyor made of belt system, with complete electric, Control, machine base in stainless steel design, control cabinet on the, outlet side, - with a 4-sided protective cover with panes made of MAKROLON with, Security doors in CE compliant design, with top cover made of, MACROLON, General Information:, Working direction: right - left, Working heig ...

Horizontal tubular bag machine, make Jaguar Record in use for bars, This horizontal form, fill and seal machine can pack one or more products in a film bag., The machine runs at a maximum cycle rate of approx. 36 bags/min., The following formats (bag widths) are already available:, 35 mm width (single bar) & 145 mm width (several bars in one film)., The length of the bag can be adjusted variably., The heat-sealing film is sealed using heating jaws., The MHD print can be set manually and moved across the entire width of the film., Lt. current owner in working condition.

自動回転式機械、マスタードに使用中、直径70mm、高 さ80mmの丸いプラスチックカップに設置、長方形カッ プの追加フォーマット:55 x 43 x 17.7 mm、充填量:5 - 200 ml、出力:毎時最大1,500カップ、、ロータリーで構成� �れています:、カップマガジン、カップの自動アン� �タッキング、、 充填ステーション、対応する蓋マガジンと蓋の自動� ��み下ろしを備えた蓋ステーション、、充填および� �封された容器を統合された収集テーブルに出力しま �

Pneumatic can opener, make Edlund, type 625 M, powerful compressed air operated lid punch, (crown punch),, self-sufficient can opener for industrial use,, Output: approx. 2,000 cans per day, Characteristics:, completely made of stainless steel, for thorough cleaning can be hosed down from top to bottom, IP 65,, Suitable for opening cans of almost any size thanks to the height adjustability, Two - hand - operation, Compressed air requirement: 56.6 l / min at 6 bar,, format range:, minimum box height: 40 mm,, max. box height: 300 mm,, max. can diameter: 230 mm,, Info:, - Existing punching crown for can diameter 153 mm, - Additional punching crown optional, - With magnetic lid remover

Used filling and packaging line for delicatessen products, In use for mayonnaise, 500 g - jars,, Output: up to a maximum of 170 glasses/minute, consisting of:, OSMEKA - empty glass - depalletizing, pit design, year 2004, Output: 2 layers / minute,, buffer table with separation,, Turning and blowing machine, make Engler, year 2001, Output: max. 170 glasses/min,, Piston filling machine, make Engler, year 1998, Output: up to max. 200 glasses/min,, SAFELINE (METTLER TOLEDO99 metal detector, Drying tunnel, make ACI, Dri-Line Series, CLEVER sleever + shrink tunnel, LANGGUTH labeling machine, type E212/R-235, year 2000, Output: up to max. 170 glasses/min,, MR labeling technology, seal labelling, year 1998, Output: up to max. 200 glasses/min,, MEYPACK tray packer, year 1996, with foil wrapping machine + shrink tunnel, Output: 14,400 glasses / h - 20 cycles per minute

Sorting, cleaning, blanching and peeling plant for carrots and beetroot, make Komen & Kuin, Blancher capacity:, 10 tons of carrots per hour up to 80°C,, 5 tons of beetroot per hour up to 80°C,, max. throughput time: 35 minutes,, Dimensions, approx.:, Height: 3.50 m, Width: 3.20 m, Length: 8.20m, matching:, 1) Sorting machines for beetroot, celery, etc. …., Dimensions, approx.:, Height: 2.60 m, Width: 2.40 m, Length: 6.90m, Fraction 1 to 3 cm, Fraction 2 to 7.5 cm, Fraction 3 to 10 cm, Fraction 4 Overflow, 2) washing machines, Washing machine 1: drum diameter approx. 80 cm,, Distance between the bars about 5 mm,, Length drum approx. 200 cm, Washing machine 2: drum diameter approx. 90 cm,, Distance between the bars about 10 mm, Length drum approx. 300 cm, 3) Stoner, 4) heat exchanger, 5) various ascending belts, 6) Read tape, 7) different pipes, 8) Different pumps

Linear runner for applying sign or wrap-around labels (wet glue) to cylindrical containers., Perfomance:, approx. 25-100 labelings/min freely adjustable via frequency converter, Design type:, Left-hand machine (The overlapping direction of the wrap-around labels depends on this), gluing:, 210 mm brass glue roller with quick change device with one pitch, from 19 to 3 mm (horizontal stripe gluing over the entire length of the label), label magazine:, Up to 3,500 labels with a length of 80-380mm, Working height of the conveyor belt:, 1,000mm, adjustable +-50mm, Carrier:, 80.5mm chain, length approx. 3m/ with snail, glue supply:, pleumatic glue pump with heating, Paintwork:, light gray Ral 7042, unless stainless steel, Electrical equipment according to VDE regulation: 400 volts, 3 phases, 50 Hz, control voltage 24, Volts / PLC Siemens, Degree of protection: IP-54, Connection value: approx. 0 ...

バッファテーブル、クイエル製、タイプPT 15、、 寸法バッファテーブル:、 長さ x 幅 x 高さ:約 1,800 x 1,220 (ガイド付き:1,350 mm) x 900 mm、 コンベアベルト寸法、2レーン:約 3,350 mm� ... 詳細情報

Langguth labeling machine rotary, Type: E50/-2/4, Year of construction: 1999, Format parts for containers with body diameters of 122mm, 75mm and 57mm as well as various spare parts and glue pumps included., 2 stations - Machine applies front and back label with wet glue over 4 plates., Output max. approx. 3,300 containers/hour

The multi-purpose food processor SOLIA M30, consisting of a separate, Drive and various attachments, is suitable for rational connection and, Processing of food., Ideal for approx. 1000 catering units, The SOLIA M30 was specifically designed for such users in the catering industry, Hotel industry designed to prepare up to 1000 meals a day., - 3 x Solia M 30 basic device, 1 x Solia M20 basic device, - each with single-magnet hoods/attachments, - without frame, without cutting gate, whisk, knife, - 1 piece of attachment: meat grinder, - The engine blocks weigh approx. 30-40 kg (23x55x34 cm), - Various attachments

Output: up to max. 330 containers / minute (plastic bottles with delicatessen sauces 200 g), single-beam X-ray inspection device (side view), Tube replacement in Sept 2022 - 1 additional new X-ray tube included, max. bandwidth 156 mm, Scanning height: 425 mm, Power max. 600 W, Voltage: continuously adjustable up to 60 kV,, Current: up to 10 mA, continuously adjustable, Designed as a curtain-free X-ray scanner, Scanner tape: 2600 x 190.5 Intralox, Total length of the system: approx. 2706, Working height: 950 - 1050 mm, Working direction: left - right, Elimination: short-stroke pusher, Belt conveyor belt with IMOT drive unit (servo motor) for, Overtracking., Tool-free quick-change device for replacing the, belt., Continuous adjustment of the transport speed via the, Control of the machine. Small transfer radii for optimal, Product transfer situation on the incoming and outgoing conveyor.,  ...

Filling system for sprouted vegetables, consisting of:, - Plate conveyor belt for containers, runs through chamber filler, - Product feed hopper for feed screw, Dimensions feed hopper: L x W x H = 850 x 800 x 400 mm, - Feed screw for product, Distance between the screw flights: approx. 160 mm,, Screw diameter: approx. 320 mm, length: approx. 8000 mm, - Belt conveyor belt make Niko type 02703022, machine number 403980,, blue smooth belt: approx. 2100 mm, usable width: approx. 340 mm, Belt conveyor belt for product transfer from the feed screw to the multihead weigher, - Multihead weigher with 14 heads, corrugated stainless steel sheet, make Klinger, type CW14, opening of the weighing container approx. 140 x 130 mm, - Stainless steel platform for multi-head weigher, Dimensions: approx. 3500 x 3500 mm, plateau height approx. 3000 mm, - Chamber filler TK 12, type 381, machine number 40395/01 ...