熱成形機 中古 販売のため

Automatic Packaging and ShrinkIng Line Reepack This line is a fully automatic packaging and shrinking line. For a quick overview have a look at the video below. This line consist of the following equipment: Reepack BT 1000 DL Vacuum Chamber belt machine; Reepack ST 80 Shrink Tunnel; Reepack DT 80 Drying Tunnel: 1. REEPACK BT 1000 DL VACUUM CHAMBER BELT MACHINE Vacuum Chamber belt machine suitable for packaging food-stuff in large batches into their bag. An automatic loading conveyor belt permits to move the products in bag and entering in the vacuum chamber for processing. A wide range of bags quality and thikness can be used and in case of shrinkable bags the machine can be fixed in line with an automatic shrinking tunnel and finally an automatic drying tunnel. Technical Data: Vacuum chamber dimension: 1000 x 800 x H250 mm Chamber useful ...

HEMINGSTONE JP-40SE-SV Year 2002 Side sealing machine Bag size - Width 900 mm , Length 200-900 mm Available bottom sealing bar ... 詳細情報

Thermoformer Skin ULMA TFS 300 which has normally been modified to TFS 407 Year 2012 Width 422mm Feed pitch 250mm Dimensions: (L) 5.7m x (W) 1m x (H) 2m Two tools Selvedge rewinders Integrated labelling module ... 詳細情報

It is after renovation, and after replacing the control with relays The machine is in perfect condition It has gassing - protective atmosphere - MAP 320mm film Mold 300mm x 300mm Mold 2 x 150mm x 300mm Supplied with a vacuum pump and 2 km of foil. ... 詳細情報

Features of the machine: 1. 4 compartment sealing for better stability of the bags 2. date stamp 3. valve applicator 4. 2 different moulding tools (e.g. for 250g and 1000g content) 5. conveyor belt loading 6. unloading conveyor belt 7. 4 head linear weigher 8. electronics from Schneider The machine is assembled and can be tested and demonstrated. Specifications: Voltage: 220V / 3Ph (380V) Film type: OPP/CPP OPP/CE MST/PE PET/PE Film thickness: 0.04 - 0.08 mm Film width: 140 - 520 mm Diameter Film roll: 320 mm outer and 75 mm inner Max. Bag Size: 80-160 mm (Front), 40-80 mm (Side), 80-400 mm (Length) Speed: 5-40 Bpm Weight: 750 kg Power: 7KW Horiz. Jaw heater: 4400W 220V Vert. jaw heater: 4600W 220V Air pressure: 0,65MPa Consumption: 0,6m³ / min Dimension: L 1400 x W1800 x H2020 Dismantling and transport must be organised by the buyer. It is 3 years old, h ...

A vacuum former from the US company The Channel Letter Bender. The machine was bought in 2017 and has operated over the years around 30 hours, so it is practically brand new and is well maintained. All the technical specifications are in the PDF. Shipping dimensions 1650 mm x 2400 mm x 2400 mm ( L x W x H ) ( 65 inch x 95 inch x 95 inch ) weight 700 kg ( 1543 lbs ) Operating area 3000 mm x 3500 mm ( 118 inch x 137 inch )

Betapak Z 105 Automatic Thermoform Machine Machine is in very good condition Capacity : 6-8 cycles/min Based Film : PA+PE / PVC+PE / PET+PE Lid Film : PA+PE Max Depth: 90 mm ... 詳細情報

Format set for hardfoil trays 195 x 250 mm Foil width 422 mm For skinpack ... 詳細情報

Inert atmosphere packing machine with thermoforming, dimensions of 500x320mm; conveyor belt width 480mm; stainless steel construction; never used; ; The machine was never used ... 詳細情報

ULMA thermoforming machine model SUPRA from 2008 Width 422mm Double feed 250mm and 150mm Dimensions: (L) 6.3m x (W) 1.4m x (H) 2m 1 tool on the 155 pitch in round shape (bowl) Edge winders Motorised exit conveyor Integrated label dispenser Price to be discussed ... 詳細情報

Packaging machine (2008),but its in a very good condition, its like new because of the low useage. Our company had used it for packaging disposable medical devices. Every year we have done the necessary maintenance work on it. This machine is suitable for packaging in soft and hard folien as well.

Used Zip Pak RD Bag Zipper Applicator and Sealer VFFS with: Zipper Applicating System for applying a zipper material to flim prior to filling product in a Vertical Form Fill and Seal Bagger: Can be integrated with Horizontal Bagger for a press to close zipper Press to close technology Transverse zipper direction Small machine footprint Stainless steel frame Personnel guarding Film unwinder Adjustable dancer bar weight Film rollers: 35 wide 1750 RPM, 1/2 HP Zip Pak motors (4) Fully adjustable for vaious product sizes Last ran printed film 14 wide Two inline seal jaws 6 long Casters for mobility Electrics: 208/240 volts 3 phase 60 hertz 25 amps

Use PackLine PD4 Premade Horizontal Form Fill Seal with: Operate with fillers for liquid, dry or powdered paste and hot products. Output: 35-40 Pouches per minute Compressed air: 500 liters per minute (2) Seal bar width: 10 inches Bag size: 8.1 inches x 10.24 inches Voltage 208 Electrical Phase 3Ph Hertz 60Hz

OMG OMF/PVE 50-PN-M Technical specifications: Manufactured: 2005 Operating hours: 5.745.000 cycles Material: PS, PVC, PET, PP, EPS Stations: Forming, Cutting and Stacking Forming Area: 770 x 650 mm Maximum Film width: 820 mm Maximum forming depth: 120 mm Maximum dry cycle speed: 30 cycles/min Max.Closing Force of the Cutting Press: 60 ton Maximum Pressure: 6 bar Vacuum pump motor power: 2,2 kW Total heating power of the upper oven: 36 kW Total heating power of the lower oven: 33 kW Vacuum pump capacity: 100 m^3/h Dimensions (L x W x H): 10,0 x 2,4 x 2,7 m Total Weight: 8000 kg The price includes dismantling and loading costs

D&b Cleaning System forming, filling and filling line Excellent condition, used very little. ... 詳細情報

B&D Clean system forming filling and filling line Excellent condition, used very little. ... 詳細情報

Technical Sheet of Thermoforming Machine Model: SF-VF-22-13-06p Year 2007 Brand: QS Group Status: For sale Delivery time: Immediately Description This single station thermoforming machine is designed and built to meet the requirements of various production sectors, for small and medium productions of thermoplastic materials with thicknesses ranging from 1 mm to 10 mm and maximum dimension of plates up to 2310 x 1360 mm. This is a machine in very good working order. • Maximum dimension of the plates: 2310 x 1360 mm • Thickness of the plates: up to 10 mm • Loading the plate and unloading the product: Manual Mold holder table: • Maximum stroke: 90 mm • Maximum mold height: 600 mm • Mold base height: 195 mm • Closing force: 27 kN • Contains: Stroke control with linear transducer, vacuum line for forming the part, water line for thermoregulation of the mo ...

Individually produced vacuum machines (2 pcs.) for the production of roof boxes, but also suitable for the production of other products within the dimensions below. Its maintenance is simple and its cost is very low. In addition to the two vacuum machines, the price also includes the tools required for the production of the roof box (4 types), TÜV Nord certificate, and training in the production process if necessary. Small vacuum machine: 2 pcs. sheet trays 2260 x 1060 mm (for the bottom and roof). The temperature can be adjusted per cycle. The horizontal movement of the furnace is solved pneumatically. The vertical movement of the table works pneumatically and its height is 380 mm. The vacuum capacity of the vacuum machine is 130 m3/hour. It is suitable for the production of 5 pcs of roof boxes per hour (bottom + roof). Big vacuum machine: 2 pcs. sheet trays 2380 x 1180 ...

Material : PP, PET, HIPS // Forming Area (Vxh): 800x550 ... 詳細情報

Material : PS – PS/PE – PE/PS/PE– PVC – PET – ABS // Forming Area (Vxh): 700x500 ... 詳細情報