プレス 中古 販売のため

press capacity:950 kNcontrol:Siemens S7 Required air-pressure:6 barloading area:1200 x 600 mmPressure power:1000 kNtotal power requirement:18 kWweight of the machine ca.:6200 kgdimensions of the machine ca.:2600 x 1300 x 3100 mm ... 詳細情報

Description: BIESSE COMIL CF 2000 Clamping Press Machine Working length: 2500mm Working width: 600mm Working hight: 1200mm Max throughfeed width: 720mm Feeding speed: 7,5-37,5m/min Adjustable time for the horizontal pistons: 6,85m/min Working air pressure: 6-8 bar Consumption per working cykle: 115dm3 Power 400 volt, 50 Hz, 3 phaseserial number: 55,969, Approx. Onsite Dimension. (l x w x h): 7,050 x 720 x 2,600 mm, weight approx.: 2,900 kg

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... 詳細情報

Description: The EB-350-50 waste briquetting extruder is designed to produce briquettes with an octahedral cross-section size of 53 x 53 mm with a central hole. , The raw materials are sawdust, as well as buckwheat hulls, sunflower, rice. Parameter unit rev. value (extruder performance, up to depends on the type of raw material and its preparation) kg h 350 bulk density of the original raw material not less than 120 kg/m3 feed humidity 4-8 % feed fraction 2-8 mm briquette density not less than 1000 Kg/m3 process temperature • K ( C) 423-623 raw materials in the pressing area (150-350) installed power no more, inclusive. kW 46.4 kW electric motor of the main engine kW 37 electric motor feeder 2.2 kW electric heaters 7.2 kW electricity consumption for one hour of extruder, no more than 38 kWh specific consumption of 0.11 kWh electricity no more than global dimensions, no more than:  ...

Description: Joos electro-hydraulic veneer press with gold anodized plates Brand: Joos Type: EU80 Year of construction: 2010 M-No.: 1948289 Net working dimensions: 3,100 x 1,300 x 350 mm Press type: fine press - heated Adjustment: Electric-hydraulic, with incline press protection Control: Electric-relay controlled Automatic steering via proximity switches Electronic pressure monitoring Stepless pressure setting with constant pressure monitoring Timer: Automatic press opening end of press cycle Technical data: Cylinders: 6 cylinders of ø80 mm Pressure total: 70 tons/700 kN Pressure: Max.2.0 daN (kg)/cm2, distributed over 6 cylinders total 700 kN Weight: approx. 4,000 kg Control: manual , Pressure: analog Time: analog Indicator lights Emergency stop circuit: Safety cord over entire operator side Approx. Onsite Dimension. (l x w x h): 3,300 x 1,350 x 2,400 mm, weight approx.: 4,000 kg

Description: ORMA SPAZZ SUP INF Hydraulic Press with feeder Cleaning Brushing Top and Bottom working 1300 mm dimension (l x w x h) approx. (3 packs) 4340x1990x3400 mm 1050 x 560 x 1550 mm 3750 x 1300 x 1750 mmApprox. Onsite Dimension. (l x w x h): 4,340 x 1,990 x 3,400 mm, weight approx.: 12,000 kg ... 詳細情報

Description: Veneer press ITALPRESS MEC4S (273 x 127 x 179 cm) (opening dimension 300 mm), Press area 1110 x 2200mm stored for approx. 2 years! WITHOUT checking for completeness and functionApprox. Onsite Dimension. (l x w x h): 2,730 x 1,270 x 1,790 mm, weight approx.: 2,500 kg ... 詳細情報

Description: Hydraulic Frame PressApprox. Onsite Dimension. (l x w x h): 4,270 x 1,700 x 2,900 mm, weight approx.: 2,000 kg ... 詳細情報

Description: Productivity 400/500 kg/h Pump motor 18.5 kW Briquette diameter 70 mm Operating pressure 200 bar Hopper capacity of 9.4 m3 (diameter 2000 mm - height 3000 mm) Refrigeratorserial number: 0956, briquet diameter: 70 mm, Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 2,000 kg

Description: OCMAC Carcase PressApprox. Onsite Dimension. (l x w x h): 5,900 x 1,010 x 2,620 mm, weight approx.: 1,000 kg ... 詳細情報

Description: Cabinet dimensions: Cabinet length- 300 - 2600 mm Cabinet height- 300 - 1350 mm Carcase width- 220 - 700 mm Pressing force: Horizontal- 1800 kg Vertical- 2300 kg Pressing elements: Vertical 7 pieces 150 x 50 mm Horizontal 6 pieces 150 x 50 mm Connection: 400 V 3 KWApprox. Onsite Dimension. (l x w x h): 3,800 x 1,000 x 2,400 mm, weight approx.: 2,200 kg

Description: Loader belt dimensions 1920 X 3200 mm , Integral loader dimensions: 2200 x 4400 x 1000 mm  , Unloading roller conveyor dimensions:  ,1900x 2500 x 1000 mm  , Pressing table dimensions: 1900 x 3500 mm  , Equipped with No. 6 pressing plungers DIAM: 150 mm approx  ,Approx. Onsite Dimension. (l x w x h): 9,500 x 3,000 x 2,100 mm, weight approx.: 6,000 kg

Description: OTT veneer stack press with gold anodized panels Press area 2,500 mm x 1,300 mmApprox. Onsite Dimension. (l x w x h): 2.800 x 1.500 x 2.000 mm, weight approx.: 3,500 kg ... 詳細情報

Description: Briquetting Machine Serial number 164 Power 7.5 kW Pump capacity 34 cm3 Tank Ø 1000 x 900 mm CE availableserial number: 164, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,900 x 1,600 mm, weight approx.: 800 kg ... 詳細情報

Frame press, gluing press -operated: hydraulic -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100 / H3700 mm -Transport dimensions: 4200/1200 / H2300 mm -Weight: approx. 3500 kg ... 詳細情報

Plate press, gluing press, veneer press, splicing press, heating press, molding press -Handover: in the current condition as seen -Heating plates: the middle heating plate is defective -Manufacturer: Paul Ott, veneer press heatable type JU 80 -Drive: hydraulic -Heating capacity: 24 kW -Working area: 2550 x 1350 mm - Opening height: 400 mm -Dimensions: 3325 /1540/H1850 mm

Short cycle press, short cycle press system, panel press, gluing press, veneer press, adhesive press, heating press, molding press, -Pressing area: 3810 x 1600 mm -Manufacturer: Wemhöner, heatable veneer press type VOF2-295/2 -Control: Siemens S5 -Drive: hydraulic -Number of press cylinders: 8 pieces -Pressure pressure: 295 t -Pressure: max. 60 N/cm² -Plate heating: gas burner heat exchanger via thermal oil (max. 130° degrees) -Infeed conveyor belt: 1600 x 5000 mm -Outlet roller conveyor: 1600 x 5000 mm

圧力:40 tスタンド幅:700 mmストローク:150 mm テーブル表面:700x650 mm ラム面積:670x650 mmテーブル内の下痢口開口部:120 mm テーブル高さ:850 mm 機械重量約:4 t所要スペース約:WxDxH 2000x18000x2700 mm変位と圧力シャットダウン4列ガイド付き機械式固� ��停止調整手動挿入作業に承認済みこの広告のデー� �は、LogoTech oHGのマシン管理であるModulMWSで作成されました�

圧力:100 t スタンド幅:625 mm ストローク:150 mm テーブル表面:580x450 mm ラム面積:580x340 mm テーブル内の下痢口開口部:150 mm テーブル高さ:850 mm プランジャーのピン穴:45 mm 横方向スタンド通路:200x200 mm 機械重量 約:約:約6.0 t所要スペース 約:WxDxH 約:WxDxH 約1300x1300x2750 mm固定停止調整圧力と変位接続両手操作高速操作テ� �ブル内のロールブロックストリップ手動挿入のため に承認されたこの広告のデータは、ModulMWS - LogoTech oHGの機械管理 - で作成されました�

圧力:250 t コラム間の距離:1100 mm ストローク:400 mm デイライト:600 mm テーブル表面積:1000x800 mm ラム表面:1000x800 mm テーブルの高さ:950 mm総電力要件:65 kW機械の重量:25 t機械の寸法:BxTxH 0000x0000x3900mm m ... 詳細情報