사용 SMI 판매를 위해

SMI SK300F 수축 포장기 제조 년도 2006 수용량 30 팩/분 머신 드라이브: SMI 광섬유 및 코스모스 바리에이터 + HMI posic. 인피드 & 아웃피드 컨베이어 장착 아주 좋은 상태 기계 개정 및 원래 SMI 새 부품에 대한 모든 예비 부품과 함께 제공 현장에서 해체 예정 즉시 사용 가능

여 71 | 수축 래퍼 SMI 연도 : 2006 최대 속도: 30PZ/분 모델: SK 300F 유형: 더블 레인 기능: 필름만 판: 더블 레인 0,25X3 E 3X4의 LT 팩 더블 레인 0,50X3의 2 LT 팩 1,0 LT 및 1,5 LT 팩(단일 레인 3X2) 많은 예비 부품 사용 가능 안전 보호

여 72 | 수축 래퍼 SMI 연도 : 2009 속도: 45PPM 모델: SK 450 F 영화만 사용 가능한 설명서 : 예 안전 보호

송풍기 SMI SR 14 • 년도 : 2004 • 속도: 20.000 bph • 14 캐비트. • 병 형식: • 0.5Lt - 1.5Lt - 2Lt • 스탬프 포함. • 안전 보호.

SMI 모델 LSK 42 F의 자동 복열 포장기를 사용했습니다. 분당 42 개의 가방을 출력합니다. 포장업자에는 자동으로 제어되는 공기 송풍 및 배출 기능이 있는 전기 가열 터널이 있습니다. 조절 가능한 플랩이 있어 뜨거운 공기를 팩에 정확하게 전달할 수 있습니다. 터치스크린 조작 패널과 에어컨이 설치된 제어 캐비닛이 있습니다 형식: 0.5l; 1.5리터; 2리터.

팩 2 팩, 4 팩, 6 팩

Fill만 있는 Shrinkwrapper 상표: SMI 모델: LSK 30 P 년도 : 2003 속도: 30 팩/분

중고 멀티 패커 중 1 개, SMI 만들기, MP 300 RD 유형, 새 2002. 최대 300 사이클 / 분의 용량. PET 병에 사용됩니다. 직경 66-73 mm x 높이 179-230 mm, 슬리브 당 2x2 = 4 및 2x3 = 6 병. 향후 형식 (의뢰되지 않음) 2x4 = 8 및 1x3 = 3. 로토 디바이더 포함.

힘: 대략 60 팩/분. 현재 다음 형식을 처리하도록 설정되어 있습니다. 0,33l - 0,5l 캔 3 x 4 = 패드 없이 호일로 축소된 캔 12개(인쇄) 6 x 4 = 패드 없이 호일로 축소된 24캔(인쇄)

필름 포장 기계 전원 : 약. 120 팩 / 분. (이중 추적) 현재 다음 형식을 처리하도록 설정되어 있습니다. 0,33l – 0,5l 캔 3 x 4 = 패드에 12 캔, 호일로 축소 (인쇄) 6 x 4 = 패드에 24 캔, 호일로 축소 (인쇄)

수축 포장업자 제조: SMI 유형: AF 432 BF 용량 : 최대 32 팩 / 분 욤: 1997 조정: PET 병 포장 패드와 수축 포일에 다음으로 완료: •급식 컨베이어에서 •배출 컨베이어

개요 골판지 포장기는 스페인에 있으며 문제없이 배송 될 수 있도록 완전히 점검되었습니다. 이 기계는 병, 캔 등을 수집합니다. 골판지 시트에 넣은 다음 압축하여 닫힌 상자를 만듭니다. 최대 속도는 형식에 따라 분당 45상자입니다. 프로그래밍된 기계는 다양한 형식을 생성할 수 있습니다.

개요 이 랩어라운드 판지 포장기는 이탈리아 제조업체 SMI에서 2008년에 제작했습니다. 기계는 여전히 설치되어 있으며 직접 볼 수 있습니다. 기술. 세부 정보 용량: 분당 최대 45팩 최근 포장: 3x4 판지, 0,75L 유리병 다른 형식 가능 근무 시간: 1,752 POSYC 3000 터치 패�

Overview The shrink wrapper was built in 2006 by Italian manufacturer SMI. The machine is in a very good condition, already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 30 packs per minute Specs: Double lane for 0.25 & 0.50L Single lane for 1.0 & 1.5L Packing:                                  film only 0.25L packs in 3x3 & 3x4 double lane 0.50L packs in 3x2 double lane 1.0L & 1.5L in 3x2 single lane in neutral or printed oriented film Machine drive: SMI optical fibre & Cosmos variator + HMI posic. Marts 3000 and Cosmos 2000 drive Machine equipped with infeed & outfeed conveyors Supplied with all spare parts for machine revision & original SMI new parts

개요 수축 포장기는 이탈리아 제조업체 SMI에서 2006년에 제작했습니다. 기계는 매우 양호한 상태이며 방문 할 수 있습니다. 기술. 세부 정보 용량: 45팩/분, 단일 레인 마지막 실행: PET 병 – 필름만 가능 가능한 포장: 필름만 인쇄 필름: �

개요 이 블로몰더는 2005년 이탈리아 제조업체 SMI에서 제조했습니다. 테크엔. 데이터 14 캐비티 형식: 0,5 – 2,0 l, 원형, 제곱 납품 범위 블로우 성형기 SMI SR14 냉각기 ASKI 연도 2005 프리폼 덤프 트럭 프리폼 피�

Used Blow Molding Machine SMI SR10HP year 2015 Firstly the SMI SR10HP produced in 2015 emerges as an advanced solution for PET container production This analysis aims to detail its technical specifications and operational features It significantly highlights the machine s efficiency and productive capacity in industrial environments Productive Capacity and Versatility of the Blow Molding Machine SR10HP Importantly the machine achieves a remarkable speed of 17 000 BPH showcasing its high capacity It adeptly processes a variety of container sizes including 0 20 L 0 33 L and 0 6 L thereby offering considerable flexibility in production lines Configuration and Components Moreover it boasts ten cavities for simultaneous preform processing which optimizes production time Integrated systems such as a loader tipper and unscrambler automate preform handling Consequently these systems minimize man ...

Used shrink wrapper SMI SK 450F up to 28000 bph Technical Introduction The bottling sector is requiering precise machinery In fact the Used shrink wrapper SMI SK 450F up to 28000 BPH presents itself indeed as a leading tool in this category Made in 2009 The SMI SK 450F represents undoubtedly a synthesis of innovation efficiency and versatility Technical features The Used shrinkwrapper SMI SK 450F up to 28000 BPH is designed specifically for shrinkwrapping Without a doubt it exemplifies a balance between rugged design and advanced functionality Equipped with durable components it guarantees a long operating life minimizing the need for frequent maintenance interventions Capacities and Formats of SMI SK 450F With an impressive operating capacity of 28000 BPH the Used shrink wrapper SMI SK 450F up to 28000 BPH is ideal for large scale operations But it s not just the ability that sets it ap ...

Used Blow Molding Machine SMI SR12 2007 This used blow molding machine manufactured by SMI in 2007 is a reliable and efficient machine designed for PET containers The model is SR12 and it is capable of producing containers with a format of 1 5 L With 12 cavities this machine has a high production capacity and can produce large quantities of containers in a relatively short amount of time One of the advantages of this machine is its preform loader preforms tipper and preforms unscrambler which help to streamline the production process and make it more efficient The preform loader automatically loads the preforms into the machine the preforms tipper tips the preforms into the mold and the preforms unscrambler helps to orient the preforms in the correct position for molding The preform neck type for this machine is PCO1810 which is a widely used neck finish for PET containers This blow mold ...

SMi SR 10 Used Blow Molding Machine 2010 The SMI SR 10 Used Blow Molding Machine 2010 is a high quality machine manufactured by SMI This machine is designed to create containers made from PET material and comes in three different formats 0 50 L 1 0 L and 1 5 L The model number of this machine is SR 10 and it was produced in the year 2010 The SMI SR 10 has a speed of 15000 bottles per hour making it an ideal choice for businesses looking for a fast and efficient production process This machine comes equipped with ten cavities allowing for the creation of multiple containers simultaneously It also includes a preform loader preforms tipper and performs unscrambler which work together to ensure that the preforms are loaded and positioned correctly for the blow moulding process Is there annexe equipment The SMI SR 10 Used Blow Molding Machine 2010 does not come equipped with a compressor or c ...

Used Shrink Wrapper SMI SK 450T 45 ppm tray If you re in the market for a top tier shrink wrapping solution look no further than the SMI SK 450T This machine crafted by the renowned brand SMI in 2001 represents a pinnacle of engineering and design catering to your packaging needs with precision and reliability Machine Specifications Machine Type Shrinkwrapper Brand SMI Model SK 450T Year of Construction 2001 Max Speed 45 packs per minute ppm Container Material Glass Max Container Height 340 mm Package Type Film Tray Number of Slopes 6 Max Reel Size 500 mm Number of Reels 2 Operator Side Right Condition As It Is Warranty 6 Months Enhanced Efficiency and Versatility The SMI SK 450T is engineered to elevate your packaging operations with its remarkable speed of up to 45 packs per minute Its compatibility with glass containers and film trays ensures a sleek and professional presentation for  ...

Used Shrink Wrapper SMI LSK 30P year 2004 Welcome to the world of high quality packaging solutions with the SMI Shrinkwrapper LSK 30P from the year 2004 This advanced packaging marvel proudly presented by the renowned brand SMI is your gateway to efficient and impeccable packaging Key Features Designed to meet your packaging needs with precision the SMI LSK 30P boasts an impressive array of features Model and Performance This shrinkwrapper is the LSK 30P model offering a remarkable maximum speed of 30 packages per minute ppm Its consistent and reliable performance ensures your production line runs smoothly Container Compatibility Perfect for 750 ml packages the machine accommodates PET materials ensuring both durability and visual appeal It supports a maximum container height of 350 mm allowing you to package various products effortlessly Package Type The machine excels in using a film l ...

Used Blow Molding Machine SMI EBS 10 year 2019 Introduction to the Blow Molding machine SMI EBS 10 Initially the industrial bottling sector demands unparalleled precision and operational efficiency Consequently the Used SMI EBS 10 Blow Molding Machine from 2019 perfectly embodies these crucial characteristics This machine ingeniously integrating advanced engineering is specifically designed for the manufacturing of PET containers showcasing its pivotal role in the industry Technological Capacity Produced by SMI the introduction of the EBS 10 ERGON model in 2019 stands as a testament to significant technological advancement Boasting an impressive production capacity of 17 000 BPH bottles per hour this capacity is essential for meeting high volume production demands Additionally it supports various container formats including 0 20 L 0 33 L and 0 6 L thereby significantly enhancing its util ...