사용 RUCHSER 판매를 위해

조립 테이블은 풋 레버를 통해 기울일 수 있습니다. 치수 기본 치수: 1500 x 1400mm, 3200mm 회전 중량: 약 100kg

하드웨어 드릴링 머신 루처 RU-EBL2, 5-S 마쉬. 제품 번호 00664-2-96 무게 약 700 kg 건설 연도 1996 패 x 폭 x 높이 : 350 x 80 x 130 cm 기계는 양호한 상태이며 작동 준비가되었습니다. 변경, 오류 및 사전 판매에 따라 달라질 수 있습니다! MATEC CH-4900 Langenthal/DE-79618 Rheinfelden의 서비스/예비 부품 MATEC system+technik GmbH 기계 공학 아이젠반스트라세 25 CH-4900 랑겐탈/스위스 전화 0041 62 966 18 32 팩스: 0041 62 966 21 12

조립 테이블 Ruchser RU-BM-2500-PS-SONDER 건축 년도: 1997 픽업 준비, 가격 EXW 테이블의 상태가 양호하여 사용할 준비가 되어 있습니다. 변경, 오류, 사전 판매에 따라 달라질 수 있습니다! 서비스/예비 부품 by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC 시스템+technik GmbH 기계 공학 아이젠반슈트라세 25 CH-4900 랑겐탈/스위스 전화: 0041 62 966 18 32 팩스: 0041 62 966 21 12

창 범용 회전 틸트 테이블 RUCHSER는 날개와 프레임 모티지를위한 보편적입니다. 공압 틸팅 장치가있는 터닝 틸팅 테이블, 4 개의 지원 스파가있는 작업 플랫폼. 높이 900 mm - 1050 mm 조절 가능. 리프팅 장치 400 mm 보관 상자 6개 운전 장비 보증 또는 보증없이 사용 된 기계. 함부르크 위치에서 배달이 언로드되었습니다.

Window processing line, window manufacturing line, window angle line, tilting table, assembly table -Manufacturer: Ruchser, assembly table tilt table with roller conveyor -Tilting function: pneumatic with foot control -Individual components: see photos -Transport dimensions: 1680/1630/H955 mm -Weight: 260 kg

Clamp length: , mm Clamp width: , mm : , Nm RU-LH Painting Assistance Painting assistance for the simultaneous painting of sash and glazing ledges. A clamp has to be positioned in each corner of the already made frame. The operation is started by using a foot valve. For different thickness of ledges the clamping device is height- and depth adjustable. The positioning is diagonally and the clamps stick out of the wood about 25 mm. Now the frame can be pressed into the sash and is fixed. For the painting the frame is positioned now about 10 mm outside in front of the sash. After drying, the frame is pressed into the sash, it will be removed before the glazing. The clamps can be removed by hand for the further processing. For different thickness of ledges the clamping-device is height- and depth adjustable. The height is adjustable from 700 – 1200 mm. Advantages: Quick assembly No jammin ...

치수 (L, W) : - mm 무게 : - kg 높이 조절 가능 (예 / 아니오) : 예 0 회전 및 틸팅 테이블 RU-4 - 공압 경작 가능 - 지원 피트 포함 - 기본 치수 1500 x 1400 mm- 최대 테이블 너비가 3200 mm 로 회전합니다 - 펠트 지원, 넓 히기 위해 아래의 풀아웃 - 새시 장착 장치 및 경사 위치 정지 포함- 공구 보관 - 날씨 다리 오목한 액세서리 (선택 사항) - 수력. 리프팅 장치 250 mm, 풋 펌프, 작업 높이 900 - 1150 mm - 2 조각 운송 롤러 - 4 스위블 캐스터, 정지 장치 (제조업체에 따른 기술 데이터 - 보증없이!) 이 광고의 데이터는 LogoTech oHG의 기계 관리 인 ModulMWS로 작성되었습니다.

Number of machnines: - Loading meters, approx.: - Total weight, approx.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: ja Working width: 2500 mm 0: nein Ruchser RU-BM-2500 fitting center with fitting storage, mobile ------------------------------------------------------ Pneumatic stops Pneumatic magazine screwdriver Fittings shelf Support table covered with felt Special screwdriver Screw feeder fitting punch Customer processed Siegenai Titan AF fitting. Can be adjusted to other fittings. (Technical information according to manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: ja, freitstehend Working width: 3000 mm 0: ja RUCHSER sash assembly table RU-BM-3000 --------------------------------------- The Ruchser sash fitting center enables efficient production based on economic aspects. Well thought-out down to the last detail, the system offers maximum ease of use. Important advantages for you: Modular system, the sash assembly table is put together according to your wishes and requirements Easy to use even for inexperienced workers Equipment demonstration machine, alternative / optional equipment on request! Pos. 1.0: Article no. : 0610000 RU-BM-3000, sash assembly table, for sashes up to max. 2500 mm in height with RU-SH, special screwdriver length 3000 mm, width 1400 mm, inclination of the work platform manually adjustable. Holder for fitting scissors or fitting punch. 10 pieces swiveling commuters for hanging the Wing, completely pneumatically foldable  ...

0: 3000 mm Working height: 2500 mm 0: ja ja Glazing press with equipment ----------------- Working dimensions: Length: 3,000mm Height: 2,500mm Total length: 3,700 mm System height: 1,900 mm Press beam height: 2,200 mm ----------------- Manual width adjustment Height adjustment pneumatic lifting device 500mm ----------------- (Technical information according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): 1400 x 1750 mm Weight: , kg tiltable yes/no: ja RUCHSER assembly tilting table RU-MKS 1,4 --------------------------------------- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment demonstration machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable f ...

0: 2000 밀리미터 작동 폭: 1800 mm 바퀴 폭: 200 mm 4 개. 롤러 컨베이어 내부 및 외부 처리 용 2000 x 200 x 1800mm

0: 2750 mm Working height: 2500 mm 0: 300-1000 mm RUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022 ----------------------------------------------------- Vertical work table with lifting device and turning device. Especially Suitable for glazing and sealing wooden windows on both sides. Furnishing: System part covered with felt Infinitely variable pneumatic lifting device, Stroke of 300 mm - 1000 mm, based on roller conveyor height Turning device for sealing on both sides, with roller conveyor 150 mm roll length 2 pneumatic tensioners for clamping the window to the turning device Version with special turning device for pushing through the on the Roller conveyor set up window with applied (closed) turning device Equipment demonstration machine, alternative/optional equipment on request! Pos. 1.0: Item no.: 1000000 RU-SW3-90° vertical work table for Wooden window with ...

Number of motors: 2 Stück 0: 2380 mm Control: , 0 RUCHSER RU-GL-45° ----------------------------------------------------- Glazing bead saw at the sliding work table Developed for cutting glazing beads in pairs on the sliding work table The RU-GL glazing bead saw is mounted on a sliding work table with Scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw stuck right saw on carriage mounted to be moved manually. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. Pos. 1: RU-GL double glass bead saw 45° on the RU-SA-3000 ----------------------------------------------------- for glazing beads up to 30 ...

Number of motors: 2 Stück 0: 2650 mm Control: , 0 Ruchser RU-GLS-ED 45° glass bead saw -------------------------------------- Developed for cutting glazing beads in pairs The RU-GLS-ED45° double glazing bead saw must be adjusted to size manually. the Machine was designed for cutting glazing beads in pairs with a cutting angle of 45° and features a fixed and a movable saw unit. The manual length adjustment is equipped with an electrical digital display. It can cut lengths from 240mm - 2650mm be sawn. During the cutting process, the glazing beads with a pneumatic clamping device clamped from above and from the front to prevent tilting to prevent the glazing beads. Operation is via a safety two-hand operation Item 1: RU-GLS-ED45° double glazing bead saw ----------------------------------------------------- with manual measurement, for the pairwise Cutting glazing beads, cutting angle  ...

: 3000 Working height: 2500 mm : 300-800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0 : mm 작업 높이 : mm 0 : 0 크기 (L, W) : mm 무게 : kg 높이 조절 가능 (예 / 아니오) : 0

치수(L, W): mm 무게: kg 높이 조절 가능(예/아니오): 0

0: 4000 mm Working height: 2200 mm 0: 300 - 800 mm Dimensions (length / width): 4800 x 900 x 2500 mm Glazing and control press RU-VGPA 4 for glazing, sealing and final inspection. RU-VGPA4 glazing and control press Length 4800 mm, width 900 mm, height 2500 mm, System height 1900 mm, press beam height 2200 mm. System part covered with felt. Installation area as a roller conveyor, Lifting device from 300 to 800 mm. Two pneumatically foldable and movable press beam. Simultaneous, synchronous folding and moving the press beams over a single Foot valve, therefore requires the least amount of time Opening and closing the press. Safety control when building up pressure. (Technical description according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: , St. Width: 1000 mm Length: 1720 mm Commission car RU-KWI-S --------------------------------------- The RU-KWI-S is for internal and truck transport. In When unloaded, it can be nested. For forklift and Suitable for crane transport. --------------------------------------- Equipment and accessories: -With a removable crossbeam so that the consignment trolleys are unloaded State can be pushed into each other. -With 4 crane hooks, 4 forklift brackets and 4 lashing strap holders. -Mobile on 4 polyamide swivel castors Ø 150 mm, 2 of which have brakes. -Steering rollers can be removed, so the commission trolley can stand securely on the truck. -Other equipment and accessories as for RU-KWI. --------------------------------------- Technical details RU-KWI-1600S: - Length 1,720mm - Width 1,000mm - Height 1,950mm - System height 1,500 mm - Usable width 700 mm - Weight 85kg The painting is do ...

: 3400,4550 mm Working height: 2500 mm : 300 - 800 mm Glazing and control press RU-VGP3 Glazing and sealing press, clamping width max. 3150 mm, Length 3400 mm, width 900 mm, height 2500 mm, contact height 1900 mm, Pressing beam height 2400 mm, plant part covered with felt, installation surface as roller conveyor, lifting device from 300 - 800 mm. Left and right each a role as edge protection for elements up to 2500 mm height. (When ordering specify whether RIGHT or LINKER Pressbar mobile!) alternatively: ------------- RU-VGP4 Glazing and control press, version like RU-VGP3 however span max. 4000 mm, length 4550 mm (When ordering specify whether RIGHT or LINKER Pressbar mobile! (technical data according to manufacturer - without guarantee!) Price on request ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 18 St. Depth: 800 mm Length: 2300 mm Height: 1500 mm weight: 90 kg Profile trolley RU-PW1SH One-sided for wooden profiles ------------------------------- Vertical storage and transport of cut wooden profiles Furnishing: -Easy loading and unloading - Sorting combs covered with PVC tube, -Set-up area as a plan board or bar grid floor -Available on one and two sides -Compartment bracket and clamping plate available separately -Mobile on 4 polyamide swivel castors, 2 of which have brakes Technical specifications : RU-PW-1SH 18/100 Length 2,300mm Width 800mm Plant part height 1500 mm subjects 18 Compartment width 100 mm (adjustable) Compartment depth 400 mm Weight 90kg Installation surface made of planboard. With 4 plastic Swivel castors, Ø 150 mm, 2 of which have brakes. ------------------------------- Price ex works plus shipping and packaging: on request ------------------------------- ...

Clamp length: - mm Clamp width: - mm : - Nm Glazing bead nailing device 2 P Jumbo automatic E.C. - new - Your advantages: - The corner joints are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames can be easily assigned Staple Corner Joining Machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. choice between automatic and manual operation, With angle system, clamping device from above and from the front Pressure separately adjustable. Insertion of parallel and superimposed Clamping possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----------------------------------------------------- Price in this version on request! Plus the current material cost requirement from 300.82 euros Plus packaging/shipping Surcharges: --------------------- Mobile work t ...

0: ja, 30 Faecher 작업 폭: 2250 mm 0: nein Ruchser RU-BM 2500 ---------------------- 피팅 선반이 있는 피팅 테이블 올리브 드릴링 장비 가 있는 30개의 구획 핸드 스크루드라이버 에 공급되는 Uniqick 2000 나사 매거진 판매 전 위치, 여전히 사용 중인 것을 볼 수 있습니다! (제조업체에 따른 기술 정보 - 보증 없음!)

0: , 0 0: , kg

Usable length: 3000mm, load: 50kg/m, connected load: 1.5kW, length: 3500mm, width: 550mm, weight: 208kg.