사용 RÖHM 판매를 위해

발톱 긴장 턱 원시 부품과 톱 부품. 단지 2.5mm 재료 손실. 기계 및 유압 악덕 모두. 1 클램핑으로 5면 가공이 가능합니다. 길이: 90, 125, 160, 200mm ALLMATIC, ROEHM, GRESSEL 악덕에 대한 유형입니다. 제조업체에서 직접 저렴하게!

롬 KFD-1000/3 3/32 파워 척 - 미사용/신품 건축 년도: 2019 파워 척 RÖHM KFD-1000/3 3/32 ZA520 M30 OD KH42 BH15,2 제품 번호 : 84662091 원산지 : 독일 H 솔리드 칩 실린더 OVS-200 SV 4,500RPM 스트로크 50 제품 번호 : 84662091 EAN 번호 : 4019208232577 원산지 : 독일 스트로크 컨트롤 KP F90 OVS-200 제품 번호 : 84662091 EAN 번호 : 4019208235059 원산지 : 독일 사진에 표시된 다른 모든 액세서리는 배송 범위에 포함되지 않으므로 이 판매의 일부가 아닙니다. 배송 범위에는 주문 확인서 및 송장에 여기에 명시적으로 나열된 액세서리만 포함됩니다. 사용 설명서 – 보증이 없는 그림, 내용 및 정보이므로 구속력이 없음 – "PDF. 그 당시 NEW PRICE 순 20.400 € 특별 가격 브랜드 뉴 넷 14.900 € 프리 로딩 트럭 -  ...

새로운 페이스 플레이트 Roehm만큼 좋습니다. 600 밀리미터 직접 녹음 캠록 - 8

전기 – 하이드.- 기계 바이스 제안 번호: 50105 만들기: 롬 유형: 744 - 05 기계 번호 : xxxx 건축 년도: 약. 1993 사양: - 전기 - 수력. 기계 부사장 - 별도의 유압 장치 포함 - 및 E. 발 버튼을 열고 - 클램핑 턱을 닫습니다. - 턱 폭 200 mm - 턱 높이 75 mm - 클램핑 범위 약. 0 - 350 밀리미터 - 가이드 웨이 높이 약. 100 밀리미터 - 총 높이 185 mm - 별도의 유압 장치는 RÖHM을 만들고, 유형 HA 707 - 80 - 시작 400 V / 0.37 kW - 대략 무게. 100 킬로그램 - 대략적인 공간 요구 사항. L ~ 850 x W 280 x H 185 mm

직경: 630mm. 4턱 미니 선반 척 본체는 주철로 만들어졌으며 총검 콘 8.

4턱 라이닝 ø 500 mm 아주 좋은 상태 스핀들 홀더 베이스 베이킹과 탑 베이킹

새로운 3 죠 척 RÖHM DURO T250을 사용했습니다. 웨지 바 척 3 개의 스냅 패스너를 포함한 3 죠 척 ♦ 스핀들 플랜지용 원통형 리셉터클 사진: 3턱척 No. 437478-1526 ♦ 새로운 베이스 턱과 새로운 상단 턱만큼 좋은: ♦ 피드 키 포함: 무게로 인해 안감은 화물 운송업체에서 픽업하거나 보낼 수 있습니다. 문의 사항이 있으시면 주저하지 마시고 저희에게 연락해 주십시오.

터닝 척 RÖHM 직경 160 mm 3- 베이킹 최대 3600 rpm 새것만큼 좋은!

아주 좋은 3 턱 척 중심적으로 흥미 진진합니다 øA= 315 밀리미터 ø 나 = 100 mm 원통형 콘센트 척 플랜지 DIN 55027 요청 시 새 드릴 턱만큼 좋은 포함 요청 시 스위블 죠 제공 전달 또는 픽업

재고 번호: 3805 기계 바이스 제조사: ROEHM, 유형: RKK 2 기계 번호: 983 004 N 사양: 폭 115mm 최대 öfning das schaubstock 0-170 mm 길이: 350 mm, 높이: 133 mm, 폭: 125 mm, 무게: 33 kg

재고 번호: 3806 기계 바이스 제조사: ROEHM, 유형: RKK 2 기계 번호: 151953 0004 P, 제조 연도: 0 사양: 폭 115mm 최대 öfning das schaubstock 0-170 mm 길이: 350 mm, 높이: 133 mm, 폭: 125 mm, 무게: 33 kg

프리즘 턱, 125mm 폭의 둥근 부품, 1형, D4-20mm, D6-40mm 2배, 유형 2, D4-20mm 및 D9-62mm

diameter:310 mm weight of the machine ca.:0,03 t bore:65 mm

faceplate diameter:620 mm weight of the machine ca.:0,15 t Bore:130 mm

faceplate diameter:500 mm weight of the machine ca.:0,1 t 4-jaw faceplate for studs and locknut

Description: Additional information: - Manually operated, - as a range of clamping mandrels for different clamping diameters, - with clamping sleeve, technical features (hardened, low-wear version / MZE), area of application: - internal clamping of round workpieces. - measuring operations and light grinding operations. - ideal for large clamping lengths or long workpieces. Advantages: - Tool-free quick change of the clamping sleeve, - High concentricity and repeatability, - High flexibility thanks to mounting on the shaft or between centers, - Short changeover times, Contents in a storage box Quantity = 5 pieces: - Basic mandrel MZE, size 2, with centering hole, for internal clamping No. 315002 - Basic mandrel MZE, size 3, with centering hole, for internal clamping No. 315003 - Basic mandrel MZE, size 4, with centering hole, for internal clamping No. 315004 - Basic mandrel MZE, size 5, w ...

Description: Jaw width: 160 mm Approx. Onsite Dimension. (l x w x h): 600 x 250 x 160 mm, weight approx.: 80 kg

Description: Jaw width: 160 mm Approx. Onsite Dimension. (l x w x h): 600 x 400 x 400 mm, weight approx.: 100 kg

Machine vice, stable vice, drill vice -Back width: 110 x 30 mm -Tension depth: max 132 mm -Tension: centric -Dimensions: 345/135/H95 mm -Weight: 11.7 kg

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck, three-jaw lathe chuck, face spiral chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 380 mm -Passage: Ø 115 mm -Holder: M230 x 4 / cone 125 - 147 mm -Weight: 92kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 350 mm -Rezess: Ø 80 mm -Hole circle: Ø 127 mm -Through hole: Ø 40 mm -Weight: 40 kg

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -Chuck size: Ø 200 mm -Single and complete jaws: adjustable -Bajonet: short cone flange, cone size 6, bolt circle 133.4 mm -Passage: Ø 55 mm -Weight: 23 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 160 mm -Passage: Ø 42 mm -Hole circle: Ø 133 mm -Receptacle: Short cone 6 / cone 103 - 105 mm -Weight: 10.5 kg

Lathe driver, center turning device -Outer: Ø 220 -Cone: Ø 106 mm -Short taper: 6 -Hole circle: Ø 133 mm -Weight: 6.4 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck Chuck size Ø 240 mm -Passage: Ø 53 mm -Bolt circle: Ø 70 mm -Weight: 27 kg

moving point, moving center point, moving Morse taper, moving center point, moving lathe point, center point -Manufacturer: Rohm, revolving center point with draw-off nut -Type: size 486 -Recording: MK6 -Dimension: Ø 155 x 360 mm -Weight: 13 kg

live point, live center, live morse taper, live -Manufacturer: Röhm, live center type 110 H -Barrel tip: shaft-bearing -Intake: MK5 -Number: 2x center point available -Price per piece -Dimensions: Ø 92/255 mm -Weight: 4.7 kg/pc.

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Thread: M16 -Weight: 83 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Shot: short taper 8 -Weight: 79 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Rohm, three-jaw chuck with clamping plate -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 130 mm / M8 -Clamping plate: approx. 250 x 250 mm, dimensions see photo -Weight: 25kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 240 mm -Passage: Ø 77 mm -Hole circle: Ø 220 mm -Weight: 18 kg

revolving tip, revolving center point, revolving Morse taper, revolving -Manufacturer: Röhm, rotating centering tip type 110 H -Barrel tip: shaft-mounted -Recording: MK5 -Quantity: 1x centering tip available -Price per piece -Dimensions: Ø 90/257 mm -Weight: 4.4 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Clamping force: max. 90 KN -Equipment: short taper 6 (106 mm) -Chuck size: Ø 210 mm -Weight: 22 kg

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice -hydraulic voltage defective -is sold as dismanteld -Jaw width: 160 mm -Back height: 53 mm -Span width: max. 170 mm -Height support: 80 mm -Weight: 62 kg

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Take shaft: MK3 -9x: sleeve MT1 -7x: sleeve MT2 -4x: sleeve MT3 -Thread recordings: 3 -Weight: 16.8 kg

Drill chuck, keyed drill chuck -Manufacturer: Röhm, drill chuck Gear ring drill chuck MK2 -Type: S 1.5-13 1/16-1/2 J2 S2 -Clamping range: 1.5-13 mm 1/16-1/2 -Dimension: Ø 44 x 150 mm -Weight: 0.5 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 80 mm -without: interchangeable jaws -Flange: 175 mm -Passage: Ø 19 mm -Dimensions: Ø 175 x 250 mm -Weight: 8.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Rohm, base jaws for four-jaw chuck 2 set -Type: ID.: 107546 jaw width 20 mm -1 set: with soft top jaws, width 30mm -Price/sale: only complete -Dimensions: 200/90/H70 mm -Weight: 4.7 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 125 mm -without: interchangeable jaws -Passage: Ø 32 mm -Number: 1x feed available -Price: per piece -Weight: 5.4 kg

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Jaw width: 200 mm -Back height: 65 mm -Span width: max. 345 mm -Dimensions: 730/300/H170 mm -Weight: 125 kg

Machine vise, sturdy vise, drill vise -Span width: 138 mm -Jaw width: 160 mm -Back height: 45 mm -Dimensions: 500/350/H160 mm -Weight: 50 kg

moving point, moving center point, moving Morse taper, moving center point, moving lathe point, center point -barrel tip: shaft-mounted -Recording: MK6 -Number: 1x centering points available -Price: per piece -Weight: 8 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Passage: Ø 103 mm -Hole circle: Ø 195 mm -Weight: 56 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Throughout: Ø 105 mm -Pole circle: Ø 235 mm / M20 -Take: short taper 11 -Weight: 56 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 24 mm -Dimensions: see photo technical drawing -Total dimensions: 90/70/H65 mm -Total weight: 2.2 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Throughout: Ø 77 mm -Weight: 18 kg

Four-jaw chuck, four-jaw lathe chuck, precision four-jaw chuck, chuck, faceplate, 4-jaw chuck -Manufacturer: Röhm, Precision four-jaw chuck Ø 260 mm -Passage: Ø 70 mm -Bolt circle: Ø 105 mm -Recording: Short cone 5 -Jaws: individually and fully adjustable -Weight: 27.4 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: 240 mm -Mounting flange: M80 x 6 mm -without: interchangeable jaws -Weight: 26 kg

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -Chuck size: Ø 200 mm -Beeks: individually and completely adjustable -Rezess: Ø 160 mm -Hole circle: Ø 176 mm -Passage: Ø 55 mm -Weight: 18 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: O 80 mm -Jaws: 1 set -Flange: 177 mm -Passage: O 19 mm -Dimensions: O 177 x 190 mm -Weight: 8.4 kg