사양: 유압 핫 프레스 작업 테이블의 치수 mm : 3,000 x 1,300 장착 된 뱀 테이블 최대 온도: 120°. 피스톤 수: 직경 6개 Ø 65 mm 설치 용량 KW: 30,5 중간 플레이트로 완성 대열 오일 작동 전기 기름 보일러로 완성
중고 핫 프레스 ORMA 모드. NPC-6/100 - 터치 스크린이있는 새로운 PLC - 압반 치수 2500X1300 mm - 추가 플레이트 - N. 6 실린더 - CE 규칙 - 2001년 - 킬로와트 2.2 - 설명서와 세륨 증명서로 완전한
CE 표준에 따른 ORMA 디스크 접착 및 스크류 기계 4 롤 접착기 모델 I / 413 : - 작업 폭 1300mm - 유효 작업 높이 100mm - 이중 동력화, KW 0.75+0.75 - 코팅 롤러 D=250mm - 도징 롤러 D=180mm - 자동 브러시 와셔 포함 디스크 경로: - 유용한 작업 치수 3000x1300mm - 기계식 가변 속도 드라이브 - 최종 광전지 포함 년 2007년, 세륨 기준에 따라 기계.
선반 프레스 ORMA NPC 300 6/110 선반 크기 3000x1300mm 유압 피스톤의 수: 6 피스톤간 직경 70mm 물로 가열 프레스 CE 인증
사양: 01 유압 프레스 ORMA LS/R-45/13 치수: 4500 x 1300 mm 08 피스톤 Ø 70 mm 02 랙 앤 피니언 플런저가 있는 피스톤 스트로크: 200 mm 01 로딩 롤러 컨베이어 4500 x 2200 mm 01 언로딩 롤러 컨베이어 4500 x 1300 mm (스톱 포함) 액세서리: 01 발전기 HF 40Kw 01 더블 롤 접착제 01 매니퓰레이터 ELEPHANT 200kg 길이: 4000 mm
Description: ORMA SPAZZ SUP INF Hydraulic Press with feeder Cleaning Brushing Top and Bottom working 1300 mm dimension (l x w x h) approx. (3 packs) 4340x1990x3400 mm 1050 x 560 x 1550 mm 3750 x 1300 x 1750 mm Approx. Onsite Dimension. (l x w x h): 4,340 x 1,990 x 3,400 mm, weight approx.: 12,000 kg
Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0
Hot press Make: ORMA Type: NPC/DIGIT 6/95 New machine Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (120°C) Optional: - Aluminium coating for panels - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - 4 side loading - Max. temperature up to 150°C - Max. temperature up to 200°C - Mylar protection foil - Pressure plate covered with glass fier fabric Teflon - Hardware for Industry 4.0
Veneer press Brand: ORMA Type: NPC/DIGIT 6/90 New machine Technical datas: Press area: 2500x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (up to 120°C) Optional: - Aluminium coating - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - Extra charge for temperature up to 150°C - Extra charge for temperature up to 200°C - Mylar protection foil 350,00 ? per panel - Pressure plate covered with glass fiber fabric Teflon - Hardware for Industry 4.0
Maximum panel dimensions (for 3D wrapping) 1240x2740 mm Pressing cylinders 6 pcs Piston diameter 140 mm Piston stroke 190 mm Total maximum counter pressure 200 T Pneumatic pressure at work (max) 5 Kg/cm Room height 160 mm Upper and lower flange 40 + 20 mm Part size / manual pin placement area (maximum) 1250x2550 mm Minimum foil width 1400 mm Minimum plate thickness 15 mm Working height (distance from the floor to the level of the loading tray) 930 mm Maximum temperature of the heating liquid 130°C Air tank capacity 500 liters Total installed power 50 kW Dimensions (L x W x H) 11500x2950x2550 mm Weight 12800 kg In accordance with CE standards
3 trays Table length: 3250 mm Machine is in excellent condition It has been used as spare machine in factory.