압축기, Mark MSA 11kW, 중고 기술적 인 특징들: 설치된 엔진의 출력 : 11 kW / 15 hp 작동 압력: 10 bar 유효 공기 유량: 1.43bar에서 9.5m³/min 소음 수준: 63dB(A) 압축 개념: 오일 윤활 스크류 압축기 냉각: 공냉식 드라이브: 능률적인 IE3 모터, 벨트 드라이브 제어: 고정 속도 제어: ES3000 크기 : L x W x H : 995 x 655 x 1045 mm 무게: 235 kg
MARK 흡착식 드라이어 ADS 27 S -40 230 V, 중고 사양 유효유량 2,700 l/min 최대 작동압 14bar 표준 이슬점 -40 °C 공기 배출구 1 인치 치수: 620x401x1285 mm 무게 99 kg
유형: 냉매 압력 건조기 제조사: Mark Kompressoren 공칭 용량: 1.20m³/min 표준 조건 하에서 >: - 작동 압력 7 bar - 작동 온도 35°C - 주위 온도 25°C - 압력 이슬점 +3°C) 최대 압력: 13 bar 연결: G 3/4'' 전압: 230V/50Hz 치수 LxWxH: 350 x 500 x 450 mm
Description: Compressor  , Manufacturer Mark, year of manufacture 2018,operating pressure 7 bar, maximum pressure 13 bar, 3 kW, 50 Hertz, Maintenance on 22.2.2024 at 290247 operating hours,  ,filter + oil replaced , Boiler , Manufacturer Maschinen und Behälterbau GmbH, type MB 030603 - 2,500, volume 500 l, year of construction 2012 Dryer TypeMDX 6500 ( E9 ), year of construction 2022, ,weight 82 kg, ,230 Volt, 50 Hertz, 1.54 kW, operating pressure 14 bar, maximum pressure 14 bar Condensate conditioner BEKO Öwamat 2, last maintenance on 22.02 2024 Activated carbon replaced , Approx. Onsite Dimension. (l x w x h): 2,000 x 2,000 x 1,500 mm, weight approx.: 400 kg
Description: Operating pressure 7 bar, maximum pressure 13 bar , 400 volts, 50 hertz, 3 kW Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm, weight approx.: 250 kg
Description: Operating pressure 8 bar Maximum pressure 8 bar , 400 volts, 50 hertz, 3 kW , Maintenance on 22.2.2024 at 3757 operating hours. all filters + oil replaced Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm, weight approx.: 235 kg
Compressed air dryer, refrigeration dryer, dryer, compressed air refrigeration dryer -Drying capacity 1200 L / min -Max. Pressure: 13 bar -Operating voltage: 240 V -Dimensions: 485/350 / H450 mm -Weight: 23.5 kg
feed pressure: 10,0 bar Effective free air delivery: 1.680 L/min motor: 400 V 0: 500 Liter weight of the machine ca.: 348 kg. total power requirement: 15,0 kW range L-W-H: 1240 x 650 x 950 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 7.476 euros Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. operational pressure: 10bar, connected load: 11kW, weight: 235kg, an inspection is possible.