Inv. 번호 : 7225 유형: SBM - XS 300 G1E1 프로듀서: LISSMAC 생성 : 2015 매개 변수: 시간 : 166 최대 시트 플레이트 폭: 15mm 무게 : 1400 kg
리스맥 MBS 510 벽돌 밴드 톱 무게 173kg 절단 높이 최대 510 mm 절단 길이 최대 700 mm 톱날 길이 3750 mm 치수 톱 테이블 920/710 mm 적재 능력 톱 테이블 최대 50kg 치수: 1080/750/1840 mm 폭기 콘크리트 및 벽돌 지&LISS-803031
Posimat PB 80은 공압식 핸들링 장치입니다. 버전: 균형추로, 현장 철골 공사에 매달아 놓았습니다. 사양: 적재 능력: 120kg; 허브; 1,600 mm; 작동 범위 (반경) 2,600 mm; 평형추 및 컬럼 제외 자중: 150 kg 이 장치는 몇 달 동안만 사용되었습니다.
최대 중량 처리. 400kg, 리치 9,000mm, 이동 속도 3m/sec., 출력 45kW, 무게 1,600kg, 완전 유압식 구동, 벽 조립식에 사용됨, 기타 플랜트 구성 요소 사용 가능, 관심이 있으시면 당사에 문의하십시오.
working width: 950 mm workpiece width - max.: 1,0 - 50 mm sandingbelt width: 970 mm sandingbelt length: 1900 mm weight of the machine ca.: 1,8 t The SMD 123 RE is a universal entry-level machine for all-round deburring Uniform edge rounding and surface grinding of sheet metal dry process. Suitable for processing steel, stainless steel and aluminium. The non-slip conveyor belt enables safe transport and the Machining even of small workpieces. The two rotor heads ensure an all-round uniform Edge rounding and a directionless finish. The intuitive operation via touch panel allows every employee get to grips with the machine quickly. The SMD 1 models are installed and ready for operation in a short time. The compact design saves valuable production space. Low acquisition and operating costs lead to short amortization periods and guarantee economical processing of your workpieces. consi ...
working width: 1000 mm workpiece width - max.: 0,5 - 50 mm sandingbelt width: -- mm weight of the machine ca.: 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. Machining on both sides saves time-consuming turning of the workpieces and edit twice. All pairs of aggregates can be switched on/o ...
Nominal power: 65kW, connected load: 76kVA, weight: 4.2t, including extraction and measuring devices.
max. working width: 1500 mm workable material thickness: 20 mm Tension: 400 V / 50 Hz Total power: 28,5 A Total current consumption: 12,6 kW Insulation class: IP54 Infinitely variable feed speed: 0-4 m / min Length: 2730 mm Width: 1500 mm Height: 1532 mm Machine weight: 2200 kg
max. working width: 1000 mm workable material thickness: 0,5 - 120 mm Working hours machine: h Total power: 98 A Total current consumption: 45 kW Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3790 kg
max. working width: 1000 mm workable material thickness: 20 mm Tension: 400 V / 50 Hz Total power: 28,5 A Total current consumption: 12,6 kW Insulation class: IP54 Infinitely variable feed speed: 0-4 m / min Length: 2230 mm Width: 1500 mm Height: 1532 mm Machine weight: 1700 kg
max. working width: 1000 mm workable material thickness: 20 mm Tension: 400 V / 50 Hz Total power: 28,5 A Total current consumption: 12,6 kW Insulation class: IP54 Infinitely variable feed speed: 0-4 m / min Length: 2230 mm Width: 1500 mm Height: 1532 mm Machine weight: 1700 kg
This LISSMAC SBM XL 1000 S2B2 Deburring machine was manufactured in the year 2013 in Germany. It is a machine for steel, stainless steel and non-ferrous metals works. It has a touch screen control and an anti slip carpet. It also has 2 type B metal brushes to descale and 2 S-type tools flexible abrasive blocks for rounding contours.
This LISSMAC SBM-XS 300 Deburring Machine was manufactured in 2017 in Germany. It has only 570 working hours, like new. This machine works with a max. plate dimensions of 200 x 200 x 15 mm (grinding of both sides) and includes a set of completely new grinding brushes.
The machine is in good technical condition. Maximum workpiece width: 300 mm Maximum workpiece width and length (double-sided processing): 200 mm Minimum part size: 25 x 25 x 1mm Min. and max. thickness workpiece: 1-15mm Feed speed: 0-2m/min Workpiece thickness setting: electric Tool setting: manual Total machine power: 5kW Total current consumption: 8A Weight: 1400kg Dimensions: 1300 x 2300 x 1900mm 517 engine hours have been worked on the machine. The machine comes with a new set of grinding wheels worth 1700 Euros - they have not been installed yet. By prior arrangement, the possibility of a tour in progress.
Equipped with 2 grinding units Including wet extractor (suitable for aluminum, among others)