사용 LAUFFER 판매를 위해

가압력 60 ~ 설치 높이 500 mm 프레스 플런저의 스트로크 300 mm 컬럼 사이의 통로 430 mm 플런저 보어 40D H7 클램핑 테이블 430 x 310 mm

pressure:200 t distance between columns:970 mm stroke:360 mm Distance table/ram, max. stroke up, adjustment up:630 mm table surface area:1000 x 800 mm capacity of ejector:10 t ejector stroke in table:160 mm table height over floor:850 mm side window:400 mm ram surface:1000 x 800 mm speed down:420 mm/s speed up:410 mm/s working speed:50 mm/s oil volume:1240 l return capacity:24 t power requirement:45,0 + 15,0 kW weight:16,0 t dimensions (WxDxH):2,7 x 2,5 x 4,3 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:mechanisch foundation pit:nicht erforderlich

pressure:100 t throat:540 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1000 x 1000 mm pressure of drawing cushion in table:50 t stroke of drawing cushion in table:200 mm die cushion area:710 x 650 mm table height over floor:910 mm ram surface:1000 x 1000 mm capacity of ejector in ram:2 t ejector stroke in ram:200 mm return capacity:19,5 t speed down:400 mm/s speed up:300 mm/s working speed:57,7 mm/s oil volume:650 l power requirement:37,5 kW weight:15,0 t dimensions (WxDxH):1,5 x 2,5 x 4,45 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion / ejector in table:hydraulisch ejector in ram:hydraulisch depth stop:mechanisch

pressure:320 t distance between columns:1530/1370 mm stroke:320 mm distance table/ram, stroke up:830 mm table surface area:1500 x 650 mm die cushion pressure in table:12,5 t table height over floor:1100 mm side window:570 mm ram surface:1240 x 650 mm capacity of ejector in table:12,5 t speed down:450 mm/s speed up:440 mm/s working speed:63,6 mm/s oil volume:2100 l power requirement:2 x 45,0 kW weight:27,0 t dimensions (WxDxH):4,0 x 2,3 x 4,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic drawing cushion in ram:hydraulic ram interlocking:hydraulic Option: NEW electrical controls:Siemens S7-1500 F

pressure:160 t distance between columns:1580/1360 mm stroke:320 mm distance table/ram, max. stroke up, adjustment up:830 mm table surface area:1460 x 850 mm table height over floor:1100 mm side window:870 mm ram surface:1400 x 850 mm speed down:540 mm/s speed up:520 mm/s working speed:26 - 85 mm/s oil volume:2100 l power requirement:45,0 kW weight:22,6 t dimensions (WxDxH):4,0 x 2,3 x 4,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:hydraulisch

pressure:160 t distance between columns:1600/1420 mm stroke:345 mm distance table/ram, max. stroke up, adjustment up:830 mm table surface area:1460 x 850 mm table height over floor:1100 mm side window:770 mm ram surface:1410 x 850 mm speed down:540 mm/s speed up:520 mm/s working speed:26 - 85 mm/s oil volume:2100 l power requirement:45,0 kW weight:23,0 t dimensions (WxDxH):4,0 x 2,3 x 4,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:hydraulisch

pressure:350 t distance between columns:1350 mm stroke:900 mm distance table/ram, max. stroke up, adjustment up:1300 mm table surface area:1300 x 1000 mm pressure of drawing cushion in table:100 t stroke of drawing cushion in table:380 mm die cushion area:350 x 285 mm capacity of ejector in ram:25 t ejector stroke in ram:200 mm table height over floor:750 mm ram surface:1300 x 1000 mm speed down:500 mm/s speed up:160 - 470 mm/s working speed:16 - 44 mm/s drawing speed:57 - 160 mm/s return capacity:32 t oil volume:1700 l power requirement:91,0 kW Dimensions (WxDxH):3,75 x 2,8 x 7,2 m height over floor:5,28 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick drawing cushion in table:hydraulic ejector in ram:hydraulic ram interlocking:in TDC foundation pit:necessary

pressure:200 t distance between columns:1800 mm stroke:710 mm Distance table/ram, max. stroke up, adjustment up:1100 mm table surface area:1600 x 1300 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:250 mm die cushion area:1400 x 1080 mm table height over floor:800 mm side window:1300 mm ram surface:1660 x 1300 mm speed down:400 mm/s speed up:410 mm/s working speed:14,3 - 49,7 mm/s power requirement:46,0 kW weight:25,0 t Dimensions (WxDxH):3,65 x 3,3 x 5,4 m height over floor:5,05 m height beneath floor:0,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard at front and back:Sick drawing cushion in table:hydraulic ejector in ram:hydraulic depth stop:mechanical

Table dimensions: 560x450mm.

Oil capacity: 170l.

Max. pressing force: 4000kN, max. stroke: 500mm, installation height: 1100mm, table dimensions: 1200x800mm, max. working pressure: 300bar, weight: 23t, with documentation, was maintained regularly, an on-site inspection is possible.

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Pressure total: 160 ton Stroke: 500 mm Daylight: 710 mm Free frontal opening L-R: 820 mm Free lateral opening F-B: 320 mm Table surface area : 800 x 630 mm Slide area: 800 x 630 mm Table height over floor: 800 mm Die cushion capacity in table: 63 ton Die cushion stroke: 200 mm Die cushion pad area: 630 x 450 mm Approach speed: 400 mm / sec Working speed: 17 - 45 mm / sec Return speed: 230 mm / sec Required power: 30 kW Weight of machine approx.: 13,6 ton

CONTROLS   electronic controls PRESS DESIGN   frame design: 4 column PRESS FORCES   total force (nominal): 400 to PRESS TABLE   table surface (left-right): 1200 mm   table surface (front-back): 800 mm SLIDE   slide force: 400 to   table surface (left-right): 1200 mm   table surface (front-back): 800 mm   stroke: 500 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 290 mm/s   working velocity min.: 25 mm/s   return velocity max.: 290 mm/s   return force: 35 to TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1100 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2255 mm   space requirements -front/b ...

Capacity: 100 t Stroke of each cylinder: 200 mm Width material maximum: 10 mm Distance grippers maximum: 710 mm Lauffer PT Hydraulic frame presses for metal forming; From 630 kN to 10.000 kN freely configurable for your application. Whether forming, punching, cutting or embossing, solid and variable press frame concept allows individual adaptation of the press size to your requirements. For smaller presses in monobloc design  R-PTFrame presses with column-guided ram, centric cutting shock-damping and fixed stop Capacity Kg:           100000 Distance between column:710mm Table Length:          710mm Table Width:           560mm Table Height:          450mm Ram stroke:            200mm Approche speed:         ...

Sheet thickness: 25,00 mm void: 2 Table length: 710 mm Table width: 560 mm Knife length: 200 mm Lauffer PT Hydraulic frame presses for metal forming; From 630 kN to 10.000 kN freely configurable for your application. Whether forming, punching, cutting or embossing, solid and variable press frame concept allows individual adaptation of the press size to your requirements. For smaller presses in monobloc design  R-PTFrame presses with column-guided ram, centric cutting shock-damping and fixed stop Capacity Kg:           100000 Distance between column:755mm Table Length:          710mm Table Width:           560mm Table Height:          450mm Ram stroke:            200mm Approche speed:        350mm/min. Work ...

Capacity: 250 t Stroke: 800 mm Distance between uprights: 800 mm Day light: 0 mm Table length: 1000 mm Table width: 800 mm R-PTFrame presses with column-guided ram, centric cutting shock-damping and fixed stop Capacity Kg:           250000 Distance between column:800mm Table Length:          1000mm Table Width:           800mm Length:                2800mm Width:                 1800mm Height:                3700mm Weight:                15000kg

Sheet thickness: 25,00 mm void: 2 Table length: 710 mm Table width: 560 mm Knife length: 200 mm Lauffer PT Hydraulic frame presses for metal forming; From 630 kN to 10.000 kN freely configurable for your application. Whether forming, punching, cutting or embossing, solid and variable press frame concept allows individual adaptation of the press size to your requirements. For smaller presses in monobloc design  R-PTFrame presses with column-guided ram, centric cutting shock-damping and fixed stop Capacity Kg:           100000 Distance between column:755mm Table Length:          710mm Table Width:           560mm Table Height:          450mm Ram stroke:            200mm Approche speed:        350mm/min. Work ...