2004년 독일에서 제작된 공구 프리세터인 KELCH KALI-tec은 정확한 측정, 사전 설정 및 동시 공구 수축을 위한 첨단 장치입니다. 인덕션 코일이 통합된 최첨단 KELCH 공구 프리세터는 지능형 이미지 처리 기능이 있는 전자 측정 시스템, KELCH EasyVision 및 공구 측정 및 검사를 위한 KELCH Easy Webset 컴퓨터 소프트웨어 등을 포함하는 장비와 함께 제공됩니다. 공구 길이는 척 가열 단계 전에 설정 어댑터에 의해 결정됩니다. KALI-tec A 공구 측정 및 프리세팅 머신은 척 개방 단계에서 가열을 통해 공구를 목표 길이에 정확하게 자동으로 설정하는 반면, 보다 복잡한 측정 작업이나 고속 강철로 제작된 공구의 경우 KELCH i-tec 열박음 장치는 지능형 계산 및 설정 핀의 사전 위치 지정을 사용하여 공 ...
품번:27-06-007 제조사: Kelch 아주 좋은 일반 상태 배송 시간 : 판권 소유. 건축 년도 : ca.1989 L x W x H: 약 600x400x600mm 무게 : 약. 40kg 적합 대상 : 공구 홀더 보관 / SK 40 요청시 다른 액세서리 제공 요청 시 가격 및 기타 기술 데이터 제
다양한 공구 픽업 콘을 청소하기 위한 모듈식 청소 장치 - 장치의 지속적인 작동을 방지하기 위해 통합 타이머 스위치가 있는 안정적인 하우징 - 안전하고 쉬운 작업을 위한 인체공학적 설계 - 녹 및 냉각 윤활제에 대한 내성 - 심하게 더러워진 또는 수지 공구 홀더 포함 된 것 -드라이브 - HSK-63 공구 홀더용 부착물 사전 판매 및 기술적 오류가 있을 수 있습니다.
Z축 이동 거리(공구 길이) 최대 500 mm X축 이동 거리(공구 직경) 최대 330 mm 툴 홀더(베이직 홀더) SK 50 캘리브레이션 에지가 있는 툴 홀더 SK 40용 캘리브레이션 어댑터 포함 라벨 프린터 포함, 교체용 라벨 포함 POS-CAM II 카메라 시스템 카메라 시스템은 2020년에 리뉴얼되었습니다. 도구 프리세터는 매우 깔끔한 상태이며 점검, 청소를 거쳐 즉시 사용할 수 있습니다. 설명서 및 사용 설명서를 사용할 수 있습니다. 카메라 시스템을 사용하여 공구 절삭날을 검사할 수도 있습니다(마지막 사진).
게브르. 공구 트롤리 - 24개 공구용 Kelch의 CNC 트롤리 ISO 50 공구 인서트 24 개 치수 (LxWxH) 500 x 850 x 1100 mm 다양한 공구 SK 50 DIN 69871 그림과 같이 다양한 도구 및 마운트 포함
게브르. ISO 50 / SK 50 성배 고정구용 공구 트롤리 CNC 트롤리 - 접이식 테이블 포함 - 공구 인서트 32 개 치수 (LxWxH) 500 x 850 x 1100 mm 접이식 테이블 포함 430 × 430mm
공구 캐리어 시스템 Kelch TUL System으로 공구 캐리어 트롤리를 판매하십시오. 상태: 사용 된 구성 1 PC 자동차 Tulmobil 시스템 2 모델 S2; SK40용 16개 TUL 시스템 잔 46 개 SK 40 공구 홀더, 5 개의 조 척, 1 개의 측정 척, 콜릿 OZ462E가있는 21 개의 콜릿 홀더; 3 콜릿 척 OZ, 2 콜릿 척 OZ 약 90mm 길이, 톱날, 롤러 엔드 밀, 커터 헤드 등을 위한 맨드릴 칩 플라이어 MK1
약 48Sk40 마운트용 Kelch TUL 시스템 도구 트롤리를 판매하십시오. 그림과 같이 WZ 녹음이 장착되어 있습니다. 아주 좋은 민트 상태. 자동차는 실험실 작업장에서 나옵니다
measuring range X-axis:-50 . 530/830/1030 mm measurement range Z =:605/805/1005 mm tool taper:30 & 40 VDI compressed air:6 bar dimensions:2200 x 1200 x 2100 m machine weight ab.:900 kg Vertical Toolsetter with Cutting Edge detection via Camera System. Operating over CNC Control yb PC System or Manually, 3 axes, CNC Equipped with Modular Prescision Spindle with CNC Rotary Axis. Digital Glas Scale in all Axis and Linear Roller bearing in all Axis of the Slide Carriage. Electronic measuring equipment: PC electronics with intelligent KELCH EasyVision image processing 17" TFT colour monitor Optional: second 17" TFT monitor for full screen measuring window The CNC Toolsetter is in good condition and ready for immediate use.
Description: Serial number 1290 , Voltage 230 V Frequency 50 to 60 Hz , Power max. 1000 VA Approx. Onsite Dimension. (l x w x h): 1,500 x 900 x 1,700 mm, weight approx.: 200 kg
Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 5x spindle tools -Adjustment: SK50 -different shaft sizes: 22/25/30/40 mm -Price: complete -Weight: 19.2 kg
Tool trolley -SK50 mounts: 10 pcs -Tool trolley: with 5 plastic slots -different cutter heads -different roller milling cutters
Tool holder, milling holder, milling tool -8x recordings: SK50 -5x diameter: 22 x 500 mm -2x diameter: 27 x 500 mm -1x diameter: 32 x 500 mm -Sale: only complete -Weight: 78.6 kg
Tool holder, milling holder, milling tool -7x recordings: SK50 -2x diameter: 27 x 630 mm -2x diameter: 32 x 630 mm -2x diameter: 40 x 630 mm -1x diameter: 50 x 630 mm -Sale: only complete -Weight: 102 kg
Tool holder, milling holder, milling tool -3x recordings: SK50 -1x diameter: 27 x 500 mm -1x diameter: 50 x 335/40 x 164 mm -1x diameter: 60 x 335/40 x 164 mm -with: CNC pull studs -Sale: only complete -Weight: 58 kg
Tool holder, milling holder, milling tool -2x recordings: SK50 -1x diameter: 27 x 300 mm -1x diameter: 32 x 300 mm -Sale: only complete -Weight: 12.8 kg
for milling holders, spindle head -for: assembling and disassembling tool combinations -in: vertical and horizontal arrangement -Admission: SK45 -Weight: 8 kg
Tool holder, milling holder, milling tool -Number: 8x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -is only sold complete -Weight: 26 kg
Tool holder, milling holder, milling tool -10x recordings: SK40 -Adapter -Take: SK40 -Tool holder: MK1 -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Total length: mm -Sale: only complete -Weight: 8.5 kg
Tool holder, milling holder, milling tool -11x recordings: SK40 -Adapter -Take: SK40 -Tool holder: MK2 -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Total length: mm -Sale: only complete -Weight: 9.3 kg
Tool holder, milling holder, milling tool -Number: 17x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -is only sold complete -Weight: 70 kg
Tool holder, milling holder, milling tool -8x recordings: SK40 -Adapter -Take: SK40 -Tool holder: MK3 -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Total length: mm -Sale: only complete -Weight: 9 kg
Tool holder, milling holder, milling tool -Number: 13x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -is only sold complete -Weight: 54 kg
Tool holder, milling holder, milling tool -7x recordings: SK40 -Adapter -Take: SK40 -Tool holder: MK4 -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Total length: mm -Sale: only complete -Weight: 9.4 kg
Tool holder, milling holder, milling tool -Number: 6x SK50 mounts -different designs -Ø 56 x 110 mm -Ø 46 x 130 mm -Ø 52 x 90 mm -Ø 42 x 80 mm -Ø 42 x 55 mm -Ø 32 x 60 mm -Shell end mills -is only sold complete -Weight: 24 kg
Tool holder, milling holder, milling tool -10x recordings: SK40 -6x diameter: 32 x 38 mm -4x diameter: 40 x 40 mm -Sale: only complete -Weight: 15.4 kg
Tool holder, milling holder, milling tool -8x recordings: SK40 -1x diameter: 22 x 14 mm -1x diameter: 27 x 22 mm -4x diameter: 27 x 32 mm -1x diameter: 32 x 25 mm -1x diameter: 40 x 40 mm -Sale: only complete -Weight: 15.4 kg
Tool holder, milling holder, milling tool -7x recordings: SK40 -2x diameter: 22 x 30 mm -1x diameter: 27 x 32 mm -3x diameter: 40 x 40 mm -1x diameter: 40 x 60 mm -Sale: only complete -Weight: 12 kg
Tool holder, milling holder, milling tool -15x recordings: SK40 -Adapter -Take: SK40 -Tool holder: 3x MK1/1x MK2/3x MK3/8x MK4 -Total length: mm -Sale: only complete -Weight: 23 kg
Tool holder, milling holder, milling tool -Number: 21x SK50 mounts -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 82 kg
Tool holder, milling holder, milling tool -Number: 8x SK40 holders -1x: Tapping chuck, compensating chuck -35: Mount MK2, compensating chuck -suitable for: tool changer -Sale: only complete -Weight: 58 kg
Tool holder, milling holder, milling tool, adapter, intermediate sleeve, adapter tool presetting device -Milling holders: Adapter for tool presetting device 7 pieces -Types: HSK 63 HSK 100 SK 40/50 ANSI/CAT see photos -Levy/Price: complete -Total dimensions: 500/300/H170 mm -Weight: 34.4 kg
Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling holders: Adapter intermediate sleeve reducing sleeve SK40 MK2 M16 -Type: 40x2 -Dimension: 60/55/H178 mm -Weight: 0.9 kg
Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling holders: Adapter intermediate sleeve reducing sleeve SK40 MK1 M16 -Type: 40x1 -Dimension: 60/55/H178 mm -Weight: 0.9 kg
Tool holder, milling holder, milling tool -Number: 4x holder SK50 -different designs -Adapter to: MK1/MK3/MK4/MK5 -Sale: only complete -Weight: 11.8 kg
Tool holder, milling holder, milling tool -Number: 9x SK50 mounts -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 34 kg
Tool holder, milling holder, milling tool -Number: 10x SK50 mounts -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 40 kg
Tool carrier for SK 40 holders -made of: polypropylene copolymer -Impact and scratch resistant, insensitive to heat -resistant to: mineral oil and various chemicals -Price: complete
Tool carrier for SK 30 holders -made of: polypropylene copolymer -Impact and scratch resistant, insensitive to heat -resistant to: mineral oil and various chemicals -Price: complete
Tool carrier for TR 20 holders -made of: polypropylene copolymer -Impact and scratch resistant, insensitive to heat -resistant to: mineral oil and various chemicals -Price: complete
Tool holder, milling holder, milling tool -Number: 17x SK50 mounts -Sockets: Ø 22-50 mm -Brill chucks: flat chucks, reducing sleeves, cutter head shell end mill spindle tool -Sale: only complete -Weight: 68 kg
Tool holder, milling holder, milling tool -Number: 17x SK50 mounts -Recordings: MK -Drill chucks: flat chucks, reducing sleeves, cutter head, shell end mill -Sale: only complete -Weight: 68 kg
Tool holder, milling holder, milling tool -Number: 21x SK50 mounts -Sockets: Ø 22-50 mm -Drill chucks: flat chucks, reducing sleeves, cutter head, shell end mill -Sale: only complete -Weight: 90 kg
Tool holder, milling holder, milling tool -Number: 20x SK50 mounts -Sockets: Ø 22-50 mm -Brill chucks: flat chucks, reducing sleeves, cutter head shell end mill spindle tool -Sale: only complete -Weight: 70 kg
Tool holder, milling holder, milling tool -Number: 2x SK40 holders -Adapter -Take: SK40 -1x mounting tool: Ø 13 x 22 mm -1x mounting tool: Ø 27 x 55 mm -suitable for: tool changer -Sale: only complete -Weight: 3.4 kg
Tool holder, milling holder, milling tool -Adjustment: SK50 -Shell end mill: MK5 -Drill chucks: flat chucks, reducing sleeves, cutter head, shell end mill -Weight: 6 kg
Tool holder, milling holder, milling tool -Number: 15x SK50 mount -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 50 kg
Tool holder, milling holder, milling tool -Adapter -Adjustment: SK50 -Tool holder: MK4 -MK4 with tightening thread -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 1x recordings available -Price: per piece -Weight: 4 kg/piece
Tool holder, milling holder, milling tool -Number: 25x SK50 mounts -various: versions -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 100 kg