사용 GEHRING 판매를 위해

번호 : 6549 타입: KS 1800-10 감독자 : 게링 생성: 매개 변수: 호닝 직경: 10mm 가공 길이: 1800mm

honing diameter:63 - 180 mm stroke:15 - 600 mm throat:xxx mm stroke speed:0 - 24 m/min distance table - lower edge spindle:1545 - 2145 mm spindle speeds::24 - 128 1/min. spindle diameter:75 mm feed:EMZ-F/HAZ Do 80 dimensional control:Marposs GCU/AP11 Verticval Honingmachine - machined Cyliner Liner - out of OEM Line. NC Control GEHRING II, Siemens S7-300 SPS 2003 retrofit

honing diameter:90 mm stroke:600 mm ConRod

honing diameter: 40-420 mm stroke: 15-6500 mm centre height: 520 mm workpiece length: 6500 mm workpiece dia.: 1000 mm steady: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 160 mm stroke: 3025 mm centre height: 325 mm workpiece length: 3000 mm workpiece dia.: 600 mm steady: spindle drive: 32-250 U/min stroke speed: 0-20 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 12 mm stroke: 40 mm throat: mm total power requirement: 15 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m 3 spindle honing machine with in process measuring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 80 mm stroke: 280 mm throat: 300 mm total power requirement: 6 kW weight of the machine ca.: 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. Hydraulic infeed of the tool. Switch-off via timer. Air measuring device (probably). Honing oil unit. Various splash shields, etc. Condition : Good. Machine can be in ...

호닝 직경 : 5-10 mm 스트로크 : 40 mm 투영 : mm 총 전력 요구 사항 : kW 기계 무게 약 : t 공간 요구 사항 약 : m 2 스테이션 로터리 테이블 데이터 f & uuml,이 광고는 ModulMWS - LogoTech oHG의 기계 관리로 작성되었습니다.

호닝 직경 : 125mm 스트로크 : 350mm 투영 : mm 총 전력 요구 사항 : kW 기계 중량 약 : t 공간 요구 사항 약 : m 하나의 클램핑 공기 측정 장치에서 사전 및 완성 된 호닝을위한 이중 확장 4 기 통 호닝을위한 장치 공작 기계는 현재 BetrSichV 2015에서 언급 한 기본 안전 및 보호 요구 사항을 충족시키지 못합니다. 필요한 최소 보호 목표의 증가는 BetrSichV에 따른 위험 평가를 통해 결정되어야 합니다. 이 광고의 데이터는 LogoTech oHG의 기계 관리 인 ModulMWS로 작성되었습니다.

호닝 직경 : 24-160 mm 스트로크 : 500 mm 스로트 : mm 총 전력 요구 사항 : kW 기계의 무게 ca : t 기계의 치수 ca : m

Max. spindle rotational speed: 1430/min, spindle power: 1.5kW, connected load: 14kW, including documentation.

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 2.5 mm Max. diameter: 12 mm Max. honing length: 40 mm Number of spindles: 1 Spindle speeds: from: 800 rpm up to: 4000 rpm Total stroke: 4 - 40 mm Stroke speed: from: 10 s/min up to: 450 s/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.75 kW Machine´s weight about: 1700 kg Overall dimensions machine: Length: 2000 mm Width: 1300 mm Height: 2400 mm Various accessories: Coolant system Measuring device

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 2.5 mm Max. diameter: 12 mm Max. honing length: 40 mm Number of spindles: 1 Clamping pressure: 30 bar Spindle speeds: up to: 1600 rpm Total stroke: 4 - 40 mm Stroke speed: from: 10 s/min up to: 450 s/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.75 kW Machine´s weight about: 1700 kg Overall dimensions machine: Length: 2000 mm Width: 1300 mm Height: 2400 mm Various accessories: Coolant system Measuring device Rotary table with 4 positions Déclanchement à deux mains

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 10 mm Max. diameter: 70 mm Max. honing length: 300 mm Spindle speeds: number (steps): 6 from: 50 rpm up to: 1200 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 3.20 kW Machine´s weight about: 2500 kg Overall dimensions machine: Length: 1200 mm Width: 1900 mm Height: 3200 mm Various accessories: Coolant system Set of arbors Set of honing stones

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 12 mm Max. diameter: 45 mm Max. honing length: 250 mm Number of spindles: 1 Distance spindel / columns: 300 mm Table length: 1000 mm Table width: 350 mm Spindle speeds: from: 220 rpm up to: 1030 rpm Total stroke: 350 mm Stroke speed: up to: 1080 m/min Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 1900 kg Overall dimensions machine: Length: 1700 mm Width: 1500 mm Height: 2750 mm Various accessories: Active control

ホーニング直径最大:0 mmホーニング直径最小:0 mm ストローク長:0 mmホーニングヘッド数:0 CNCブランド:0 CNCモデル:0 技術データ 最小直径:25 mm 最大直径:90 mm最大ホーニング長さ:250 mm スピンドル数:1 電圧50 Hz 3x:380ボルト 全体寸法機械:長さ:1400 mm 幅: 1200ミリメートル の高さ:2600ミリメート�