사용 EXNER 판매를 위해

EXNER EXSBR 200 유압 프레스 욜 8/1987 일련 번호 10042 압력 200 t 표 1800 x 800 mm 전력 요구 사항 65 kW 안전 거리 195 mm 오버트래블 52 mm 실행 시간 120ms 무게 약 23 t

유압 4 컬럼 프레스 Exner, 유형 H4 SP 450, YOC 1983, 압력 450 to., seitl. 통로 475 mm. 설치 높이 600 mm, 테이블 표면 1100 x 850 mm, 플런저 영역 300 mm ø, 스트로크 200 mm. 치수 3100mm x 2100 mm, 깊이 1,980 mm. 무게 13 to. ]

pressure:150 t distance between columns:300 mm stroke:180 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:570x180 / 300x410 mm table height over floor:875 mm side window:180 mm ram surface:180 mm speed down:250 mm/s speed up:160 mm/s working speed:6 - 12 mm/s oil volume:250 l power requirement:11,0 kW weight:2,4 t dimensions (WxDxH):1,3 x 1,3 x 2,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 foundation pit:nicht erforderlich

pressure:40 t distance between columns:495 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:490 x 400 mm hole in the table:50 mm table height over floor:950 mm side window:155 mm ram surface:150 mm speed down:480 mm/s speed up:480 mm/s working speed:20 mm/s oil volume:115 l power requirement:7,5 kW weight:2,2 t dimensions (WxDxH):1,35 x 1,1 x 2,2 m depth stop:mechanisch foundation pit:nicht erforderlich

pressure:40 t distance between columns:500 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:480 x 400 mm hole in the table:50 mm table height over floor:950 mm side window:150 mm ram surface:150 mm speed down:480 mm/s speed up:480 mm/s working speed:20 mm/s oil volume:160 l power requirement:7,5 kW weight:2,6 t dimensions (WxDxH):1,1 x 1,4 x 2,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick depth stop:mechanical foundation pit:not necessary

pressure: 125 t distance between columns: 1500 / 460 mm stroke: 400 mm total power requirement: 15 kW weight of the machine ca.: 10 t dayligth: 800 mm table surface area: 1900x870 mm ram surface: 1900x870 mm working feed: 0-10 mm/sec return speed: 0-20 mm/sec dimensions: BxTxH 2400x1500x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

압력: 60 t 목구멍: 330 mm 치기: 500 mm 테이블 표면적: 640x640 mm 램 표면: 120 mm 테이블 높이: 램에 있는 850 mm 공구 구멍: 기계의 50 mm 무게: 7 t

press ram:: ram head width: 2.100 mm depth: 840 mm stroke: 350 mm Control: EXNER Guide way length: 750 mm nominal pressure: 2x 400 kN return capacity: 2x 150 kN ram stroke speed - under load: 100%: ca. 0 - 10 mm/s ram stroke speed: ca. 0 - 20 mm/s T-slot - width: 18 mm T-slot - distance: 150 mm Installation Space:: dayligth: 550 mm table surface area: 1.600 x 840 mm T-slot - width: 18 mm T-slot - distance: 90 mm dist. between pillars (left to right): 1.700 mm dist. between pillars (front to rear): 600 mm table height over floor: 1.300 mm total power requirement: 11 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 2,5 x 2,0 x 3,7 m Hydraulic tool testing press EXNER - PG 80 - very good condition - approx. 300 operating hours - Electronic roller feed device EV 22 AK incl. Bandwidth: max. 220 mm Band cross section: max. 200 mm² Feed length: 0.1 x 19,999 mm Speed: ...

압력: 200 T 컬럼 간 거리: - mm 스트로크: - mm 테이블 표면적: 2000 x 800 mm 총 전력 요구 사항: kW 기계의 무게 ca.: 31 t 기계의 치수 ca.: m 구동력 55 / 4 kW 트래킹 트래킹 트래블 28 mm 안전 거리 155 mm 추적 이동 시간 97 ms 오일 충전 1200 리터

pressure: 200 t passage width: NA mm stroke: 180 mm table length: 690 mm table width: 530 mm distance between columns: 420 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m Hydr. 4-Pillar Press for Embossing/Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

압력: 20 t 스로트: 185 mm 스트로크: 100 mm 테이블 표면적: 380 x 350 mm dayligth: 250 mm 바닥 위 테이블 높이: 840 mm 총 소요 전력: 4 kW 기계 중량 ca.: 1,3 t