사용 CHARMILLES 판매를 위해

Inv. 번호 : 7280 유형: FORM 2-LC ZNC 감독 : Charmilles 생성:- 매개 변수: 테이블 치수: 500x400mm X축의 최대 이동 거리: 300 mm Y축의 최대 이동 거리: 200 mm Z축의 최대 이동 거리: 200 mm 컨테이너 크기: 820x500mm

전화번호 : 5896 유형: Roboform 54P 감독 : Charmilles 생성 연도: 2002 매개 변수: 테이블 치수: 750x500 mm 최대 작동 전류: 64A X축의 최대 이동 길이: 600mm Y축의 최대 이동 길이: 400mm Z축의 최대 이동 길이: 450mm 콘테이너 차원: 1200x775x385 mm 기계 무게: 3000 kg 설비: 공구 교환장치 C축

전화번호 : 5897 유형: Roboform 54P 감독 : Charmilles 생성 연도: 2000 매개 변수: 테이블 치수: 750x500 mm 최대 작동 전류: 64A X축의 최대 이동 길이: 600mm Y축의 최대 이동 길이: 400mm Z축의 최대 이동 길이: 450mm 콘테이너 차원: 1200x775x385 mm 기계 무게: 3000 kg 새 소스

유형: 거푸집 침몰 EDM 기계 모델 번호: U022409 범주: 다이 싱킹 EDM 기계 / EDM 제조사: Charmilles 모델: ROBOFORM 350 GammaTec 건축 년도: 2006 이동 거리: 350 x 250 x 300 mm [ X x Y x Z ] 테이블 크기 X: 500mm 테이블 크기 Y: 400 mm 최대 워크피스 무게: 500 kg 전극 교환기: 16단 C축

유형: 거푸집 침몰 EDM 기계 모델 번호: U022607 범주: 다이 싱킹 EDM 기계 / EDM 제조사: Charmilles 모델: ROBOFORM 35P 건축 년도: 2002 이동 거리: 350 x 250 x 300 mm [ X x Y x Z ] 테이블 크기 X: 500mm 테이블 크기 Y: 400 mm 최대 공작물 크기 X: 780 mm 최대 워크피스 크기 Y: 400 mm 최대 워크피스 크기 Z: 300 mm 최대 워크피스 무게: 500 kg 최대 전극 무게: 50kg 툴 체인저: 16단 C축 발전기: 64 암페어 lowerable 콘테이너 Erowa ITS50 클램핑 헤드

컨트롤 FJ.37X X/Y/Z 이동 거리 450/320/162 mm 이동 거리 U/V +/- 50 mm 워크피스 크기 X/Y/Z 1100/760/360 mm 테이블 하중 500kg 무게 3200 kg 와이어 가이드 ø0.25 및 ø0.30 EROWA 장력 빔용 베이스 스트립 와이어 정렬 블록 와이어 스레딩 모듈

일반: 건축 년도: 1998 이동 거리: X 350 mm, Y 250 mm, Z: 300 mm 테이블 크기 500 x 400 mm 공작물 치수 최대 500kg 중량 약 2,350 kg 다른 장비 및 포함된 액세서리: 공구 교환장치 공구 홀더 시스템 3R

상표: 샤밀 년도 : 1998 모델: 로보폼 810 응용 프로그램 유형: EDM 지역: 포르투갈 기계 유형: 침식 기계 가용성: 즉시 제어 장치 브랜드: 샤밀 긴두맥 아이디: PT-EDM-CHA-1998-00001 기술 정보 일반 데이터 측정 폭: 3950 MM 측정 깊이: 3550 MM 측정 높이: 2960 MM 기계 무게 : 5300 KG 제어 장치 상표: 샤밀 메인 드라이브 축선의 수: 4 움직임 X 축 이동 : 800MM Y 축 이동: 600MM Z 축 이동 : 500MM 추가 정보 기계 이점 기술 기계 이점: 최대 .PART 크기 : 1500 X 1000 X 500 MM 최대 무게 부분 : 4200KG 유전체 볼륨 : 1600 L C 축 : 예 공구 챈저 : 24 척 : 3 R 정성적 기계 이점: - 우수한 상태의 기계 -단장�

Cross table controlled, cross slide table, clamping table, clamping plate with T-slots, clamping angle -Transfer: in the current condition as seen -Y axis: measuring rail is defective -Cross table: comes from an erosion machine -Table surface: 450 x 340 mm -Travel: X 280 mm/Y 170 mm -Dimensions: 1000/1130/H950 mm -Weight: 728 kg

Connected load: 5kVA, weight: 2.5t, the machine is defective, the cable of the C-axis motor is defective, an on-site inspection is possible.

Max. workpiece weight: 800kg, weight: 3.34t, with generator, the PC of the machine is defective, an on-site inspection is possible.

Machining paths X/Y/Z: 350mm/220mm/220mm, table dimensions X/Y: 680mm/450mm. max. workpiece weight: 750kg, max. workpiece dimensions X/Y/Z: 1000mm/550mm/250mm. Wire diameter range: 0.1mm-0.3mm, wire spool size: 8kg, skewing capacity: 0°-30°. Dimensions X/Y/Z: 2020mm/2050mm/2000mm, weight: approx. 2500kg, operating hours: approx. 60000.

This CHARMILLES ROBOFORM 55P Erosion machine was manufactured in the year 2003 in the United States. It has 3 axis and work table size of 495 x 749 mm.

This Charmilles Roboform 31 Erosion machine was manufactured in the year 1996 in Switzerland.

This CHARMILLES ROBOFORM 51 Erosion machine was made in 1998. The machine has a table size of 750x500 mm.

This CHARMILLES ROBOFORM 50 Erosion machine was manufactured in the year 1999. The machine has a table size of 500x400 mm. 2 units are available.

This CHARMILLES Robofil 2020 SI Erosion Machine was made in 1996 in Switzerland. It has been working for approximately 73000 hours. It operates in solid conditions without any problems and can be inspected under production. In the delivery scope all standard accessories are available (except clamping devices). For more information see PDF attached.

This Charmilles HD30CNC Erosion machine was manufactured in the year 2006.

-First commissioning in 1985; Attention! There is a defect on the changer, C-axis shows temporary errors; -Technical information without guarantee; -X-axis: 320mm; -Y-axis: 220mm; -Z-axis: 320mm; -C-axis: 360°; -Working surface: 560x400mm; -Workpiece weight: 500kg; -Usable area: 880x550mm; -Control: Charmilles; -Weight approx. 4500 kg; -Dimensions (LxWxH) approx. 3000 x 1610 x 2460 mm; -We offer this machine as a spare parts donor.

Die Sinking Machine CHARMILES ROBOFORM 54P - C axis, automatic electrode change, Erowa, Information about technical data are not binding., Machine available subject to prior sale., Longitudinal travel x axis: 600 mm, Cross travel y axis: 400 mm, Vertical travel z axis: 450 mm, C axis travel: 360 °, Working table size: 750x500 mm, Work tank dimension: 1200x800x460 mm, Automatic electrode change nr.: 16, Power supply: Charmilles, Max working current: 64 A, Filter type: Cartridge paper, Weight: 3.600 Kg, Accessories: EROWA Sistem

CHARMILLES ROBOFORM 550 - 2005 다이 싱킹 EDM 기�

샤밀 양식 20 매뉴얼 - 1990 다이 싱킹 EDM 기�

Machine is in good condition X : 350 mm Y : 250 mm Z : 350 mm

Die sinking EDM machine Make Charmilles type Roboform 51 built in 1999 X600 Y400 Z450 table 750 x 500 mm Max workpiece weight 1000 kg very well-kept condition machine plugged in, can be checked

Charmilles Robofil 310 CNC type Year: 1994 X axis Axis shift of 400 mm Axis Y axis shift 250 mm Z-axis travel 400 mm The stroke of the U axis is 400 mm The stroke of the V-axis 250 mm We attach 8 cartons of brass wire 0.25 and all the instructions including one in Polish

Charmilles Robofil 4020 Year 1996 Travel: X-450, Y-320, Z-270, U-100, V-100 Max cutting angle: 30 degrees Max workpiece weight: 500 kg Programmable axes: X, Y, Z, U, V Max dimensions of the detal - 990 x 505 x 270

Fanuc CNC model Automatic threading yes Immersion EDM type Maximum wire inclination +/- 30° 400mm X Axis Travel 400 mm Y Axis travel 300 mm Z Axis travel 400 mm U Axis travel 500 mm V Axis travel 400 mm Maximum piece dimensions 900 x 600 x 400 mm Max piece weight 1000 kg

table dimensions 450x350 mm X, Y, Z axis travel 270x170x200 mm weight 300 kg

Charmilles 31 EDM Wire Cutting Machine Machine is in good working condition

Charmilles D10 EDM sinking machine it is equipped with an Isocut E20 head, an Isopulse 80 generator with Microfin and an X and Y Iskra visualization. the machine works and is in very good general condition but has a problem with the hydraulic descent regulator, the machine has difficulty descending (this is a known problem on these machines) but it is surely repairable. the machine is supplied complete ready to use, with numerous tool holders + electrodes of all types and with the original documentation.

Charmilles Robifil 640 CC EDM Wire Cutting Machine X : 800 mm Y : 550 mm Z : 510 mm

The machine has been standing still for a couple of years now, so it needs a complete overhaul, it is not possible to see it in operation. - tank dimensions: 1105 x 765 x 435 [mm] - maxi dimensions of the pieces: 1100 x 760 x 360 [mm] - maxi piece weight: 800 [kg] - strokes: X x Y x Z: 450 x 320 x 162 [mm] - U strokes: +/- 50 [mm] - V strokes: +/- 50 [mm] - solution: 1 [µm] - wire unwinding speed: 2 - 15 [m / min] - rake angle: +/- 30 ° - tank dimensions: 1150 x 900 x 2280 [mm] - tank capacity: 1000 [l] - dimensions: 3700 x 2700 x 2300 - weight: 4930 [kg]

Charmilles Robofil 440 SL EDM Wire Cutting Machine X : 550 mm Y : 350 mm Z : 400 mm

CHARMILLES Type P25 die-sinking EDM Die-sinking EDM. never used. The car turns on

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Table length: 800 mm Table width: 560 mm Table load max.: 800 kg Longitudinal traverse (X-axis): 450 mm Cross traverse (Y-axis): 320 mm Max. distance from the table and sleeve: 640 mm Working vessel:length inside: 1195 mm Width: 800 mm Height: 410 mm Working head: way rapid feed (Z): 410 mm Dielectric aggregate: Contents: 560 l Height: 870 mm Width: 2110 mm depth: 750 mm net weight: 300 kp Generator: Power: 128 A Height: 2100 mm Width: 650 mm depth: 600 mm Total power required: 7.0 kVA Operating voltage: 380 Volt Machine´s weight about: 320 kg Machine´s weight about: 4100 kg Overall dimensions machine: Length: 3700 mm Width: 2110 mm Height: 2700 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Table length: 750 mm Table width: 600 mm Dimension of the workpice: Length: 1200 mm Width: 850 mm Height: 400 mm Table load max.: 1600 kg Longitudinal traverse (X-axis): 600 mm Cross traverse (Y-axis): 400 mm Height adjustment (Z-axis): 450 mm max. electrode weight: 100 kg Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 4500 kg Overall dimensions machine: Length: 3150 mm Width: 2750 mm Height: 2960 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Table length: 500 mm Table width: 400 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 250 mm Max. distance from the table and sleeve: 150/450 mm Working vessel:length inside: 800 mm Width: 550 mm Height: 370 mm Working head: way rapid feed (Z): 300 mm max. electrode weight: 50 kg Dielectric aggregate: Contents: 410 l Generator: Power: 64 A Total power required: 7.5 kVA Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 1900 mm Width: 1690 mm Height: 2800 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 500 mm Table width: 400 mm Number of spline: 3 T-channel width: 12 mm Distance of the T-slots: 125 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 250 mm Height adjustment (Z-axis): 300 mm Working vessel:length inside: 800 mm Width: 550 mm Height: 370 mm Dielectric aggregate: Contents: 450 l Total power required: 5 kVA Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3300 mm Width: 2400 mm Height: 2480 mm Various accessories: Loading roboter: Type: QCRi Pallet positions: 8 Holder: 54 Fire extinguishing system (without bottle) Interface serial port RS 232 Lamp

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Operating hours: 171812 Technical data Working table: Length: 950 mm Width: 620 mm Max. dimensions of work piece: Length: 1260 mm Width: 690 mm Height: 360 mm Table load max.: 800 kg Longitudinal traverse (X-axis): 630 mm Cross traverse (Y-axis): 400 mm Vertical travel (Z axis): 160 mm U/V axis travel: +/-48 mm Resolution: 0.05 µm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.05 mm up to: 0.33 mm Dielectric aggregate: Contents: 240 l Voltage 50 Hz 3x: 400 Volt Total power required: 15 kVA Machine´s weight about: 4100 kg Overall dimensions machine: Length: 2660 mm Width: 2610 mm Height: 2370 mm Various accessories: CNC control Automatic wire treading

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Working table: Length: 560 mm Width: 440 mm Max. dimensions of work piece: Length: 1130 mm Width: 510 mm Height: 260 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 318 mm Cross traverse (Y-axis): 218 mm Vertical travel (Z axis): 114 mm U axis: +/-48 mm V-axis: +/-48 mm U/V axis travel: 48 mm Taper-cut +/-: 30/65mm ° Diameter of electrode wire: from: 0.1 mm up to: 0.25 mm Forward feed for wire elctrode: from: 0.2 m/min up to: 15 m/min Max. coil weigth: 16 kg Dielectric aggregate: Empty weight: 4400 kg Contents: 240 l Generator: Cut capacity max. from: 300 mm2/min Voltage 50 Hz 3x: 380 Volt Total power required: 12 kVA Weight total installation approx.: 4500 kg Overall dimensions machine: Length: 3700 mm Width: 2600 mm Height: 2300 mm Variou ...

縦方向X:0ミリメートルクロスY:0ミリメートル 垂直Z:0ミリメートル アンペア:0 A CNC ブランド:0 CNCモデル:0 技術データ ワークピースの最大寸法:長さ:900ミリメートル幅:520� ��リメートル 高さ:270ミリメートルテーブル荷重最大: 500キロ 縦方向トラバース(X軸):320ミリメートルクロストラバ ース(Y軸):220ミリメートル 垂直移動(Z軸): 270 mm テーパーカット +/-: 30 電極ワイヤの直径: から: 0.25 mm まで: 0.30 mm 全体寸法 機械: 長さ: 3400 mm 幅: 2400 mm 高さ: 2300 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Working table: Length: 900 mm Width: 600 mm Max. dimensions of work piece: Length: 1200 mm Width: 700 mm Height: 400 mm Table load max.: 1500 kg Longitudinal traverse (X-axis): 550 mm Cross traverse (Y-axis): 350 mm Vertical travel (Z axis): 400 mm Taper-cut +/-: 30 /400mm ° Diameter of electrode wire: from: 0.33 mm up to: 0.10 mm Dielectric aggregate: Contents: 1200 l Air connect: 6 - 7 bar Voltage 50 Hz 3x: 400 Volt Total power required: 10 kVA Weight total installation approx.: 2850 kg Overall dimensions machine: Length: 2810 mm Width: 2600 mm Height: 2080 mm Various accessories: Cooling unit for fluttines: HITEMA

縦方向 X: 0 mm クロス Y: 0 mm 垂直 Z: 0 mm アンペア: 0 A マッハID     4003 チャーミルを作る          タイプ          ロボフォーム200 1990年(         平成2年 ) 寸法 長さ    3000ミリメートル 幅     1600ミリメートル 高さ    2500ミリメートル

縦方向 X: 0 mm クロス Y: 0 mm 垂直 Z: 0 mm アンペア: 0 A 位置 ATC: 0 タンク内容物: 0 MACH-id   4000 メルク   ・シャルミレス タイプ     ロボフォーム31 1996年(平成8年      )