사용 BIANCO 판매를 위해

사양: 반자동 철 톱질 기계 비스듬한 절단 설치된 힘: 1.5 KW 다음으로 완료 : -부 - 밀리미터 스케일 -시각화 도우미 - 공작물 클램프 - 블레이드 클리너 ● 냉각수 펌프 - 입구 및 출구 롤러 mm: 2,000 + 3,000

화이트 브랜드 톱질 기계 모드. 360 CNC 연도 2010 2019 개정

기술 데이터: 세가 비앙코 모드. 350 문서화되지 않은

total power requirement:380V 50 HZ,1,67 kW dimensions of the machine ca.:1,4 x 1,8 x 1,4 m

cutting diameter: 280 mm saw band length: 3120 mm tong feed: 600 mm work height max.: 835 mm dimensions of saw-band: 3120 x 27 x 0,9 mm : 280 mm Capacity 90° rectangular: 330 x 240 mm : 240 x 240 mm : 225 mm : 215 x 215 mm : 230 x 140 mm capacity 60 degrees: round: 140 mm capacity 60 degrees: square: 140 x 130 mm capacity 60 degrees: flat: 140 x 130 mm band speed: 20 - 100 m/min total power requirement: 1,5 kW weight of the machine ca.: 700 kg dimensions of the machine ca.: 2,6 x 1,75 x 1,7 m Fully automatic metal band saw with high cutting accuracy. At this Machine are 90 ° cuts, as well as miter cuts on one side up to 45 °, continuously possible. In the manual workflow up to 30 ° (swivel range 60 °). Workflow: After entering the required number of pieces and the cut length on the control panelthe fully automatic work cycle is started. Basic equipment: - CNC control, storage of up  ...

cutting diameter: 300 mm saw band length: 3270 x 27 x 0,9 mm cutting width: 420 mm feed per cut: 800 mm band speed: 35-70 m/min quick change toolholder: 300 capacity 90 degrees: square: 240 x 240 mm Capacity 90° rectangular: 420 x 200 mm : 240 mm : 230 mm Capacity 45° rectangular: 270 x 140 mm capacity 60 degrees: round: 165 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170 x 170 mm total power requirement: 0,9-1,5 kW weight of the machine ca.: 1090 kg dimensions of the machine ca.: 2800 2050 x 1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 330 mm saw band length: 3010x27x0,9 mm cutting width: 330 mm work height max.: 830 mm band speed: 35/70 m/min Capacity 90° rectangular: 330x140 mm capacity 90 degrees: round: 260 mm capacity 45 degrees: round: 200 mm : 120 mm : 190x190 mm total power requirement: 1,8 kW weight of the machine ca.: 0,400 t dimensions of the machine ca.: 1,50 x 1,39 x 1,79 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 6250 : März 2024, Zwischenverkau : Italien : 15040 € : 308.32 € : Doppelsäulenführung : 3270x27x0,9 mm : 40/80 m/min : 300 mm : 300 mm : 350x260 mm : rund 210 mm, quadrat 210 : rund 110 mm, quadrat 110 : 830 mm : 1.5 kW : 1500 mm : 1600 mm : 1900 mm : 590 kg hydraulicvice INCL. ADJUSTABLE CLAMPING PRESSURE saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. The data for this ad was created with Mo ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 8300 € : 171.81 € : Schwenkrahmen : 3010x27x0,9 mm : 35/70 m/min : 260 mm : 240 mm : 330x120 mm : rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm : 1500 mm : 1400 mm : 1850 mm : 345 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10460 € : 214.43 € : Schwenkrahmen : 3010x27x0,9 mm : 35/70 m/min : 260 mm : 240 mm : 330x120 mm : rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm : 1600 mm : 1200 mm : 1800 mm : 390 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. Option: Adjustable vice pressure (R1) EUR 403,-- The data for this ad was created with ModulMWS - the softw ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 19280 € : 395.24 € : Schwenkrahmen : 3120x27x0,9 mm : 35/70 (PLC) m/min : 20-100 (CNC/Touch) m/min : 280 mm : 240 mm : 330x240 mm : rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 220 mm : 835 mm : 0.12 kW : 0.37 kW : 2800 mm : 2050 mm : 1900 mm : 1090 kg VERSION PLC: adjustmen of material feed by handwheel, counter and limit switch VERSION CNC:feed lenght and numbers by CNC (99 progamms) VERSION TOUCH: as CNC but with 7", touchscreen for easier operation automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed 600 mm/stroke variable cutting pressure machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch) collant equipment automatic saw blade breakage detection hydraulic clamping vices material chute suggested max.  ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 12680 € : 259.94 € : Schwenkrahmen : 3120x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 350x140 mm : rund 230 mm, quadrat 200 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 830 mm : 1600 mm : 1550 mm : 1750 mm : 460 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. The data for this ad was created with ModulMWS - the software solution of LogoT ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 11070 € : 226.94 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 420x200 mm : rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm : 1600 mm : 1400 mm : 1800 mm : 438 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10860 € : 222.63 € : Schwenkrahmen : 3120x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 370x140 mm : rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 830 mm : 1650 mm : 1200 mm : 1850 mm : 390 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10370 € : 212.59 € : Schwenkrahmen : 3120 mm : 35/70 m/min : 280 mm : 240 mm : 350x140 mm : rund 230 mm, quadrat 200 : rund 150 mm, quadrat 130 : rund 200 mm, quadrat 170 : 830 mm : 1550 mm : 1400 mm : 1750 mm : 420 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment digital readout for mitre cuts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 8680 € : 179.68 € : Schwenkrahmen : 3120x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 370x140 mm : rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 830 mm : 1550 mm : 1400 mm : 1900 mm : 353 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 9420 € : 194.99 € : Schwenkrahmen : 2450x20x0,9 mm : 35/70 m/min : 220 mm : 200 mm : 250x150 mm : rund 160 mm, quadrat 140 : rund 90 mm, quadrat 90 mm : 800 mm : 0.7 kW : 1330 mm : 1300 mm : 1880 mm : 350 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent utomatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. OPTION: Adjustable vice pressure (R1) EUR 403,-- The data for this ad was created with ModulMWS - th ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 11640 € : 238.62 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 300 mm : 240 mm : 420x200 mm : rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm : 1650 mm : 1200 mm : 1900 mm : 400 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. Optional equipmente: adjustable vice pressure EUR 330,-- The data for this ad was created with ModulMWS - t ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 9080 € : 187.96 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 300 mm : 240 mm : 420x200 mm : rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm : 1600 mm : 1400 mm : 1950 mm : 356 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 6242 : prompt, Zwischenverkauf v : Italien : 6730 € : 139.31 € : 1 : Schwenkrahmen : 2450x27x0,9 mm : 35/70 m/min : 220 mm : 220 mm : 260x140 mm : rund 160 mm, quadrat 155 : rund 95 mm, quadrat 95 mm : 965 mm : 1200 mm : 1100 mm : 1860 mm : 240 kg DEMO MACHINE manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 17700 € : 362.85 € : Schwenkrahmen : 3010x27x0,9 mm : 35/70 (PLC) m/min : 20-100 (CNC/Touch) m/min : 260 mm : 240 mm : 330x120 mm : rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 220 mm : 835 mm : 0.12 kW : 0.37 kW : 2800 mm : 2050 mm : 1900 mm : 1090 kg VERSION PLC: adjustment of material feed by handwheel, counter and limit switch VERSION CNC:feed lenght and numbers by CNC (99 progamms) VERSION TOUCH: as CNC but with 7", touchscreen for easier operation automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed: PLC 800 mm/stroke, CNC/Touch: 600 mm/stroke variable cutting pressure. Machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch) cutting fluid system automatic saw blade breakage detection hydraulic vices mat ...

: neu : 2023 : 6240 : prompt, Zwischenverkauf v : Italien : 20490 € : 420.05 € : 1 : Schwenkrahmen : 3010x27x0,9 mm : 20-100 m/min : 260 mm : 240 mm : 330x120 mm : rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 220 mm : 835 mm : 1.5 kW : 2800 mm : 2050 mm : 1900 mm : 1090 kg material feed andnumber of pieces by CNC (99 programms) automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed 600 mm/stroke variable cutting pressure variable cutting speed coolant equipment automatic saw blade breakage detection hydraulic vices for material clamping while cutting and for feeder unit user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 25680 € : 521.3 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 (PLC) m/min : 20-100 (CNC/Touch) m/min : 300 mm : 240 mm : 420x200 mm : rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 220 mm : 835 mm : 0.12 kW : 0.37 kW : 3220 mm : 2050 mm : 1900 mm : 1090 kg VERSION PLC: adjustment of material feed by handwheel, counter and limit switch VERSION CNC:feed lenght and numbers by CNC (99 progamms) VERSION TOUCH: as CNC but with 7", touchscreen for easier operation automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed 800 mm/stroke chip conveyer (CNC/Touch) variable cutting pressure Machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch) cutting fluid system automatic saw blade breakage detection hydraulic vices suggested  ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 45210 € : 917.76 € : Schwenkrahmen : 3120x27x0,9 mm : 20-100 m/min : 280 mm : 240 mm : 310x240 mm : rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm : 835 mm : 0.12 kW : 0.37 kW : 1.5 kW : 1.95 Nm : 1.95 Nm : 2800 mm : 2000 mm : 1820 mm : 1200 kg CNC control with 7", touchscreen for following functions: feeding length, pieces and rotation of the bow for mitre cutting automatic feed 1000 mm / stroke variable cutting pressure machine with speed variator coolante equipment motorizes chip brush chip conveyer automatic saw blade breakage detection hydraulic clamping vices material chute user manual in English or German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 14110 € : 289.26 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 420x200 mm : rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm : 1600 mm : 1600 mm : 1800 mm : 488 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. The data for this ad was created with ModulMWS - the software solution of LogoT ...

I am selling a band saw Bianco MOD330 AUT. Year of manufacture 2016

Automatic band sawing machine with bow movement, vices and hydraulically controlled advancement. Blade descent and ascent controlled by feeler. Cutting progress with infinitesimal adjustment. Manual setting of the cutting length via handwheel, quantity of pieces to be cut and machine functions managed by PLC. Mechanical blade tensioning controlled by limit switches. The machine is complete with protective casing, double safety button for starting the cycle and low voltage electrical system according to CE regulations. Cutting capacity Round + 90° 280 mm + 60° 140 mm + 45° 225 mm Painting + 90° 240 mm + 60° 140 mm + 45° 215 mm Dish + 90° 330 x 240 mm + 60° 140 x 130 mm + 45° 230 x 140 mm Cutting speed 35 – 70 m/min Work surface height 835 mm Blade motor 0.9 – 1.5 kW (V400) Hydraulic control unit motor 0.37 kW Coolant pump motor 0.12 kW Ca ...