| 묘사: |
PET bottles crusher BOREMA Umwelttechnik AG R-1200F
중고 기계
We offer you a used PET bottle crusher of the manufacturer BOREMA,
type R-1200 F, year of construction 2013, for residual emptying,
deaeration and pre-compaction of the fed PET bottles, from 0.3 up to
2.5 l content. The machine has a chassis and can be moved into and out
of the feed chute of your baler. The machine has a throughput capacity
of approx. 85,000 bottles/h, corresponding to approx.
3t/h.
We have the following technical
information:
Manufacturer: BOREMA Umwelttecjhnik AG
Type:
R-1200 F (with trolley for retracting and extending)
Year of
manufacture: 2013
Drive power: 11 kW
Connected load: 15
kW
Rated current: 32 A
Back-up fuse: 40 A
Type of
construction: Continuous system
Function: Double rotor press
system
Rotor pretension pneumatic: approx. 16t
Overload
protection: by anti-blocking system
Input material: PET disposable
and returnable empty bottles 0.3 to 2.5 L capacity
Input material:
HDPE bottles and canisters up to 3 l capacity
Throughput capacity:
approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour,
depending on size
Required compressed air output: G1/2, 8 bar, 40
l/min.
Compression ratio: 1:3
Flange dimensions inside: 972 x
1220 mm
Feed opening: 565 x 1280mm
Weight: approx.
2500kg
Possible applications:
Due to the chassis, the PET
flattener can be moved into the feed chute of your baler as required,
thus ensuring residual emptying, venting and pre-compaction of the fed
bottles and canisters. When the material is changed, the PET flattener
is simply moved out of the feed chute again and paper, cardboard,
film, etc. can now be pressed further without using the flattener.
Process of the BOREMA PET crusher:
The plastic packages
are drawn in by two rotating shafts. One of the rotating shafts is
pneumatically pretensioned by two air bellows and presses the PET
bottles with 16 t of pressure against the second rotating shaft. In
the process, the closed plastic bottle is squeezed together, caused to
burst and vented. Residual liquids run out and the material falls into
the baler in a precompressed state. When impurities are introduced,
the pneumatically pre-tensioned shaft deflects to the side and the
impurities are channeled through.
Significant advantages
compared to conventional PET perforators with punching mandrels or
knives:
The BOREMA process is much more efficient and less subject
to wear than conventional O651246 PET perforators with punching
mandrels or knives. The biggest advantage is that any foreign matter
such as metal parts, stones, bottles with frozen contents and pieces
of wood are passed through the pneumatically deflecting rotor shaft
without stopping the operation of the system or causing any major
damage. With conventional perforators, mandrels or blades sometimes
break off or become so jammed with the interfering material that the
plant has to be shut down and repaired at great
expense.
Comments:
The crusher is in good condition, was
dismantled from the running operation, stored, is available at short
notice and after assembly immediately ready for use. The
documentation (manual, CE, electrical/hydraulic circuit diagram) is
complete. An inspection is possible by arrangement. The technical
information is taken from sales brochures, the operating instructions
or other information provided by the manufacturer. We accept no
liability for incomplete or incorrect data and informations.
seller
offer No. resale BOREMA_PET_bottles_crusher_R-1200F
|