코멕 컨베이어 벨트 상표: 혜성 A.A 길이 = 10,000 mm 벨트 폭: 500 mm 드라이브 : 기어 박스가있는 전기 모터 A.A 길이 = 5700 mm 벨트 폭: 650 mm 드라이브 : 기어 박스가있는 전기 모터
중고 뮤티플 수평 장붓 구멍 COMEC 모드. MMS/15-2000-CA - 자동 로더 - 최대 작동 길이 mm. 2000 - 7번 스핀들 - 볼트 380/50 - S/N 970406 - CE 규칙 (1997 년)
Comec, 모델 MM-12에 의해 만들어진 중고 밀. 새로운 2014. 무게 650 kg, 12 L, 30 kW, 6 바, CE, Eex dIIB T4. 제어판.
1987년, CAP: 75,000T/연, 스트립 폭: 250 - 1300 MM, 두께: 0.2 - 2.0 MM, 코일 무게: 10 T, 시트 길이: 최대 4.0 M, 2 번째 라인 : 캡 : 30,000 T / 연, 스트립 너비 : 700-1300 MM, 두께 : 0.3-3.0 MM; 코일 무게: 10T, 시트 길이: 4.0M, 속도: 20M/분,
중고 보링 및 엔드 커팅 머신 COMEC 모드. FIMOV 2500 2UT + 2UF + CA2 - N. 2 틸팅 커팅 유닛 - N. 수직 보링 유닛 2개 - 맥시 작업 길이 250cm - 자동 로더 포함 - 주변 안전망 - S/N 021132 - CE (2002년)
접이식 벤치가 있는 중고 클램프 COMEC MOD입니다. SPL/3R - CE 표준 - 최대 테이블 경사 30° - 최대 작동 치수 1350x780 mm - N. 3 유압 실린더 유압 장치 5.5 마력 - CE 규칙 - 1995년 -볼트. 380/50 - S/W 950304
중고 양면 절단 톱 COMEC MOD. TD1200 - CE 규칙 - N.2 모터 2 HP - N. 2 블레이드 직경 350 mm - 최소/최대 작업 길이 220/1200 mm - 절단 성향 : 수평 +/- 35 °; 수직 +/- 35° -볼트. 380/50 - SN 961227 - 년 1996
중고 양면 절단 톱 COMEC MOD. TD1200 - CE 규칙 - N.2 모터 2 HP - N. 2 블레이드 직경 350 mm - 최소/최대 작업 길이 220/1200 mm - 절단 성향 : 수평 +/- 35 °; 수직 +/- 35° -볼트. 380/50 - 1995년
중고 궤도 샌더 COMEC LC/20/AV - CE 규칙 - 최소/최대 직경 10/160mm - 급지 장치 포함 -볼트. 400/80 - SN 010118 - 2001년
중고 수평 수직 모르티저 COMC MOD. 이동12X - 4+4 수평 스핀들 - 3+3 수직 스핀들 - 최소/최대 스핀들 중심 거리 85/1000mm. - N.2 로더(오른쪽 및 왼쪽) - 수평 스핀들의 최대 기울기 ±20° - 최대 수직 스핀들 기울기 +30°/-10° - 잠금 벤치의 기울기 0/-20° - 스핀들 최소 축간 85 mm - 스핀들 최대 축간 1000 mm - 최대 장모 길이 100 mm - 최대 장모 구멍 깊이 50mm -볼트. 380/50 - SN 962135 - CE 규칙 (1996 년)
오비탈 샌더 Comec LC/15AV 요소 직경 최소/최대 10-100mm 4kw 주발동기 2×0.25kw 피드 모터 샌딩 벨트 치수 1220x70mm CE 인증
오비탈 샌더 Comec LC/15AV 요소 직경 최소/최대 10-100mm 4kw 주발동기 2×0.25kw 피드 모터 샌딩 벨트 치수 1220x70mm CE 인증
연속 COMEC TD2400 + CA로 득점하지 않고 이중 마이터 쏘를 판매합니다. 작동 폭 250에서 2400mm. 최대 톱 프로파일 80 x 100mm 각 헤드의 각도 설정: 반경 방향 +50° / - 50° 축 방향 +45°/ - 45° 톱날 직경 fi.350/30mm 모터 동력 1.85KW + 1.85KW 요소에 대한 잡지. 작업자에게 다시 배출 새 것과 같은 상태. 완벽하게 작동하며 바로 사용할 수 있습니다. 확인할 수 있습니다. 곧 출시됩니다. CE 및 완전한 문서와 함께.
사양: 작동 범위 mm: 최소 220 - 최대 1200 톱날 직경 mm : 350 구멍 mm : 30 모터 2개, 각각 1.5KW 수직 및 수평 톱날 기울기 35° 부속품을 위한 서랍 포함
1997년에 제작된 커팅 유닛 COMEC FM0V8 2000이 장착된 드릴을 판매하고 있습니다. 최대 작업 폭 2000mm 구성: 아래에서 0 모터 측면에서 1 + 1 모터 / 각도 조절 가능 뒤에서 2개의 모터 / 머리 각을 조정가능한 위에서 3개의 모터/머리 각은 조정가능한 위에서 4 조각의 재료 인쇄물 위에서 2 컷 톱 / 머리 각도 조절 가능 비정형 5 스핀들 드릴 헤드 3 x 15mm / 2 x 25mm를 포함합니다. Dubel은 가격에 머리를 맞댄다. 아주 좋은 추가. 동일하게 사용할 수 있습니다.
Line consists out of: 1 - Decoiler 15 ton - max length: 1200 mm 2 - Slitting unit - interchangeable cassette system - max length: 1100 mm - max thickness: 3 mm 3 - Scrap winder 4 - Recoiler + unloading arm
CNC frame processing machine Brand: COMEC DRIVER New machine - With this machine you can process assembled door frames in quantity-1, door by door. - 5-axis machining spindle with ingenious crosshead technology for fastest tool use and productivity. Automatische Positionierung der Auflagensupporte. - High-precision and program-controlled clamping system with O-reference on the surface. - Laser measurement of the surface contours for precisely fitting milled fittings. - Automatic discharge of the finished frame parts. - Possibility of connection to known door software systems. - The machine can be individually designed to meet your required machining needs. Give us your requirements and let us offer you your MD JAMB suitable. - This offer is valid for Germany. Wehrmann is the exclusive sales and service partner for COMEC in Germany.
CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...
CNC Drawer fronts processing machine Brand: Comec Type: FRONTAL CN 1500 2S New machine for point to point drilling and milling, with automatic loader and pieces return to the operator Structure Frame of electro-welded steel sheet of heavy-duty construction Loading system 1 fix left shoulder and 1 mobile right shoulder on which are fixed the loader, magazine and locking system. Manual adjustment of the mobile shoulder on ball bearings slides with measure indication by digital display. Automatic loader with vertical adjustable magazine. Pieces advancement system step by step with 2 working stations, complete with locking cylinders on each station. Pieces return system Pieces return system composed with: 1 transversal motorized belt kW 0.37. 2 ejector cylinders. 1 longitudinal, lateral motorized belt kW 0.37. 1st Working station: vertical-horizontal Point to Poi ...
Drilling- cutting machine Brand: Comec Type: FIMOV new machine IDEAL MACHINE FOR NARROW PART MACHINING IN THE FURNITURE SECTOR Machine can be combined with drilling units from several sides, Sawing unit for cutting the workpiece to length, optionally inclinable With magazine and automatic workpiece transport to the operator
Drilling- cutting machine Brand: Comec Type: Frontal 2 CN New machine Drawer parts machining in compact design Fast set-up for the smallest possible batch sizes thanks to CNC technology - Perfect machining The FRONTAL CN is ideally equipped for the machining of drawer parts and can be optionally equipped with drilling units from above, but also laterally, e.g. for drawer side parts. The drilling units at the top are suspended at the front of the upper beam so that a grooving saw unit can be mounted at the rear, for example, for drawing in top grooves. The machines can be equipped either with manual feeding or with automatic feeding magazine, so that the machines can work in continuous operation. For larger batch sizes, the FRONTAL is also available as a BASIC machine with conventional control.
CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed
New CNC Maschine Brand: Comec type: MD JAMB CNC machining center for complete machining of a wide range of door frames. 3 machining supports for cutting to length on miters, milling for corner connectors and door lock panels. A complete door frame element with decorative cladding and rebate cladding is machined in one set-up. A complete frame can thus be machined in approx. 2.5 - 3 min. Machining equipment can be individually adapted to the customers requirements.
General SKU022Y162 LocationBarneveld MakeComec Sassuolo TypeMicronet Tipo M8 No.7107 Year of construction1995 Material Housing materialStainless steel Disc materialStainless steel Main Features MaterialStainless steel Volume8 Ltr. Specified Features - Sand mill Vertical sandmillDiscontinuous micro ball mill (1x) Capacity8 Ltr Housing dimensions dia. 170x335mm With sievecheck With jacketcheck Motorcheck MaterialStainless steel Information With switchcheck Floorspace0,6x0,6 M Total height1,1 M Weight160 KG Extra Specifications- Mixing chamber equipped with 2 dissolver discs (dia. 115mm) on 1 shaft Sand millsComecMills > Sand millsBrand > Comec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherl ...
General SKU060U432 LocationBarneveld MakeComec TypeMicronet 25 No.6757 Year of construction1994 Material Housing materialStainless steel Main Features MaterialStainless steel Volume25 Ltr. Motor4 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillDiscontinuous microball mill (1x) Capacity25 Ltr, Useful 8-22 Ltr With sievecheck With mechanical sealcheck With jacketcheck Motor4,0 KW, 220/380 Volt With variable speed drivecheck Information With switchgearcheck Floorspace1,2x0,5 M Total height1,5 M Weight230 KGSand millsComecMills > Sand millsBrand > Comec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Double carriage blow molding machine still installed and working, with siemens s7 plc, temperature adjustment from plc and possibility to store recipes.
The machine of the Italian company COMEC model CS 1500 two trolleys for the production of bottles, canisters 0.1 to 2L Forms can be purchased The machine is currently working Possibility of installing a double head Energy-saving inverter installed
The machine of the Italian company COMEC model CS 2000 two trolleys for the production of bottles, canisters 0.1 to 2L Forms can be purchased The machine is currently working Possibility of installing a double head Energy-saving inverter installed
Grinding diameter maximum: 330 mm Grinding diameter minimum: 0 mm Grinding wheel diameter: 0 mm Grinding wheel width: 0 mm SPECIFICATIONS Cylindical / Surface / Other Swing head grinder Grinding diameter Ø 330 mm X - Travel 680 mm Y - Travel 300 mm Grinding wheel size 330 mm kW power on spindle 1,75 kW Spindle speeds / ranges 1400 Rpm DIMENSIONS Length 1100 mm Width 1400 mm Height 1700 mm