범주: 103 밀링 머신 / CNC 베드 밀링 머신
최신 업데이트: 22.04.2024 감시 목록에 추가
기계: ANAYAK PERFORMER 2000
품목 아니오.: 160308081
새로운 기능: 2007
사용
값: 22.620 €

2007년 스페인에서 제작된 ANAYAK PERFORMER 2000 CNC 밀링 머신은 최대 5000kg의 대형 공작물을 정밀 가공하기 위해 A+B 평면에 자동 위치 지정 기능이 있는 비틀림 밀링 헤드를 사용합니다. 가공 공정은 이송 속도가 2000 (X 축), 1000 (Y 축) 및 1000 (Z 축) 인 X, Y, Z 축에서 2200 x 850 mm 크기의 치수 (L x W)로 밀링 머신의 쉽게 접근 할 수있는 작업 테이블에서 수행됩니다. CNC 베드 밀링 머신에는 60에서 3000rpm까지 2단계 속도 조절이 가능한 고효율 스핀들이 있어 밀링 시간을 크게 단축할 수 있습니다. 이 기계에는 하이덴하인 iTNC 530 CNC 제어, 스핀들을 통한 냉각 및 RENISHAW RMP60 공작물 프로브가 있는 제어 패널도 있습니다. CNC 베드 타입 밀링 머신의 무게는 14000kg입니다. ANAYAK PERFORMER 2000 머시닝  ...

범주: 103 밀링 머신 / CNC 밀링 센터
최신 업데이트: 12.03.2024 감시 목록에 추가
기계: ANAYAK ANAMATIC 9
품목 아니오.: 163561010
사용

수직 CNC 밀링 센터 아나야크 아나마틱 9 건축 년도 7/97 현재 해체되어 운송 준비 중입니다. 이 기계는 2022년 중반까지 생산되었습니다 즉시 사용 가능 및 즉시 사용 가능 기술적 인 매개 변수 : 작업대 길이 1300 mm 작업대 폭 530mm 최대 테이블 하중 (균일) 500 kg 보관 용기의 도구 수 30 개 최소 수직 스핀들 속도 70 1/min 최대 수직 스핀들 속도 5000 1/min 기계식 이송 길이 축 X 1070 mm 기계식 피드 길이 차축 Y 535 mm 기계식 이송 길이 축 Z 510 mm X축 최대 이송 속도 250 mm/s 최대 이송 속도 축 Y 250 mm/s 최대 이송 속도 축 Z 250 mm/s Fanuc 160i-L 사용 시 언제든지 관람 및 운반 가능 저렴한 파이낸싱/할부 구매/기계 보상 판매를 제공합니다! Maschinenhandel Nord 산업, 무역 및  ...

범주: 103 밀링 머신 / 기타 밀링 머신
최신 업데이트: 26.02.2024 감시 목록에 추가
기계: ANAYAK VH 2200
품목 아니오.: 161335625
사용
값: 34.000 €

가격 : € 34.000,00 + 부가가치세. 중고 ANAYAK VH 2200 밀링머신 사양: X 축: 2000 mm Y축:920 mm Z 축: 900 mm CNC: 하이덴하인 426 테이블 크기: 2200x750 mm 테이블 용량: 3500kg 스핀들 회전 속도: 3000rpm 최대 전력: 33kW 모터 힘: 30 kW 6 x 18mm T-슬롯이 장착된 기계 T-슬롯 간격: 120mm 공구 홀더 유형: ISO-50 칩 진공기 기계 치수 : 4960 x 3535 x 3000 (h) mm 무게: 8000 kg 판매되지 않는 한 즉시 배송이 가능한 양호한 일반 상태의 기계. 사진의 액세서리는 포함되어 있지 않습니다.

범주: 103 밀링 머신 / 밀링 머신
최신 업데이트: 18.09.2023 감시 목록에 추가
기계: ANAYAK VH-PLUS-3000-N
품목 아니오.: 162424655
새로운 기능: 2001
사용

상표: ANAYAK 년도 : 2001 모델: VH-PLUS-3000-N 응용 프로그램 유형: 맷돌로 갈기 위치: 스페인 기계 유형: 축융기 가용성: 즉시 기술 정보 일반 데이터 기계 무게 : 25000 KG 제어 장치 상표: 하이덴 하인 모델: 426 메인 드라이브 스핀들 속도 범위: 3000 1/MIN 스핀들 모터 동력 : 30 KW 축선 수: 3 움직임 X축 이동: 3000MM X축 급속 트래버스: 20000MM/MIN Y축 무브먼트: 1270 MM Y-축 급속 트래버스: 20000MM/MIN Z축 무브먼트: 1070 MM Z축 급속 트래버스: 10000MM/MIN 테이블 외부 길이: 3200 MM 외부 폭: 1100 MM 테이블 하중: 6000 KG 도구 공구 홀더 유형: ISO 50 추가 정보 기계 혜택 기술 기계의 이점: - 슬롯 간 거리: 120MM - 작업 이송 속도: 5000MM/MIN - 유니버셜 헤드 매뉴

범주: 103 밀링 머신
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: ANAYAK FBZ - HV - 2500
품목 아니오.: 163888775
새로운 기능: 1997
사용

x-travel:2500 mm y-travel:900 mm z-travel:1000 mm total power requirement:40 kW table surface area:2900 x 800 mm feed speeds:10 - 6000 mm/min rapid speed:10 m/min spindle taper ISO:50 spindle speeds::60 - 3000 spindle drive:22 kW total power requirement:40 kW dimensions of the machine ca.:6,5 x 5,9 x 3,5 m Machine was refurbished and retrofit in 2012 CNC HEIDENHAIN iTNC 530 2-axis milling head 2,5° indexing toolchanger for 30 tools 4. axis SEMPUCO tbale dia. 500 mm

범주: 101 보링 밀 및 머시닝 센터 / NC 머신 센터
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: ANAYAK FBZ-HV-2500
품목 아니오.: 163837622
새로운 기능: 1992
사용
값: 중고 기계 경매 재판매 4.900 €

Description: Serial number: FBZ-8882 Operating voltage: 380 V Frequency: 50 Hz Rated current: 60 A Connection: 40 kW Control: HEIDENHAIN TNC 407 Tool holder: SK 50 Travel distances: X: 2500 mm Y: 800 mm Z: 815 mm Table clamping surface: 2900 x 800 mm Distance from floor to top edge of table: 950 mm Table surface with 5 T-sLot width/spacing: 22H12/150 mm Center groove: 22H7 SPECIAL FEATURE: max. table load without weight limit! Distance spindle nose - table surface min./max.: 0 - 817 mm Distance spindle center - table start: 235 mm Distance spindle center - table end: 935 mm Universal head position: 90° Distance spindle center - table surface: min. 200 mm, max. 1100 mm Horizontal position: 0° Distance spindle center/table surface min./max.: 0 - 900 mm Distance spindle nose/start of table: 150 mm Distance spindle nose/table end: 820 mm Horizontal position: 180° Distance spindle center/t ...

범주: 103 밀링 머신 / 여행 컬럼 밀링 머신
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: ANAYAK FBZ-HY-2500
품목 아니오.: 157384715
새로운 기능: 1997
사용

x-travel: 2550mm y-travel: 900mm z-travel: 1200 mm 제어: Heidenhain 유형: 355 테이블 표면: 2900x800 mm 프로젝션: 1000 mm 스핀들 홀더 ISO: 50 핸드휠: 칩 컨베이어: 공구 장력 전기: 총 전력 요구 사항: kW 기계 중량 약: t 공간 요구 사항 약: m 기술 데이터는 제조업체 또는 작업자의 사양이므로 구속력이 없습니다. 우리는 사전 판매를 할 권리를 보유하며, 비즈니스 및 판매 약관은 독점적으로 적용됩니다 . 저희 에 관하여 12000 m² 저장 지역 이상 창고 에 있는 400 이상 자신의 기계, 기중기 수용량 70 t 이상 1000 품목 당신의 작업 장을 위한 부속품 당신이 기계 생산 라인 또는 당신의 회사를 판매하고 싶은 경우에, 그 후에 저희에게 연락하십시오. 이 광고의 데이터는 LogoTech oHG의 기계 관리 인 ModulMWS ...

범주: 103 밀링 머신 / 범용 밀링 머신
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: ANAYAK VH 1800
품목 아니오.: 157384716
새로운 기능: 2004
사용

x-travel: 1600 mm y-travel: 920 mm z-travel: 900 mm table surface area: 1800x700 mm T-slot - distance: 120 mm Table load: 3000 kg spindle taper ISO: 50 power capacity: 22/30 kW spindle turning speed range: 60-3000 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 103 밀링 머신
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: ANAYAK HVM 11000P
품목 아니오.: 156366098
새로운 기능: 2002
사용

x-travel: 10500 mm y-travel: 2750 mm y-travel: (3350) mm z-travel: 1500 mm turning speeds: 3500 U/min Tool changer: 80 Control: Heidenhain TNC 430 M positioning accuracy: 1 ° milling-head swivable +/-: CNC Plate area: 12000x2500 mm chip conveyor: spindle taper ISO: 50 Spindle capacity: 37 KW Feed: 6000 mm/min Rapid movement: 15000 mm/min total power requirement: kW weight of the machine ca.: 65 t dimensions of the machine ca.: 18,1x6,7 m CNC angle head 360 ° with 1 ° Hirtverzahnung spindle hours 13500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 109 기타 금속 가공 기계
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: ANAYAK HVM-5000
품목 아니오.: 160822071
새로운 기능: 1997
사용

x-travel: 4300 mm y-travel: 1000 mm z-travel: 1050 mm total power requirement: kW weight of the machine ca.: 35 t dimensions of the machine ca.: m Brand: ANAYAK Type: HVM-5000 Build in : 1997 CNC Control HEIDEHAIN, TNC 426 Tablesize: 5000 x 1000 mm X= 4.300 mm Y= 1.200 mm Z= 1.050 mm Toolchanger for 40 tools Tools: BT 50 CNC Controlled head 2,5 degrees Cooling trough the spindle Number of controlles axes: 4 machineweight 35.000 kg Moveable column The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 103 밀링 머신 / CNC 베드 밀링 머신
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: ANAYAK HVM 7000
품목 아니오.: 160348827
새로운 기능: 1997
사용

x-travel: 6300 mm y-travel: 1200 mm z-travel: 2000 mm Control: total power requirement: kW weight of the machine ca.: 57 t dimensions of the machine ca.: 7000x1300x5000 mm Brand: Anayak Type: HVM7000 CNC brand: Heidenhain Year of make: 1997 Table length: 7.040 mm Table width: 1.000 mm X: 6.300 mm Y: 1.200 mm Z: 2.000 mm max. 3000 Rpm Machine dimensions (lxwxh): 7000 x 1300 x 5000 mm Machine weight: 57.000 kg including 6 angleplates 2500 x 700 mm this machine is in perfekt working order and can be inspected under power The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 103 밀링 머신 / 침대 밀링 머신
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: ANAYAK VH-2200
품목 아니오.: 160004370
새로운 기능: 2001
사용

x-travel: 2000 mm y-travel: 920 mm z-travel: 900 mm table surface area: 2200 x 750 mm table load: 3 t number of T-slots: 6 T - slots - width: 18 mm T - slots distance: 120 mm spindle taper: ISO 50 DIN 69871-B spindle speed max.: 3000 U/min transmission ratio: 1 speeds infinitely variable range 1: 60 - 3000 U/min weight of the machine ca.: 21,6 t feeds longditudinal/cross/vertical: 0 - 5000 mm/min rapid traverse: 15000 mm/min total power requirement: 38 kw weight of the machine ca.: 11 t Pull studs DIN69872-B | IKZ Hours: Control on: 43036 h Machine on: 41311 h Program run 13894 h The machine is already dismantled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 103 밀링 머신
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: ANAYAK 1080
품목 아니오.: 156327233
새로운 기능: 1986
사용

x-트래블: 800mm y 트래블: 450mm z-트래블: 400mm 테이블 클램핑 표면: 1385 x 305mm 스핀들 홀더: SK 40 피놀 스트로크: 200mm 스핀들 속도: 50 - 3500rpm 제어: 하이덴하인 제어: TNC 155 총 전력 요구 사항: 5.8kW 기계 중량 약: 2.5 t 치수 L x W x H: 2.25 x 2.0 x 2.4 m 액세서리: elektron. 핸드휠, 냉각수 장치 데이터 f & uuml,이 광고는 ModulMWS - LogoTech oHG의 기계 관리로 만들어졌습니다.

범주: 103 밀링 머신 / 침대 밀링 머신
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: ANAYAK VH PLUS-3000
품목 아니오.: 162883741
새로운 기능: 2013
사용

x-travel: 3.000 mm y-travel: 1.700 mm z-travel: 1.500 mm Control: HEIDENHAIN TNC 530 HSCI table-size: 3.200 x 1.100 mm T-slots: 7 T - slots distance: 150 mm T-slot - distance: 22 mm table weight: 8.000 Kg rapid travel x/y/z: 20.000 mm/min feed: 10.000 m/min milling head -swivable +/-: 45° UAD/ 0.1º/0.1º ° tool taper: ISO-50 DIN 69871 AD spindle turning speed range: 60 – 6.000 U/min transmission ratio: 2 Spindle power: 38 Tools changer: 30 fach/tools Internal cooling system: 40 bar Chip coveyor: Quer Chip coveyor: Längs handwheel: Inkl. total power requirement: 48 kW weight of the machine ca.: 30 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 103 밀링 머신
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: ANAYAK HVM-5000
품목 아니오.: 163882511
사용

X-travel: 11,000mm, y-travel: 5000mm, connected load: 50kW, on-site inspection is possible, the drive motor of the spindle on one traveling column has been removed and is defective.

범주: 103 밀링 머신
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: ANAYAK VH-Plus-3000-N
품목 아니오.: 163741232
새로운 기능: 2001
사용

This ANAYAK VH-Plus-3000-N milling machine was built in the year 2001 in Spain. It is equipped with a Heidenhain 426 control unit and has 3 axis. The machine has a spindle speed of 3000 rpm.

범주: 103 밀링 머신
최신 업데이트: 22.04.2024 감시 목록에 추가
기계: ANAYAK PERFORMER 2000
품목 아니오.: 162903773
새로운 기능: 2007
사용
값: 59.000 €

• brand: heidenhain • model: itnc 530 Main drive • spindle speed range: 60-3000 1/min • spindle motor power: 24/38kw • clamping cone: so 50 to din 69871-ad • number of axles: 3+2 Shift • axis x travel: 2000 mm • y-axis travel: 1000 mm • axis with travel: 1100 mm Table • external length: 2200 mm • external width: 850 mm • table load: 5000 kg • machine length: 5500 mm • machine width: 4000 mm • machine height: 2900 mm • machine weight: 14000 kg Technical data: year of manufacture: 2007 - spindle power: 24/38kW - spindle speed: 60-3000 rpm - head indexation: -180 degrees to +177.5 degrees every 2.5 degrees - cooling through the spindle: yes pressure 20bar - detail probe: yes RMP-60 Renishaw - tool magazine: no - rulers in the axes: none - table dimensions: 2200×850 mm - load  ...

범주: 101 보링 밀 및 머시닝 센터
최신 업데이트: 22.04.2024 감시 목록에 추가
기계: ANAYAK ANAKMATIC
품목 아니오.: 163459813
새로운 기능: 1999
사용
값: 14.000 €

used machining center Brand: ANAYAK Model: ANAKMATIC 7 Serial number: N990013 Year: 1999 Routes (X, Y, Z): 800x450x505mm Table dimensions: 900x425mm Weight on table: 500kg Spindle speed: 6,000rpm Cone: ISO 40 Random 20 tool charger. Control FANUC Series O-M

RESALE used machinery 25 years online