기계 유형: 파이프 노칭 기계 제조사: ALMI 상태: 아주 좋음 제안 유형: 중고 기계 사양: 파워: 5가지 사이즈 Ø 28 – 61 mm 구동 장치형: el./mech. 추진 속도: 2.2 kW 말: 하부구조 무게: 100kg 기계는 매우 양호한 상태이며 즉시 사용할 준비가 되어 있으며 당사에서 보고 시연할 수 있습니다. 우리의 제안에 관심이 있으시면 기쁩니다. 오류, 수정 및 사전 판매는 제외됩니다.
연삭 직경: Ø20 - Ø76.1 mm 연삭 각도 : 30º - 90º 벨트 속도: 30 m/s, 2800 rpm. 벨트 치수: 100 × 2000 mm 가동: 레버와 수동 바퀴 가동 포함된 롤: Ø48.3 mm 모터 : 3 kW 원산지: 네덜란드 기계 LxWxH : mm 기계 무게: 210 kg 이 기계는 사용되지 않습니다!
ALMI AL1-2U의 전동 파이프 엔더 집중적 인 사용 중에 가스, 증기, 스테인레스 스틸, 비철 및 기타 수많은 파이프를 방출하기 위해 ALMI는 전기 드라이브가있는 일련의 특히 효율적인 파이프 잭을 개발했습니다. 파이프가 90 각도로 함께 용접되는 곳마다 ALMI의 탭은 올바른 파이프 오목함을 매우 빠르고 정확하게 보장합니다. 또한 이중 코너 연결 생산에 이상적입니다. 집중적 인 사용을 위해 파이프 잭에는 2.2KW 모터가 장착되어 있습니다. 모터는 노칭 공구를 구동하는 특수 편심 샤프트로 전체를 형성합니다. 모델 AL1-2U에는 아연 주둥이도 있습니다. 파이프 테이퍼에는 0 전압 퓨즈와 보호 장치가 있습니다. 속성 높은 생산성 낮은 자본 지출 즉시 여러 직경 사용 ...
tube diameter: 20 - 114,3 mm engine output: 4 kW grinding band dimension: 150 x 2000 mm Band Speed: 30 prm voltage: 230 oder 400 V weight: 270 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
벽 두께 최대: 4mm 외부 파이프 직경: 27 - 61mm 벽 두께: VA 3mm 기계 무게 약: 7kg AL-U 파이프 테이퍼를 사용하면 외경이 22 ~ 76mm인 파이프에서 아연 배출구를 탭할 수 있습니다. 낮은 가격과 높은 생산성으로 인해 ALMI 파이프 경첩은 훌륭한 투자입니다. ALMI 파이프 힌지는 최대 벽 두께 5mm의 외경 27mm에서 원형 및 직사각형 금속 파이프로 만든 통풍구 슬롯을 절단하는 데 사용할 수 있습니다. 이 광고의 데이터는 LogoTech oHG의 기계 관리 인 ModulMWS로 작성되었습니다.
: 27 / 34,8 / 42,8 /49 / 60 mm : 3/4, 1, 11/4, 11/2, 2 Zoll wall thickness max.: 5 mm wall strength: VA 4 mm voltage: 230 oder 400 V total power requirement: 2,2 kW weight of the machine ca.: 93 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
외부 파이프 직경: 42.4, 48.3 mm 외부 파이프 직경: 1 1/4, 1 1/2 인치 벽 두께 최대: 4 mm 벽 두께: VA 3 mm 기계 무게 약: 15 kg AL3 파이프 끝 부분으로," 외경이 42.4 및 48.3인 파이프를 탭아웃할 수 있습니다. ALMI 제품은 시장에 출시되기 전에 엄격한 품질 관리를 거칩니다. 별도의 보조 공구가 있는 펀치 버클링 기계와 달리 ALMI의 파이프 클리퍼는 언제든지 즉시 사용할 수 있습니다. 또한, 가격은 그러한 기계의 관련 원조 비용보다 낮습니다. 이 광고의 데이터는 LogoTech oHG의 기계 관리 인 ModulMWS로 작성되었습니다.
외부 파이프 직경: 48.3 / 60.3 mm 외부 파이프 직경: 1 1/2 및 2 인치 벽 두께 최대: 4 mm 벽 두께: VA 3 mm 기계 무게 약: 15 kg AL2 파이프 테이퍼를 사용하면 외경이 48.3 (1 1 /2") 및 60.3 (2")인 파이프를 풀 수 있습니다. ALMI 제품은 시장에 출시되기 전에 엄격한 품질 관리를 거칩니다. 별도의 보조 공구가 있는 펀치 버클링 기계와 달리 ALMI의 파이프 클리퍼는 언제든지 즉시 사용할 수 있습니다. 또한, 가격은 그러한 기계의 관련 원조 비용보다 낮습니다. 이 광고의 데이터는 LogoTech oHG의 기계 관리 인 ModulMWS로 작성되었습니다.
외부 파이프 직경: 26.9 / 33.7 / 42.4 mm 외부 파이프 직경: 3/4, 1, 1 1/4 인치 벽 두께 최대: 4 mm 벽 두께: VA 3 mm 기계 무게 약: 8 kg AL1 파이프 트랜링커를 사용하면 외경 26.9 (3/4"), 33.7 (1") 및 42.4 (1 1/4")의 파이프를 풀 수 있습니다. 수동 조작이 가능한 장치는 벽에 부착하기 쉽습니다. ALMI 파이프 클리퍼를 사용하면 파이프를 파일링 또는 밀링하는 것은 과거의 일입니다. 다른 노칭 공구에 비해 가장 큰 장점은 부품을 먼저 교체하지 않고도 한 세트만으로 여러 직경을 풀 수 있다는 것입니다. 이 광고의 데이터는 LogoTech oHG의 기계 관리 인 ModulMWS로 작성되었습니다.
최대 벽 두께: 5mm 벽 두께: VA 4mm 외부 파이프 직경: 26.9/33.7/42.4 /48.3/60.3mm 외부 파이프 직경: 3/4, 1.1 1/4, 11/2.2인치 총 전력 요구 사항: 2.2kW 작동 전압: 230 또는 400V 기계 무게 약: 87kg 모터 구동식 al12E 파이프 릴리즈를 사용하면 외경이 26.9(3/4"), 33.7(1") 및 42.4(1 1/4"), 48.3(1 1/2"), 60.3(2")인 파이프 를 분리할 수 있습니다. 파이프를 자주 뽑습니까? 그런 다음 2.2kW 전기 모터 로 구동되는 AL12E 파이프 방출이 올바른 솔루션입니다! 모터는 노칭 공구 를 구동하는 특수 편심 샤프트가있는 장치를 형성 합니다. 또한 모터에는 제로 전압 보호 기능과 보호 커버가있는 온 / 오프 스위치가 장착되어 있습니다. 이 광고의 데이터는 LogoTech oHG의 기계 관리 인 ModulMWS로 작성되었습니다.
tube diameter: 20 - 76,1 mm engine output: 3 kW Band Speed: 30 rpm grinding band dimension: 100 x 2000 mm voltage: 230 oder 400 V dimensions: 1450 x 1150 x 650 mm weight: 190 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 20 . 76,1 mm Band Speed: 30 m/sec engine output: 3 kW grinding band dimension: 100 x 2000 mm voltage: 230 oder 400 V : 2905 U/min dimensions: 1450 x 1150 x 650 mm weight: 210 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 20 - 114,3 mm grinding band dimension: 150 x 2000 mm Band Speed: 45 m/min. voltage: 400 V angle adjustable from - to: 20 - 90 Grad weight: 275 kg The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed.The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm.The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitab ...
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 789 € : 22-76 mm : 3 mm : 7 kg The ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm. Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment. ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4280 € : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 1 : 3 kW : 220 kg The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are e ...
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5680 € : 117.58 € : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe ...
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 953 € : 1 1/4, 1 1/2 mm : 3 mm : 15 kg The AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 729 € : 3/4, 1, 1 1/4 mm : 3 mm : 8 kg The AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",) and 42.4 mm (1 1/4",). The hand-operated machines can be easily wall mounted.With ALMI pipe notchers filing or milling pipes has become a thing of the past. The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2023 : 5543 : prompt, Zwischenverkauf v : Niederlande : 3660 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm The ...
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 879 € : 1 1/2, 2 mm : 3 mm : 15 kg The AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2",) and 60.3 mm (2",). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 6910 € : 143.04 € : 1 : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary type ...
: gebraucht : 2019 : 5505 : Niederlande : 2670 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm The data for this ad was c ...
시트 두께 : 5.0 mm 파이프 직경 : 27.9 - 61.0 mm 모터 : 400 볼트 총 전력 요구 사항 : 2.2 kW 기계 무게 약 : 93 kg. 한 눈에 볼 수 있는 장점: 높은 생산성, 낮은 투자, 간단하고 빠른 작동, 여러 직경을 즉시 사용할 수 있으며 이중 코너 연결에 이상적입니다. al1-2U 파이프 릴리즈를 사용하면 외부 직경이 26.9 (3/4?) 인 파이프를 만들 수 있습니다. 33.7(1?) 42.4(1_¼") 48.3(1_1/2?) 60.3 (2?) 및 외부 직경이 22 ~ 76 인 아연 배출구 용 파이프. 장비 : - mit Ausklinkkomb. f. Zinkauslaufklinkungen - für Rohre 27,9 - 34,8 - 42,8 - 49,0 u. 61,0 mm - 침대. 지침 이 광고에 대한 데이터는 ModulMWS (LogoTech oHG의 기계 관리)로 작성되었습니다.
시트 두께 : 5.0 mm 파이프 직경 : 27.9 - 61.0 mm 모터 : 400 볼트 총 전력 요구 사항 : 2.2 kW 기계 무게 약 : 87 kg. 한 눈에 볼 수 있는 장점: 높은 생산성, 낮은 투자, 간단하고 빠른 작동, 여러 직경을 즉시 사용할 수 있으며 이중 코너 연결에 이상적입니다. 모터 구동 파이프 힌지 AL1-2E를 사용하면 외부 직경 26.9 (3/4?) 33.7(1?) 42.4(1_1/4") 48.3(1_1/2?) 및 60.3(2?). 장비 : - 파이프 용 27.9 - 34.8 - 42.8 - 49.0 및 61.0 mm - 침대. 지침 이 광고에 대한 데이터는 ModulMWS (LogoTech oHG의 기계 관리)로 작성되었습니다.