中古 SIDEROS 販売のため

filling capacity: 300 kg max. workpiece height: 500 x 200 x 20 mm container volume: 158 l workpiece weight: 175 kg max. workpiece weight: 15 kg / Stck. revolutions per minute: 22 U/min filling amount: 40-50 % Colour: blau 5015 RAL 0: 624 x 270 mm total power requirement: 1,5 kW weight of the machine ca.: 650 kg Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is included ...

weight max. in kg: 2000 kg Working height minimal: 350 mm Working height maximum: 1800 mm max. torque: 3000 Nm 0: 1 U/min adjustment speed: vertikal 560 mm/min vertical adjustment: 1450 mm baseplate diameter: 600 mm rotation movement: 0,75 kW stroke drive: 1,85 kW height of the plant: 2505 mm weight: 1047 kg Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical360° left/right rotation. A typical configuration is composed of a motorized headstock p ...

負荷容量:1250 kg 作業高さ最小::540 mm作業高さ最大:1120 mm テーブル直径:800 mm スイベル範囲:--> 95度 トルク:490 Nm テーブル回転速度:2 rpm から作業高さ:540 - 1120垂直mm作業高さから700 - 1280 horiz. mm 総電力要件:2.53 kW 機械重量約:757 kg スペース要件約:1.76 x 1.63 m 永久に右+左に回転し、傾け 、持ち上げて下げるための油圧ポジショナー。イン� ��ータMODによる無段階旋削の追加料金。 EL/MRとフットペダルコントロール(要リクエスト)。 2500㎡の展示ホールを備えた倉庫キーパー。 この広告のデータは、LogoTech oHGのマシン管理であるModulMWSで作成されました。

table diameter: 800 mm table load: 2 t swivelling range: --> 95 Grad max. torque: 1250 Nm table rotation speed: 2 U/min Working height from to: 550 - 1300 vertikal mm Working height from to: 650 - 1400 horiz. mm total power requirement: 2,53 kW weight of the machine ca.: 930 kg dimensions of the machine ca.: 1,85 x 1,66 m Electric 400 Volt: Hand control panel: Hydraulic-device: Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

filling capacity: 300 kg max. workpiece height: 500 x 200 x 20 mm workpiece weight: 200 kg max. workpiece weight: 15 kg / Stck. revolutions per minute: 22 U/min filling amount: 40-50 % Colour: blau 5015 RAL 0: 625 x 270 mm total power requirement: 1,5 kW weight of the machine ca.: 650 kg range L-W-H: 1 x 1,7 x 1,29 mm Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is i ...

filling capacity: 800 kg max. workpiece height: 900 x 300 mm workpiece weight: total 500 kg container volume: 878 l max. workpiece weight: 30 kg/Stck. revolutions per minute: 22 U/min filling amount: 50-60 % Colour: blau 5015 RAL 0: 1175 x 440 mm total power requirement: 3 kW weight of the machine ca.: 1995 kg dimensions of the machine ca.: 2,9 x 1,33 x 1,75 m Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. Suitable for heavy applications. 6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation. Control by timer on control surface, main and emergency stop switch. The maximum fillingquantity is 40% of the container volume and corresponds to 800 kg consisting of 500 kg workp ...

Max. load: 2.5t, connected load: 4kW, weight: 1.477t.

Sells SIDEROS Rotoclean brand deburring barrel Year of manufacture 2019 Very little used, almost new tank interior,