メカニカルプレス カイザー315トン。 モデル: V 315 WR/2340 条件:良い、完全な 技術的な詳細: 力: 315 T 寸法ピアノ:2280x1250ミリメートル スライドサイズ:2000x1200 mm スライドトラベル:280ミリメートル スライド調整:150ミリメートル 金型高さ:500ミリメートル ストローク数:ミミュートあたり20-60
メカニカルプレス カイザー250トン。 モデル: V 250 WR/2340 条件:良い、完全な 技術的な詳細: 力: 250 T 次元ピアノ:2000x1200ミリメートル 寸法スリッタ:2000x1200ミリメートル スライドトラベル:280ミリメートル スライド調整:150ミリメートル 金型高さ:495ミリメートル ストローク数:ミミュートあたり15-60
ローラーフィード KAISER ZR 12 ベルト幅 - 120 mm 送り長さ 100 mm 送り角度 - 調整可能 - 90 - 180度 技術。状態 - 良好、完全 空気圧付き。予備部品 Btto 250のkg
自動パンチングプレス、高速プレス、偏心プレス、 ングルコラムプレス、パンチングマシン、シング コラム偏心プレス。 メーカー:カイザーPO 10。 製造年:1982。 耐圧:10[トン]。 ストローク:2〜40[mm]調整可能。 速度:120-600 [ストローク/分]。 テーブルサイズ:460×250[mm]。 クランプピン:32 [mm];深さ50[mm]。 中央自動潤滑システム。 接続:380 [V];50 [Hz]です。 モーターの手動速度調整。 モーター:ストーバー;1.1 [キロワット];1450 [1/min]です。 シングルディスククラッチとブレーキ。 寸法:1250/950/H1800 [mm]。 重量:850[kg]。 El 回路図が含まれています。 梱包と積み込みが含まれています。 給餌装置は含まれていませんが、必要に応じてお問 合わせください
pressure:063 t stroke:70 fix mm no. of strokes:15 - 60 /min distance between columns:1340 mm width between oil collecting pans:1180 mm distance table/ram, max. stroke up, adjustment up:328 mm table surface area:1260 x 700 mm hole in the table:1000 x 100 mm table height over floor:1000 mm column travel -side:470 mm ram surface:1300 x 650 mm ram adjustment:100 mm power requirement:27,5 kW weight:13,7 t Dimensions (WxDxH):3,4 x 2,1 x 3,4 m clutch:pneumatic overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:motoric
Description: Press force: 35 to Number of strokes: 80 - 300 Stroke: 6 - 50 Ram adjustment: 50 Table dimensions: 540 x 340 mm Hole diameter: approx. 125 mm weight approx.: 1,800 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,000 x 2,200 mm
Description: Water/oil separator for compressors with condensed air. Approx. Onsite Dimension. (l x w x h): 900 x 900 x 1,400 mm, weight approx.: 100 kg
Tool holder, milling holder, milling tool -Number: 8x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 32 kg
Tool holder, milling holder, milling tool -Number: 14x SK50 mounts -Tool holder: Ø 36 mm -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Dimensions: 800/315/H650 mm -Weight: 62 kg
Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool -Quantity: 2x spindle tools -Intake: SK50 -Spindle dimensions: 145-230/225-310 mm -Price: complete -Weight: 14 kg/pc
Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for tool changers -Sale: only complete -Weight: 10 kg
Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Kaiser, punching machine with gripper feed type PO 40 F -Pressure capacity: 55 tons -Stroke: adjustable from 9 to 60 mm -Stroke rate: 70-350 strokes/min -Table size: 590 x 410 mm -Table recess: 290 x 150 mm -Projection: 220 mm -Punching fixture: Ø 38 mm -Insertion height 335 mm -Dimensions: 1905/1540/H2940 mm -Weight: 3720 kg
圧力:63 t ストローク:10-80 mmストロークレート:65-400ストローク/分 タペット調整:80 mmテーブル表面:1030x550 mmラムエリア:920x450 mm テーブル内の下痢口開口部:700x200 mm設置高さGr.Stroke底部、プラグ調整トップ:420 mm 機械重量約:10 t ダブルスタンド、2ロッド、IMCO プレス力測定システム、中央 潤滑 自動ストローク調整 電動プッシュオフ リール Wanzke 回転 プライヤーフィード データfü、この広告はModulMWSで作成されました - ロゴテックoHGのマシン管理。
圧力:25 t ストロークレート:60-300ストローク/分 シート幅:150 mmプランジャー調整:6-50 mm テーブル表面:350x400 mm ラム面積:250x250 mm テーブル内のブレークダウン開口部:130x150 mm 機械重量約:3 t 空気圧クラッチブレーキの組み合わせ 機械式クランプフィード オイル中央潤滑 この広告のデータは、LogoTech oHGの機械管理であるModulMWSで作成されました。
圧力:40 t 設置高さ:250 mm ストローク:8 - 50 mm クランプ面 テーブル長さ x 幅:620 x 450 mm 廊下上のテーブル高さ:980 mm ストローク速度:85 - 500ストローク/分 スタンド間の距離:680 mm プランジャー調整:50 mm T溝の数:4 タペット面積:mm 総電力要件:8 kW 所要スペース 約:2.3 x 2.2 x 2.8 m 機械重量約: 5.8 t -プランジャー、2本のコネクティングロッド 付き - ユニドールツールモニタリング - クランプフィードカイザー右、ストリップ幅180 mm、フィード長さ150 mm、最大2 mm -スクラップせん断カイザー左 - 防音クラッディング - ローラーベアリング偏心シャフト データfü、この広告はModulMWS - LogoTech oHGの機械管理で作成されました。
圧力:75 t 投影:260 mm ストローク:16-80 mm テーブル表面:800 x 520 mm 距離テーブル/プランジャー:350 mm ストロークレート - 無限可変:50 - 250ストローク/分 ラム面積:400 x 300 mm プランジャー調整:70 mm 総電力要件:7.5 kW スペース要件約:2.7 x 1.7 x 2.6 m 機械重量約:テーブル内の4 t 下痢開口部:260 x 180 mm -プネウム。 追加のブレーキ を備えたOrtlinghausエアクラッチ - Stöhrerドライブ による無限に可変速制御 - ブレークプレート - 2手操作 - 追加のクランププレート - クラッチ 用エアアキュムレータ - オイル循環潤滑 データ fü、この広告はModulMWS - LogoTech oHGの機械管理で作成されました。
Punching force: 630kN, stroke adjustment: 10-80mm, ram adjustment: 80mm, stroke speed: 65-400/min, connected load: 11kW, length: 1590mm, width: 1650mm, height: 3000mm, weight: 9.5t, with documentation.
Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 680 mm Free lateral opening F-B: 250 mm Distance between oil tray: 560 mm Table surface area : 640 x 450 mm Slide area: 560 x 350 mm Hole in table: 450 x 110 mm Number of strokes: 85 - 500 s.p.m. Table height over floor: 875 mm Required power: 7,5 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 5,8 ton
Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton
Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton
Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5
Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton
Press capacity: 100 ton Ram stroke: 300 mm Slide adjustment: 125 mm Shut height (stroke down, adjustment up): 600 mm Free frontal opening L-R: 2.020 mm Free lateral opening F-B: 620 mm Table surface area : 2.000 x 1.000 mm Slide area: 2.000 x 900 mm Hole in table: 1.700 x 300 mm Number of strokes: 10 - 50 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 4.400 mm Dimensions L x W x H: 5.166 x 2.500 x 4.400 mm Weight of machine approx.: 38 ton
Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW
Press capacity: 32 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 270 mm Free frontal opening L-R: 685 mm Free lateral opening F-B: 250 mm Table surface area : 680 x 530 mm Slide area: 565 x 350 mm Hole in table: 450 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 950 mm Required power: 7,5 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 5,5 ton
Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton
CONTROLS conventional PRESS FORCES total force (nominal): 60 to SLIDE (MECHAN. PRESS) slide adjustment: 70 mm stroke min.: 11 mm stroke max.: 60 mm variable speed: yes stroke rate (min.): 60 /min stroke rate (max.): 240 /min ATTACHMENTS (PRESSES) strip feeder: yes
PRESS DESIGN drive system: eccentric / crank frame design: H-frame, tie rod openings in uprights: yes table cushion: yes feedstock transport direction: left to right PRESS FORCES total force (nominal): 200 to PRESS TABLE table surface (left-right): 1780 mm table surface (front-back): 1300 mm opening in bed (left-right): 1445 mm opening in bed (front-back): 260 mm SLIDE slide force: 200 to table surface (left-right): 1500 mm table surface (front-back): 1100 mm stroke: 178 mm stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS) slide adjustment: 150 mm stroke rate (min.): 20 /min stroke rate (max.): 120 /min DIE CUSHION (TABLE CUSHION) number of cushions: 11 & ...
Technical data Pressure: 32 to Stroke: (stepless) from: 80 s/min up to: 400 s/min Execution: 4 supports Table surface: Length: 420 mm Width: 380 mm Tool height: 300 mm With pressing power: upside down Slide adjustment: 50 mm Stroke adjustment: from: 6 mm up to: 50 mm slide bore diameter: 32 mm Slide clamping surface: Length: 420 mm Width: 380 mm Passage between the supports: longitudinal: 420 mm Lateral: 250 mm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 3000 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 2700 mm Various accessories: Automatic feed: number: 1 Execution: collets Draw-in left Electro-pneumatic clutch Upper extractor Stock reels with electric motor
용량 (x) : 0 공정 응용 프로그램 : 0 기타 정보 : 스핀 들에 0 기술 데이터 테이퍼 : BT 50 직경 : 53 - 70 mm