veneer machines used for sale

This KUPER FL / Innovation veneer splicer was manufactured in 2008. Ideal for precise veneer joining, it ensures reliable performance with its robust design. Consider the opportunity to buy this KUPER FL / Innovation veneer splicer. Contact us for more information about this machine.

Code: 0091 Brand: KUPER Model: FW / J 920 - CE Standard Veneer thread splicer - CE Standard Technical data: Reach mm 920 Veneer thickness mm 0,4 - 2 Feed 15 mt/min Working table height mm 900 Motor 0,18 Kw Installed power 0,50 Kw Hot air heating 200 W Compressed air 6 bar Overall dimensions mm 1280 x 580 x 1470 h Weight kg 166

FH 2 joining saw and fine-cutting saw with joining unit (planing unit) and veneer stop table Robust mechanical engineering from Mayer A video of the running machine can be sent on request. For tear-free and joint-tight cutting of veneer, including heavy-cut veneer Cutting length max. 3100mm The sawing unit and joining unit are combined in one unit, so that only one unit has to be moved. Easy-to-guide sawing unit, runs on ground and hardened shafts. Rear side table with penetrating finger stop, adjustable from 2 - 62cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Drive motor saw 1.8kW, milling power 1.0kW The motors can be switched on practically at the handle, so they only run when they are needed. HM-tipped fine-cut blade, sharpened Z4 planer head, equipped with new knives and spare blades Practical front veneer support, extendable for plani ...

Plate dimensions: 3.000 x 1.350 mmDaylight opening: 400 mmNumber of daylights: 1 St.Heating: Elektrisch Specific pressure: 2,84 kg/cm²Total pressure: 115 toMotor output: 2,2 kWDimensions (L/W/H): 3.500 x 1.630 x 2.200 mmweight of the machine ca.: 5.000 kgsafety device: Notaus-Trittleiste The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For the joining of veneers with thicknesses 0,4 up to approx. 3 mm.The joining medium is a glue impregnated thread which is applied in zig-zag or in a wavy line accross the joints of the veneer sheets by means of a heated thread guideThroat depth: 1150 mmFeed speed, infinitely adjustable: 10 to 30 m/minPower installed: 1,5 kW

Cutting length: 2300 mmMax pack height: 80 mm.Hydraulic pressure beam2-hand operationLight beam securityMotorised back fence

Proven veneer assembling machine, veneer sewing machine from Kuper FWJ920 in extremely good condition Veneer thickness approx. 0.3 - 2mm Feed speed approx. 15 m/min Projection 920mm Power connection 380V / 0.45kW Automatic start via contact brush, interruption via foot pedal 1 spool of glue thread Threader Release Operating instructions The machine is set. You can get started right away. Original paint, only a few paint spots touched. New jetty New nozzle tip and thread guide Rubberized ejection roller new Glue thread protection hood grey renewed CE mark Operating instructions Dimensions approx. 1350 x 500 x 1750mm (LxWxH). Weight approx. 185kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers of this supplier".

Code: 0066 Brand: EMME ELLE Model: TO 3200 - CE Standard One-blade hydraulic veneer cutting machine - CE Standard Technical data Very sturdy structure Cut length mm 3220 Cut height mm 100 Cutting display light Feed gauge with programmer to set cutting measurements - Motor Hp 0,75 Hydraulic control unit controls the movement of the cylinders to move the pressure and blade and guarantees maximum cutting speed and power - Motor Hp 7,5 Max cut depth mm 750 Min cut depth mm 20 Safety photocell barriers End cutting side control panel Overall dimensions mm 4200 x 1900 x 1850 h Weight kg 4300

Cutting length: 2330mm, insertion height: 80mm, length: 3410mm, width: 1650mm, height: 1570mm, weight: 2.4t.

Panel length: 3200mm, panel width: 1000mm, max. workpiece thickness: 38mm, min. infeed length: 500mm.

Splicing machine with glue thread Make: Casati Type: Z 2000 technical details: arm length: 1.200 mm veneer thickness: 0,4 - 2 mm feed speed: approx. 5 - 40 m/min. noise measurement: 73,5 dB compressed air consumption: 0,05 l/min working pressure: 6-8 bar overall dimensions: 2.050 x 600 x 1.400 mm This model is specially designed for the users requiring high production and considerable working speed also when using difficult materials. - stepless change of heater oscillation angular speed, independent of the linear feeding speed - accurate adjustment of the feeding friction pressure - adjustment of the starting point and stop point - thread heating by electric resistance - amperometer on the control panel for an accurate adjustment of the heating temperature - zig-zag height adjustment - automatic breaking of the thread - all functions are operated on the con ...

Veneer jointing guillotine, hydraulic Brand: Casati Type: TO/CC 3600 New machine Technical data: Cutting length: 3.600 mm Daylight opening of the clamping beam: 100 mm Max. rear feed width 800 mm Min. rear feed width 25 mm Hydraulic unit motor power 10 PS Rear feed motor power 0,5 PS Equipped with: - Motordriven feed of the back fence - Cutting edge light - Millimeter counter - Manual and automatic working cycle. The operator can choose between: manual working cycle (separated controls for each phase of the working cycle) or automatic working cycle (one only push-button control for the whole cycle) - hydraulic control valve of speed and pressure of knife beam and clamping beam - central system of lubrication - knife made with special steel - angular fence - Photocells and guards as per EC rules Options for an extra charge - Photo cells and guards ...

Basic machine complete with: - with automatic feed - circular saw unit 2,2 kW (3 hp) with pneumatic height adjustment - Axial mechanical adjustment of the saw, adjustment field stepless from 0 to 2 mm - high-precision double ball bearing slides for the moving parts - pressure beam controlled by two lateral pneumatic cylinders, equipped with torsion bar - plastic cable chain - connecting piece Ø 120 mm - HM- saw blade Ø 180 mm - Lubrication unit with filter complete with gearbox and pressure gauge on the air line - service tools - safety devices type: FILA 31 Usable cutting length 3.100 mm type: FILA 37 Usable cutting length 3.700mm type: FILA 43 Usable cutting length 4.300mm

Splicing machine with glue thread Make: Casati Type: Z 1000 New machine Technical details: Arm length: 1.000 mm Veneer thickness: 0,4 - 1,5 mm Feed speed: 8 - 18 m/min. Overall dimensions: 1.350 x 500 x 1.300 mm Equipped with: - Key pad of the electronic control device for the heating temperature setting - Electronic digital read-out for an accurate monitoring of the heating temperature - Handwheel of the motor speed control for the stepless adjustment of feed speed - Knob of the motor speed electronic control for the stepless adjustment of oscillation angular speed of the heating arm independent of the linear feeding speed (zig-zag pitch) - Glue thread heater by electric resistance - Electronic adjustment of the heating temperature of the thread with accuracy ± 1°C - Electronic unit with stored control program - Separating fence with pressure wing - Holder of t ...

Veneer press - School press - Test press JOOS HP-45 YOC 1991 Pressing area: 180 x 90 cm New cover plates (anodised aluminium) Opening width: 39 cm 4 hydraulic cylinders each with a diameter of 65 mm Operating pressure: 325 bar Press pressure: 450 kN Spec. Pressure: 2.7 daN/cm² Ges. Connected load: 10.7 kW (rated current: 28.22 A) Power per heating plate: 4,700 W Circumferential safety step strip inside + outside (emergency stop) Swivel control unit All 4 hydraulic cylinders have been resealed (new seal kit) External dimensions: approx. 220 x 110 x 191 cm (LxWxH) Weight: approx. 1,980 kg

Code: 0063 Brand: MONGUZZI Model: TRA-OLM 2600 - CE Standard Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy structure essential to guarantee a precise and quality cut Pressure and lowering speed of the presser and blade holder independently adjustable via hydraulic valves Cutting length mm 2650 Presser opening mm 80 Cutting execution time 4 sec Presser width mm 340 ideal for blocking any type of veneer Cutting display light Photocells and safety barriers Installed power Kw 10 Work surface height mm 930 Automatic numerically controlled rear register with programs Sliding on quality linear guides Side button panel for processing the end cutting side Rear safety nets Overall dimensions of assembled machine mm 4100 x 2450 x 1750 h Machine dimensions for transport mm 4100 x 1800 x 1750 h Weight kg 4000

Code: 0062 Brand: KUPER Model: FW / J 900 Thread splicer for veneer Technical Data Reach mmm 920 Feed 15 mt/min Motor power Kw 0,18 Electrical connection v. 380/50 Total installed power Kw 0,45 Heating 200 watt Compressed air 6 bar Overall dimensions mm 1350 x 580 x 1600 h Weight kg 185

Code: 0059 Brand: KUPER Model: HFZ 4 - CE Standard Zig-zag veneer hand gluer - CE Standard Technical data: Voltage 220 single-phase Spool of glue thread K12 Ideal for splicing small quantities of veneer with glue thread Weight kg 1,9

Veneer Assembling Machine Haug (Ref. No. 527-2735) L x W x H: 0.6 x 1.0 x 1.2 m Weight approx. 200 kg The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Veneer joining machine Scheer Cutting length 2500 L x W x H: 3.0 x 1.2 x 1.5 m Weight 300 kg The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Manufacturer: Josting , Type: QFS 800, Year: ca.90, Program: yes, Pressbalkenöffung mm: 800, Handverstellbarer Laser: yes, Schnittbreite min-max mm: yes, Working hight mm: yes, Alignment light: 5000 X 1200 X1600, Digital readout lineal guide: 2000, Randverstärkung Leimpfaden: mit Automascher Längenerkennung über Luminizenkamera/über Kreidestriche, Year :ca.90

Manufacturer: Hymmen, Type: AS 260, Year: 1973, Longitudinal cutting guillotine: yes, Double knife: no, Cutting lenght mm: 2.600, Motor-driven kinfe beam: yes, Year :1973

: Josting, : QD1, : 1981, : yes, : 800, : 45, : yes, : yes, : 1200 x 800 x 1600, : 500, : yes,

Manufacturer: Fleck Söhne, Type: DG 46, Year: 2007, Cutting lenght mm: 4600, Year :2007

Manufacturer: Josting , Type: EFS, Year: 1968, Control: hand, Longitudinal cutting guillotine: yes, Pressbalkenöffung mm: 60, Cutting lenght mm: 2800, Schnittbreite min-max mm: 500, Working hight mm: 30, Alignment light: yes, Digital readout lineal guide: yes, Motor-driven kinfe beam: yes, Motorized stop adjustment mm: yes, Knife drive: Elektro, Year :1968

Manufacturer: Friz , Type: Profi PWP 120/42, Year: 2006, Control: yes, Suitable for veneer and paper: 2D Folie, Film width mm: 450, Gluing system Pu: PUR, Feeding speed min-max m/min: 6 - 40, Feeding speed continous adjustable: yes, roller diameter mm: 152, Work piece width min-max mm: 10 - 450, Min.-max. workpiece length in mm: min 2500, Min.-max. workpiece height in mm: 6 - 150, Overhauled on: 35 Betriebsstunden, Year :2006

Manufacturer: Fischer Rückle, Type: Omnimaster, Year: 2007, Working width mm: 1200, Veneer thickness min mm: 0,5, Veneer thickness max. min: 1,6, Feeding speed max m/min: 10-60, Feeding speed continous adjustable: yes, Thread heating: yes, Total power kW: yes, Wight approx. kg: ca.10, Required space L x W x H mm: 1500, Year :2007