used Universal processing centres for sale

Das Zentren nicht benutzt (Die Pandemie Änderte die Pläne). Das Zentren wurde im Jahr 2020 nach Deutschland gebracht. Accuway Misteiner der besten Hersteller in Taiwan. der Maschinen in die ganze welt liefert Controller Fanuk 0i Spindle speed 10000 rpm Spindle nose taper BT40 Bearing inner diameter 70mm drive system Belt (Direct) X-axis travel 850mm Y-axis travel 550 mm Z -axis travel 150-700 mm Table dimension 1100x600 mm T-slot 5x18x100 Max. weight on table 1000 kg FEED RATES X-axis travel 30 m/min Y-axis travel 30 m/min Z -axis travel 30 m/min Cutting feed rate 12 m/min AUTOMATIC TOOL CHANGE SYSTEM tool magazine capacity 24 pcs Max tool weight  ...

test par revente

Inv. Num. : 6913 Type: DBZ Producer: AXA Created: 2003 Parameters: Control system: Siemens 840 D Work table length: 1350 mm Work table width: 500 mm Maximum table load (uniform): 550 kg Spindle drive power: 55 kVA Maximum spindle speed: 12,000 1/min X-axis travel: 2x 750 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Machine height: 3500 mm Machine length: 6000 mm Machine width: 3500 mm Machine weight: 10,000 kg Equipment: Technical Documentation Tools Tool Holder 6 pneumatic vises

z-motion: 250 mm, x-motion: 420 mm, y-motion: 300 mm, control: CNC 400, table surface area l x w : 600 x 300 mm, taper: MAS BT 30, toolchanger positions: 10, turning speed range: 6 - 6000 rpm, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 1,650 x 1,700 x 2,100 mm

z-motion: 250 mm, x-motion: 420 mm, y-motion: 300 mm, control: CNC 400, table surface area l x w : 600 x 300 mm, taper: MAS BT 30, toolchanger positions: 10, turning speed range: 6 - 6000 rpm, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 1,650 x 1,700 x 2,100 mm

Description:  ,z-motion: 250 mm, x-motion: 420 mm, y-motion: 300 mm, control: CNC 400, table surface area l x w : 600x300 mm, taper: MAS BT 30, toolchanger positions: 10, turning speed range: 6-6000 rpm, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,800 x 2,100 mm

z-motion: 250 mm, x-motion: 700 mm, y-motion: 300 mm, control: CNC 500, table surface area l x w : 800 x 300 mm, taper: MAS BT 30, toolchanger positions: 10, turning speed range: 6 - 6000 rpm, weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 2,300 x 2,400 mm

z-motion: 250 mm, x-motion: 700 mm, y-motion: 300 mm, control: CNC 500, table surface area l x w : (2x) 350 x 300 mm, taper: MAS BT 30, rapid motion: 6 - 6000 m/min, weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 2,300 x 2,400 mm

z-motion: 250 mm, x-motion: 700 mm, y-motion: 300 mm, control: CNC 500, table surface area l x w : (2x) 350 x 300 mm, taper: MAS BT 30, rapid motion: 6 - 6000 m/min, weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 2,300 x 2,400 mm

Inv. Num. : 6929 Type: S82TT Producer: BUMOTEC Created: 2002 Parameters: Control System: Fanuc OIMB CNC X-axis travel: 250 mm Y-axis travel: 120 mm Z-axis travel: 170 mm Minimum vertical spindle speed: 20000 1/min Cone: ISO 10 Machine height: 1738 mm Machine length: 2220 mm Machine width: 1236 mm Machine weight: 850 kg

x-travel: 1250 mmy-travel: 880 mmz-travel: 800 mmtotal power requirement: 56 kWweight of the machine ca.: 14300 kgdimensions of the machine ca.: 5500x300x3100 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: Heidenhain 430 tool taper: SK 40 spindle speed:: 20- 9.000 spindle drive: 13/9 kWfeed speeds: 10.000 mm/minrapid traverse: 12 m/mintool change unit: 16 SK 40table-size: 700 x 500 mmswival range +/-: +95/ - 10 °Dimensions (HxWxD): 2,86 x 1,6 x 2,45 mmweight of the machine ca.: 3,0 tCNC- machining centre with manuell tilt and turn table- position tilt and turn table on the display, movable with hand wheel- automatic lubication- Tool changer- elec. handwheel- full coveredThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Working range Axis travel X-axis: 1,800 mm Axis travel Y-axis: 2.000 mm Axis travel Z-axis: 1.100 mm Control Heidenhain TNC 430 NC Rotary Table Pallet size: ,1,400 x 1,600 mm Max. workpiece weight: ,3,000 kg Number of pallets: 2 Tooling system Tool magazine: ,120 places Tool holder: SK50 DIN 69871 Machining head Swiveling milling head (H/V) Main drive Drive power: 30 kW Speed range: 1 - 8.000 min-1 Additional equipment Internal coolant supply: 40 bar Workpiece measurement: Renishaw Tool identification: Balluff Manual control unit Please have a look at our machine video and technical documentation in PDF for more information. The machine has already been prepared for removal and is being sold as defective for a refit. The machine must be collected in week 14!z-motion: 1,100 mm, max. workpiece weight between centers: 3,000 kg, x-motion: 1,800 mm, y-m ...

Lid Maho DMC-200 U serie 1512 5-axis CNC universal machining center, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameter x height: 1950x1100 mm Travel X-axis: 1800 mm Travel Y-axis: 2000 mm Travel Z-axis: 1100 mm C-axis table rotation: 360° B-axis travel: -7/187° Spindle speed: 18000 1/min Spindle cone: HSK-A63 Spindle motor: 28/19 kW Magazine capacity: 120 Required footprint: 11200x12300 mm Height: 4375 mm Weight: 58000 kg For any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

Description: Machine no.: 15175181714 3rd + 4th axis B - axis +/- 100° C - axis nx 360° Integrated rotary table Clamping surface rotary axis ø 750mm Centering bore ø 30H6 Tool cooling IKZ Operating hours Spindle hours 6860.84 hrs. Machine hours 19178.97 hrs. Chip conveyor Dimension 5890x1030x1550 mm Scraper belt width 510 mm Weight 770 kg Belt filter system Dimension 1700x1400x1850 Filling volume 600l weight 550kg Measuring system via fiber optics and motor measuring system including DECKEL MAHO 3D quickSET Exchange Display and keyboard 2022 Tool changer/ gripper 2022 For further technical data, please take a look at the PDF and watch the video to the machine. Attention ! ,The fixed collection date for this item can only be individually communicated by the logistics department after the end of the auction and beginning of the dismantling work. Crane loading!z ...

Description: Serial number 11180001663, power 51 KVA, read operating hours 50,521, read spindle hours 16.826, maximum tool diameter with all pockets occupied 100 mm, maximum tool diameter with free adjacent pockets 160 mm, maximum tool length from spindle nose without tool breakage monitoring 450 mm, maximum tool length from spindle nose with tool breakage monitoring 390 mm, maximum tool weight with automatic tool change 10 kg, maximum total tool weight in the magazine 100 kg, including the tool holders located on the tool changer as well as tools, a coolant system and a chip conveyor, Attention: two trucks are required for transportation, one with an extended transport width of 3000 mmz-motion: 800 mm, max. workpiece weight between centers: 2,000 kg, x-motion: 1,250 mm, y-motion: 880 mm, control: Heidenhain TNC 430, table surface area l x w : 1250x1000 mm, taper: SK 40, toolchanger posi ...

Universal machining center for processing 5 pages Machine in version "increased machine accuracy" Travel x-axis 1250 mm y-axis 880 mm z-axis 800 mm Automatic swivel milling head horizontal position/ vertical position B-axis 360,000 x 0.001° Table size 1250 x 1000 mm workpiece weight 2000 kg Rapid traverses x/ y/ z 40 m/min Feed speed 15,000 mm/min Motor spindle speed range up to 10,000 1/min Drive power at 40% /100% ED 30/ 20 KW Spindle torque at 40 /100% ED 285/ 190 Nm ----- Tool magazine 60 tool positions Tool holder SK 50 ----- Space requirement machine with production package length x width x height 7.4 x 5.9 x 3.1 m weight of the machine ca. 14.800 kg Heidenhain TNC 430 IKZ 40 bar Conveyor Coolant system Probe Oil and emulsion mist separators Various tool holders SK50

Inv. Num. : 7305 Type: DMU 200 P Producer: DECKEL MAHO Created: 2002 Parameters: Control system: HEIDENHAIN Duty cycle: 76912 h Hours: 8991 h Work table length: 1700 mm Work table width: 1400 mm Maximum table load (uniform): 5000 kg X-axis travel: 1800 mm Y-axis travel: 2000 mm Z-axis travel: 1100 mm

Travel X/Y/Z 780 /560/560 mm Speed 12000 1/min Tool magazine for 60 tools SK40 2-fold pallet changer 630x500 mm NC rotary table Swivel head IKZ 40 bar Renishaw Probes Filter system Zero point clamping system in the table, Coolant reservoir Conveyor

Control: Siemens Travel X/Y/Z: 350 x 240 x 340 mm Spindle speed 6300 min-1 Tool holder SK 40 Manual swivel rotary table Tool holder Vice Accessories

Control: Heidenhain Mill Plus Year of construction 2011 Cutting time : 7200 h Availability : March 2024 Location : Production Sweden Technical details: x-travel: 880 mm Y-travel: 630 mm z-travel: 630 mm Table clamping surface: Ø 700 / 1,250 x 700 mm Rotary table : 700 mm integrated max. table load: 650 kg C-axis : 360° , NC axis max. workpiece diameter: 850 mm max. workpiece height: 550 mm Milling spindle Speed range - main spindle: max. 12,000 rpm / -1 Drive power - main spindle: 15/ 10 kW Max. torque: 130 / 87 Nm Tool holder: BT 40 B-axis (NC-axis) swivel : +30° / -120° Number of tool positions: 32 positions Tool holder: BT 40 max. tool diameter: 80 mm max. toolthrough. with free adjacent box.: 160 mm max. tool weight: 8.0 kg Changeover time span - span: 10 sec Feed speed: max. 30,000 mm/min Rapid traverse: 30 m/min Acceleration: 5 m/s² Tota ...

1Universal machining center DMG-Mori DMC 80 U Duoblock built in 2007 Control Heidenhain Mill-Plus IT Travel X/Y/Z 800 mm x 800 mm x 800 mm Universal milling head with B-axis HSK 63A with 18,000 rpm NC rotary table C-axis with pallet carrier Tool changer with 180 places Rotary pallet changer d 800 mm x 630 mm IKZ with 2 pressure levels 40/80 bar , 980 l Conveyor Infrared Probe Heidenhain TS 640 Rinsing gun, electr. Handwheel , mode 4

x-travel: 800 mmy-travel: 700 mmz-travel: 600 mmturning speeds: 12000 1 U/min: control: Heidenhain total power requirement: 59 kWweight of the machine ca.: 10,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmControl: Heidenhain TNC 430 total power requirement: 26 kWweight of the machine ca.: 6500 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmtable surface area: 500 x 380 mmtable load: 200 kgtool taper: SK 40 spindle turning speed range: 20 - 18000 U/minfeed range: 20000 mm/minrapid travel x/y/z: 80/50/50 m/minno. of tools in the magazine: 60 Stücktool diameter: 80 (130) mmtool length - max.: 300 mmweight of tools max.: 6 kgpower capacity: 25 kWDimensions (LxWxH): 3,14 x 2,26 x 2,52 mweight of the machine ca.: 6,5 tUsed 5-axis machining centre CNC control HEIDENHAIN iTNC 530 2-axis NC-swivel-type rotary table, B-axis 0-161,955 deg., C-axis 360 deg. 60-position tool changer 3D infrared measuring probe Coolant unit with paper band filter system Coolant through spindle Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  CNC controls HEIDENHAIN MILLPLUS IT WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 5   .. among of them simultaneous CNC axes: 5   X-axis travel: 1080 mm  Y-axis travel: 710 mm  Z-axis travel: 710 mm  rotating range B-axis from: -91 °  rotating range B-axis up to: 12 °  rotating range C-axis from: 0 °  rotating range C-axis up to: 360 °TABLE  table surface (left-right): 1500 mm  table surface (front-back): 800 mmSPINDLE / HEAD  spindle type: tilting head   spindle revolutions (max): 12000 /min  tool fixture: ISO SK 40 TOOL MAGAZINE  number of positions: 32 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS &nb ...

x-travel: 800 mmy-travel: 700 mmz-travel: 600 mmControl: Heidenhain 426 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7394 Type: ecoMill 70 Producer: DMG Created: 2016 Parameters: Maximum spindle speed: 12000 1/min X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 520 mm Machine weight: 7,800 kg Equipment: Workpiece probe Tool Probe

with CNC-path-control: HEIDENHAIN type: iTNC 530 for axes: 5 x-travel: 800 mmy-travel: 800 mmz-travel: 800 mmb-axis: -30/+180 °c-axis: 360 °table-size: 800x630 mmworkpiece weight max.: -1200 kgtool magazin:: 120 max. tool diameter: 100 mmmax. tool-dia with free toolbox: 160 mmmax. tool length: 450 mmmax. tool weight: 15 kgspindle taper: SK40 spindle turning speed - stepless: -1200 U/minpower capacity: 32/44 kWrapid traverse: 60 m/minfeed stepless: 10-20000 mm/mindimensions of the machine ca.: 6.1x4.3x3.06 mweight: 21 tCoolant through spindle: pressure: 40 barTool breakage control device: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Heidenhain iTNC 530 x-travel: 450 mmy-travel: 400 mmz-travel: 480 mmb-axis: -95/+30 °c-axis: 360 °spindle turning speed - stepless: 12000 U/minweight of the machine ca.: 4.5 tdimensions of the machine ca.: 2.4 x 3.0 x 2.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmb-axis: -30/+120 °c-axis: 360 °spindle turning speed - stepless: 12000 U/minweight of the machine ca.: 12.8 tdimensions of the machine ca.: 303 x 395 x 367 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6525 Type: ULTRASONIC 20 linear Producer: DMG MORI Created: 2011 Parameters: Control system: SIEMENS 840 D Hours: 45663 h Switch-on hours: 24835 h Work table length: 190 mm Work table width: 190 mm Maximum table load (even): 10 kg Maximum vertical spindle speed: 42000 1/min X-axis travel: 200 mm Y-axis travel: 200 mm Z-axis travel: 280 mm A-axis: 10-130 Cone: HSK 32E Number of all tools: 24 pieces Rapid traverse X/Y/Z: 40 m/min Axis C: 360 Equipment: IKZ EROWA Clamping System Blum touch probe Blum Laser Measurement Oil mist separator Tools Tribos Tool Clamping Device

Control Siemens 840D sl Operate Travel X/Y/Z 200/220/280 mm Spindle speed 42,000 min-1 Tool magazine for 24 tools HSK E32 NC Swivel/Rotary Table IKZ Probe Paper Tape Filter Vacuum Conveyor

x-travel: 1.600 mmy-travel: 1.250 mmz-travel: 1.000 mmControl: SIEMENS 8400 Powerline 3D numbers of pallets: 6 size of pallet: 1.250 ×1.000 mmT-slots: DIN 55201-A2 c-axis: 0,001 °spindle: 85/65 kWspindle (milling):: 0,000 rapid travel x/y/z: 60.000 mm/mintool adaptor: HSK-A 63 DIN 69893 Speed: 20-30.000 U/minturning tools travel - vertical: 40/32 mmtool magazin:: 120 Internal cooling system: 50 barChip coveyor: Inkl. handwheel: SIEMENS 840D total power requirement: 139 kWAweight of the machine ca.: 55 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 universal machining center DMG-Mori DMU 60 Evo Linear built in 2013 Travel X/Y/Z 600 mm x 500 mm x 500 mm Control Heidenhain ITNC 530 HSCI NC swivel rotary table 600 mm x 500 mm Swivel range B-axis -5° to + 110° C-axis 360° incl. table cooling Spindle speed 20 -18 000 rpm HSK 63 A Tool magazine with 60 slots Infrared Probe TS 649 Laser Tool Measurement IKZ with 40 bar, chip conveyor Electr. Handwheel.

x-travel: 1500 mmy-travel: 1000 mmz-travel: 700 mmnumber of tools: 8 spindle turning speed range: 4200 U/mintable-size: 1500 x 1000 mmcapacity: 20 kVArapid traverse longitudinal and cross: 30 m/minrapid traverse Z-axis: 20 m/mintool taper: SK 40 Boring power: 40 mmthread - module: 24 mmControl: MITSUBISHI MMI table height: 780 mmmax. dist. between floorpl. and spindle-nose: 670 - 1320 mmmax. distance between table and spindle-nose: 180 - 830 mmtotal power requirement: 11 kWweight of the machine ca.: 6 tdimensions of the machine ca.: 3,9 x 2,2 x 3,27 mChip Conveyor: : Coolant System: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

a well-preserved CNC portal milling machine Dörries Scharmann] type FZ 25, built in 1994, table 6000 x 2500 mm, travel distances X/Y/Z 6000/2500/2000 mm, portal passage 3000 mm, table load approx. 40 tons, with automatic milling head change. CNC control Heidenhain TNC426, dimensions approx. 18 x 8 x 7 m, weight approx. 174 to.

Description: Cuts the 6m PVC profiles, then manually inserts the steel reinforcement into them, the machine then screws them in, drills holes for decompression, hinges and mounting, and mills the drainage grooves. It is programmed for Profine profiles -Trocal 76AD, 76MD, 88MD. It can be reprogrammed to any profile. The total dimension of the folded machine is 17x9,2 m. About a year ago dismantled by Elumatec and stored. Everything should be functional. Video before disassembly attached. Requires 2 trucks with a loading area of at least 12m for transport. And one 8m. , It's not heavy in weight,but there are a lot of tables that can't be put on top of each other.weight approx.: 14,300 kg, Approx. Onsite Dimension. (l x w x h): 32,000 x 2,200 x 2,300 mm

CONTROLS  CNC controls HEIDENHAIN TNC 640 WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 5   X-axis travel: 640 mm  Y-axis travel: 250 mm  Z-axis travel: 400 mm  rotating range B-axis from: 105 °  rotating range B-axis up to: -105 °  rotating range C-axis from: 0 °  rotating range C-axis up to: 360 °  distance spindle nose - table surface (max.): 450 mmTABLE  workpiece load (max): 60 kgSPINDLE / HEAD  spindle revolutions (max): 42000 /minTOOL MAGAZINE  number of positions: 90 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2400 mm  space requirements -front/back-: 2370 mm  total height: 30 ...

Description: Brand: FomIndustrie Type: ADIR C Serial Number: A1222375 Production Year: 2019 Machine Specifications: 3 Axes CNC Machining Centre Rotating Worktable: 0°/90°/180° Axes Travel: X-Axis: 2675 mm Y-Axis: 355 mm Z-Axis: 224 mm Axes Movement: X-Axis: 25 m/s Y-Axis: 13 m/s Z-Axis: 11 m/s Manual Tool Replacement Time: 17 seconds Spindle: Cone: ISO 30 DIN 69871 Max Power: 2.2 kW Tool Rotation: 12,000 rpm Tooling: Number of Tools in Deposit: 6 Max Tool Weight: 2 kg Max Tool Length: 130 mm Max Tool Diameter (Cylindrical Milling Cutter): 20 mm Dimensions: Length: 3600 mm Width: 1660 mm Height: 1900 mm Weight: 1422 kg Note: Machine has no control program ,z-motion: 224 mm, x-motion: 2,675 mm, y-motion: 355 mm, taper: Iso 30, toolchanger positions: 6, power capacity - spindle: 2.2 kW, turning speed range: 12,000 rpm, weight approx.: 1,430 kg, Approx. Onsite Dimension. ...

Inv. Num. : 6849 Type: VF 2SS Producer: HAAS Created: 2019 Parameters: Duty cycle: 6825 h Hours: 2885 h Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum spindle speed: 12000 1/min Minimum distance between the spindle axis and the table: 102 mm Maximum distance between the spindle axis and the table: 610 mm X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Spindle power: 22.4 kW Equipment: Grip SK40 (10x) Probe Renishaw

Description: Serial number 28133 , Diameter of the rotary table 250 mm , Including fully integrated swivel rotary table, as well as the tool holders and tools located on the tool changer z-motion: 635 mm, x-motion: 1,270 mm, y-motion: 508 mm, control: HAAS, table surface area l x w : 1310x455 mm, taper: BT 40, toolchanger positions: 20, turning speed range: 8,000 rpm, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 2,800 x 3,000 mm

Manufacturer : Hermle Model: C 30 U Number of machines : 1 Control : Heidenhain i TNC 530 Year of construction : 2008 / 2009 Switch-on hours : approx. 95000 h Spindle running time : 28000 h Location : Germany from stock Hultfred - Sweden Specifications Max. spindle speed: 28000 rpm Spindle mount : HSK A 63 Number of synchronously controlled axes : 5 Travel X-axis : 650 mm Y-axis : 600 mm Z-axis: 500 mm A-axis : +/- 115 º MM B-axis : 360° NC serving table diam. 280 mm Tool Locations Pick Up: 32 Positions Additional magazine: 157 lots Total tool slots : 189 lots Loading and unloading area: 8 lots Tool length max.: 300 mm Tool diameter max. 125 mm Tool weight max.: 8 kg Dimensions Length : 3154 MM Width : 2354 MM Height 2892 MM Machine weight : 10500 KG Other equipment features - max. coolant pressure 80 bar possible ( IKZ ) - Touch probe  ...

Manufacturer : Hermle Model: C 30 U Number of machines : 2 Control : Heidenhain i TNC 530 Year of construction : 2008 / 2009 Switch-on hours : approx. 115000 h Spindle running time : 24400 h Location : Germany until week 49 / 2023 then from warehouse Sweden Specifications Max. spindle speed: 28000 rpm Spindle mount : HSK A 63 Number of synchronously controlled axes : 5 Travel X-axis : 650 mm Y-axis : 600 mm Z-axis: 500 mm A-axis : +/- 115 º MM B-axis : 360° NC serving table diam. 280 mm Tool Locations Pick Up: 32 Positions Additional magazine: 157 lots Total tool slots : 189 lots Loading and unloading area: 8 lots Tool length max.: 300 mm Tool diameter max. 125 mm Tool weight max.: 8 kg Dimensions Length : 3154 MM Width : 2354 MM Height 2892 MM Machine weight : 10500 KG Other equipment features - max. coolant pressure 80 bar possible ( IKZ  ...

Manufacturer : Hermle Model: C 30 U Number of machines : 2 Control : Heidenhain i TNC 530 Year of construction : 2008 / 2009 Switch-on hours : approx. 115000 h Spindle running time : 24400 h Location : Germany Dismantling in week 5 / 2024 then from warehouse Sweden Specifications Max. spindle speed: 28000 rpm Spindle mount : HSK A 63 Number of synchronously controlled axes : 5 Travel X-axis : 650 mm Y-axis : 600 mm Z-axis: 500 mm A-axis : +/- 115 º MM B-axis : 360° NC serving table diam. 280 mm Tool Locations Pick Up: 32 Positions Additional magazine: 157 lots Total tool slots : 189 lots Loading and unloading area: 8 lots Tool length max.: 300 mm Tool diameter max. 125 mm Tool weight max.: 8 kg Dimensions Length : 3154 MM Width : 2354 MM Height 2892 MM Machine weight : 10500 KG Other equipment features - max. coolant pressure 80 bar poss ...

Control Heidenhain TNC 426 Travel X/Y/Z: 600/450/450 mm Spindle speed 10,000 min-1 Tool magazine for 30 Wkz., SK 40

Control: HEIDENHAIN TNC-430 x-travel: 800 mmy-travel: 600 mmz-travel: 500 mmB-axis (table): 280 mmtable swivelabel +/-: 220 (+/-110) °-C-axis table rotating: 360 °tool magazin:: 30 spindle taper: HSK63 spindle turning speed - stepless: -15000 U/minrapid traverse feeds rotary table: 36 U/minrapid travel x/y/z: 36 m/minOverall size: 3800X3600X3000 mmweight of the machine ca.: 8.5 tCoolant through spindle: pressure: 40 Bar3D measuring tracer: RENISHAW Chip conveyor: Coolant installation: SIEMENS 840Dwww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Complete with documentsz-motion: 420 mm, x-motion: 600 mm, y-motion: 400 mm, control: HEIDENHAIN TCT 410, taper: ISO 40, weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 3,000 x 2,000 mm

Description: Incl. 2 machine vices is sold as defective without CEz-motion: 450 mm, max. workpiece weight between centers: 350 kg, x-motion: 660 mm, y-motion: 350 mm, control: Hurco Ultimax, table surface area l x w : 760x350 mm, taper: BT40, toolchanger positions: 16, turning speed range: 10,000 rpm, weight approx.: 3,200 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,900 x 2,600 mm

Inv. Num. : 6594 Type: VMX 42 SR Producer: Hurco Generated: 2008 Parameters: Control system: Winmax Work table length: 1270 mm Work table width: 610 mm Maximum table load (even): 500 kg Speed: 12000 1/min Travel X-axis: 1066 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Cone: SK40 Machine weight: 7550 kg Equipment: C-axis: CNC rotary table B-axis 2016: new spindle