saws used for sale

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 38700 €: 785.61 €: Doppelsäulenführung : 8200x41x1,3 mm: 20-100 m/min: 810 mm: 810 mm: 850x810 mm: rund 480 mm, quadrat 480 : 585 mm: 1.5 kW: 4 kW: 0.12 kW: 3900 mm: 1200 mm: 2350 mm: 3080 kg2° inlined saw bandoptical height adjustmentlinear guidescontrol panelsecurity switchpressure adjustmenthydraulic vicechip brushhydromechanical blade tensioningcoolant pumpheavy duty gearbox1,2 m roller tableuser manual in GERMAN or ENGLISHOPTIONS:turn table for mitre cutshydraulic top clamping from aboveroller tables and band saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible.

: neu : 2023 : 6246 : prompt, Zwischenverkauf v : Italien : 3449 €: 1 : 300 mm: 300 x (2)2,5 x 32 mm: 33/66 U/Min: 45 °: 45 °: rund 102 mm, Quadratprofi : rund 90 mm, Quadratprofil : rund 80 mm, Quadratprofil : 500 mm: 1050 mm: 990 mm: 135 kgdemo machine / mint conditionnet pricevice with quick clamping device and additional clapming strip for reduced cuttinag burrreduction gear and clutch to save the gear and sawing bladescoolant equipmentsaw blade protectionmaterial gaugepedestal1 saw bladeoperating manual in German or EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 750 mm

Kaltenbach, HCM 750, Cutting area: dia. 220mm, U/I beam : 400 x 150 , Feed rate: 0- 500mm/min , Drive motor: 5HP, 1700kg, sgt. Condition.

weight of the machine ca.:1750 kgsawing motor:2,2 kWtotal power requirement:5 kWcutting speed:17 - 90 m/mincutting diameter:320 mmcutting range max.:320 x 320 mmsaw band length:4.930 x 34 x 1,1 mmfeed length:max 9x 600 mmdimensions of the machine ca.:2,6 x 2,4 x 1,40 mBandsaw automatic, straight cut,min. cutting diameter 10mm,min. cutting length 6mm,min. offcut 15mm (automatic 80mm),max. weight of material 400kg/m,coolant box 60l, pump 16l/min,clamping pressure 20-60bar,dimensions:chipconveyor 2.400x 950mmroller track 2.200 x 950mm,5pcs. saws (new) 4.930 x 34 x 1,1mm operating manual,

cutting diameter:330 mmsaw band length:4680 mmsawing motor:4 kWcutting speed:15 - 100 m/minsquare:330 x 500 mmcutting length min.:10 mmcutting lenght max.:850 (-9999) mmtotal power requirement:7,7 kWweight of the machine ca.:5,5 tspace requirements approx. LxWxH:2,7 x 2,35 x 1,7 mAutomatic horizontal bandsaw, hydraulic,material dimension max.:dia 330 mm,rectangular 330 mm x 500 mm,dimension of bandsaw 4680 x 34 x 1,1 mm,incl. roller track

cutting diameter:242 mmsaw band length:2965 mmtable height:940 mmcapacity 90 degrees: round:242 mmcapacity 90 degrees: flat:242 x 150 mmcapacity 90 degrees: square:242 x 242 mmclamping head::280 mmcutting speed:25 - 90 m/mintotal power requirement:2,5 kWweight of the machine ca.:0,4 t- cooland device- cutting speed 25 - 90 m / min. - saw dimension 2965 mm x 27 mm - saw blade guide made of hard metal- roller track for material 2.000 mm left side / 1.000 mm right side

cutting diameter:320 mmsaw band length:3280 mmcutting width:320 320 mmtotal power requirement:3,8 kWweight of the machine ca.:1150 t- columm guidance- roll-conveyer 4000mm / 1000 mm lenght- cutting speed 15 - 105 m / min

Max. Cap. flat 240 mm; v.v. (2x) material clamping device

Detail: 12x wood, 5x wood and nails, 15x metal

Cutting capacity at 90 degrees around 180 mm, rectangle 180x300 mm; engine power 1HP; on mobile chassis

cutting diameter:520 mmsaw band length:7239 x 50 mmcutting width:520 mmsawing motor:5,5 kWcutting speed:20 - 130 m/mintotal power requirement:9,5 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3,5 x 2,2 x 2,1 m- Multifeed device- infeed roller stand- chip conveyor- automatic operation

equipped with chip removal and roller conveyors

cutting diameter:400 mmsaw band length:5090 x 34 mmcutting width:1,1 mmcutting speed:20 - 110 m/mintotal power requirement:4 kWweight of the machine ca.:2 tdimensions of the machine ca.:2,4 x 2,5 x 1,9 mdouble column guided bandsaw for with multiple feedinf. variable cutting feedhydr. belt tentioningroller conveyor for material handlingchip conveyor and coolant attachment

Equipped with cooling lubrication device, saw adjustable 0- 45°, quick-release clamp, hydraulic saw tensioner, collection tray and adjustable feet

Air power supply ,air clamping

cutting diameter:520 mmsaw band length:7239 mmcutting width:520 mmsawing motor:5,5 kWcutting speed:20 - 130 m/mincutting width at rectangle material:520 mmtotal power requirement:9,5 kWweight of the machine ca.:3,8 tMachine with multi feed devicechip conveyorinfeed roller stand

equipped with foot control

100 % before loadingwarranty:none

Equipped with material clamp, roller supports

All dimensions are approx; With 2 saw blades;