Sandblaster COMO type LC 05 Year of construction: 1987 Internal dimensions: Width 790 x Depth 590 x Max Height 650 mm Opening of the 2 sides possible Equipped with 1 integrated dust vacuum cleaner Voltage: 380 V Width: 900 mm Depth: 1200 mm Total height: 1700 mm Weight: approx 200 kg
Blasting container for blasting glass beads, ceramic balls, grnat sand, hard cast gravel with conveying floor, abrasive preparation, blasting device, filter system. Internal dimensions L=5850 B= 2300. Side Door Open for easy loading with the forklift
Blasting house with extraction floor for mineral abrasives (glass, ceramics, corundum, garnet sand and so on). Magnetic separator, cyclone, preparation, material bunker, abrasive refill, free jet pressure blower, filter system with cleaning. Lining of the walls with 4mm fabric rubber
Blasthouse components as a kit for self-assembly or by assembly by our specialist personnel. Flat conveying floor, transverse screw conveyor, bucket elevator, wind screening, sieve, abrasive bunker, blasting device, filter system, blow-in system, suction wall and electrical control.
BLASTING MACHINE WITH ROLLER CONVEYOR Shot peening machine Manufacturer: GIETART Type: 8739 Type: Roller conveyor workpiece width: 1500 mm workpiece height: 550 mm workpiece weight: 600-800 kg/m
through-put width: 1000 mmworking heigth: 800 mmair consumption: 250 - 1000 l/minFilter capacity: 8 m²air pressure: max 10 bartotal power requirement: 0,55 kWweight of the machine ca.: 250 kgdimensions of the machine ca.: 2100 x 1200 x 1850 mm- Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc.- Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges- High-quality latex work gloves are firmly attached to the housing- Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film- Dust-free work due to all-round seals on the cover and door frames- Stable storage grid enables workpieces to be placed in the cabin interior- With drain opening for changing the blasting material- Suction pipe for the blasting material attache ...
0: 680 x 450 x 430 mmoperating pressure: 3 - 6 barAir consumption: 250 l/min.weight of the machine ca.: 28 Kg: 0,76 x 0,5 x ,75 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 830 x 530 x 530 mmoperating pressure: 2,2 - 5,5 barAir consumption: 250 l/min.weight of the machine ca.: 50 Kg: 0,95 x 0,65 x ,7 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 410 x 310 x 380 mmoperating pressure: 4 - 8 barair consumption at 6 bar: min. 250 l/minweight of the machine ca.: 12,5 Kg: 490 x 370 x 380 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 945 x 605 x 605 mmoperating pressure: 2,2 - 5,5 bardimensions: 1,0 x 0,61 x 1,65 m: 1300 x 1000 x 750 cmAir consumption: 250 l/min.weight of the machine ca.: 0,09 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 1170 x 580 x 580 mmoperating pressure: 2,2 - 8,0 bardimensions: 1,22 x 0,93 x 1,70 mair consumption at 6 bar: 350 l/minweight of the machine ca.: 0,15 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 2060 x 1270 x 860 mmoperating pressure: 2,5 - 8,0 barair consumption at 6 bar: 350 l/minweight of the machine ca.: 0,23 tdimensions: 2,08 x 0,73 x 0,8 mDuo blast cabinet10 PET sheets to protect the windows10 PET sheets to protect the fluorescent lighting2 foot pedals2 jet guns6 ceramic nozzle inserts (6 mm diameter)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 1170 x 880 x 825 mmoperating pressure: 2,5 - 8,0 bardimensions: 1,33 x 1,24 x 1,77 mair consumption at 6 bar: 350 l/minweight of the machine ca.: 0,16 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
through-put width: 750 mmworking heigth: 750 mmworking area L-W-H: 1200 x 750 x 750 mmcompressed air: 0 - 10 barAir consumption: min. 250 l/min.work height max.: 850 mmweight of the machine ca.: 800 kgdimensions of the machine ca.: 1400 x 1200 x 1870 mmFurnishing:- Industrial sandblasting system- Working space: 1,200 x 750 x 750 mm LxWxH- Perforated metal work grid with stable support- 2x side passage openings with closure sliders Dimensions: 340 x 240 mm- 1x sectional door that opens upwards, revealing the entire blasting space- continuous jet pressure adjustment- Pressure gauge - pressure display- Front window / plexiglass- freely movable foot switch- Drain/collection container for blasting material- Blasting gun + blasting gloves Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9803037The data for this ad was created with ModulMWS - the software sol ...
1pcs gebr. Automatic blasting machine - Manufacturer: OTI Oberflächentechnik GmbH - Model: IG-P - For rotary workpieces (max. Drm. 800mm and max. length 1,500mm) - Weight: 760kg - Motor power: 4.0kW / 400V / 50Hz / 3,850m³/h / 1,800 pa - Residual dust quantity: recirculation mode < 2 mg/m³ - 4 cartridge filters à 16sqm / total filter area: 64m² - Description of the system in PDF on request - technical data according to manufacturer's information - Price on request from location We receive new items every week. Not all of them are immediately available online. However, if you are looking for something specific, you can simply send us an inquiry or feel free to call us. ------------------------ 1pc used automatic blasting machine - Manufacturer: OTI Oberflächentechnik GmbH - Model: IG-P - for rotary workpieces (max. drm. 800mm and max. ...
Receiver capacity: 40 lworking pressure: 4 - 8 barAir consumption: 250 - 800 l/min.weight of the machine ca.: 20 Kg: 770 x 415 x 365 mmMobile jet unit with extractionConsisting of:microfilterBoiler 40 litersBlasting gun with 2.5m supply hoseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Receiver capacity: 80 lworking pressure: 4 - 8 barAir consumption: 250 - 800 l/min.weight of the machine ca.: 36 Kg: 1020 x 460 x 520 mmMobile jet unit with extractionConsisting of:microfilterBoiler 80 litersBlasting gun with 2.5m supply hoseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Receiver capacity: 2 x 37 lworking pressure: 4 - 8 barAir consumption: 170 - 500 l/min.weight of the machine ca.: 36 Kg: 1020 x 460 x 520 mmMobile beam unit (soda blasting)Consisting of:Nozzle set and moisture separatorBoiler 2 x 37 litersBlasting gun with 2.5m supply hoseSoda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working space LxWxH: 750 x 980 x 980 mm Door opening LxW: 640 x 740 mm Equipped with: - New work gloves - Blast gun - Waste plant Country of origin: Netherlands Connection: 380 Volt Machine LxWxH: 1000 x 1000 x 2000 mm Machine weight: 400 kg
TEPARK KPI-115-ST500 sandblasting cabinet manufactured in Poland in 2011 is used for thorough cleaning of small and medium-sized workpieces using abrasive materials such as electrocorundum or steel shot. The cabin sandblasting machine’s structure is made entirely of welded sheet metal to ensure high durability and tightness. Inside the machine is a fully lit working chamber with a 150 kg rotary table. The total weight of the sandblast machine is 280 kg. Technical data of the TEPARK KPI-115-ST500 sandblasting machine - maximum workpiece weight: 150 kg - work chamber size (L x W x H): 1150 x 900 x 800 mm - rotary table - injector gun - chip extractor: DEDRA DED7724 - workspace illumination - pressure: 10 bar - power supply: 230 V; 50 Hz - weight of machine KPI 115 ST500: 280 kg
Sandblasting system, blasting cabin, double blasting cabin, core box blasting cleaning device used The system consists of the blasting cabin for 2 workers with extendable rotary table, work platform and control cabinet. A suction and filter system with cyclone and compressed air purification as well as the blasting device. Hesteller: unknown Type: BFA-2-2 Rotary table diameter approx. : 1,1 m max height of the workpiece: approx. 0.8 m Dimensions cabin approx. 2 x 1.8 x 3.7 m Total dimensions with entry device: approx. 4.9 x 2 x 3.7 m Dimensions pedestal: approx.: 4.9 x 1 x 1.8 m Dimensions filter: approx. 1 x 1 x 2.7 m Changes and errors in the technical data, information and prices as well as intermediate sale reserved.
through-put width: 580 mmworking heigth: 580 mmair consumption: 400 - 800 l/minworking pressure: 3,4 - 8,0 barsuction capacity: 17,4 m³/htotal power requirement: 1,2 kWweight of the machine ca.: 115 kgdimensions of the machine ca.: 1225 x 935 x 1640 mm- Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc.- Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges- High-quality latex work gloves are firmly attached to the housing- Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film- Dust-free work due to all-round seals on the cover and door frames- Stable storage grid enables workpieces to be placed in the cabin interior- With drain opening for changing the blasting material- Suction pipe for the blasting materia ...
dimensions:: innen 1160 x 580 x 580 mmAir consumption: 400 - 800 l/min.air pressure: 3,4 - 8,0 barworkpiece weight: max. 120 kgtotal power requirement: 1,2 kWweight: 115 kgrange L-W-H: 1225 x 935 x 1640 mmFurnishing:- Very large front flap that opens upwards- Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc.- With gas pressure springs for quick and easy loading and unloading- Integrated suction system with exchangeable air filter- Jet gun without a finger trigger The air flow is controlled by a foot pedal- Two fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film- Light switch with double function: suction and cabin lighting are switched on and off at the same time Regulation of the working pressure via pressure regulator with manometer- Jet head (grain size 0.125 - 0.42 mm can be used)- Container for ...
through-put width: 870 mmworking heigth: 850 mmair consumption: 400 - 800 l/minworking pressure: 3,4 - 8,0 barsuction capacity: 17,4 m³/htotal power requirement: 1,2 kWweight of the machine ca.: 160 kgdimensions of the machine ca.: 1320 x 1200 x 1760 mm- Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc.- Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges- High-quality latex work gloves are firmly attached to the housing- Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film- Dust-free work due to all-round seals on the cover and door frames- Stable storage grid enables workpieces to be placed in the cabin interior- With drain opening for changing the blasting material- Suction pipe for the blasting materi ...
dimensions:: innen 1160 x 870 x 850 mmAir consumption: 400 - 800 l/min.air pressure: 3,4 - 8,0 barworkpiece weight: max. 150 kgtotal power requirement: 1,2 kWweight: 160 kgrange L-W-H: 1320 x 1200 x 1760 mmFurnishing:- Very large front flap that opens upwards- Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc.- Integrated suction system with exchangeable air filter- Jet gun without a finger trigger The air flow is controlled by a foot pedal- Four fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film- Switch for suction and cabin lighting Regulation of the working pressure via pressure regulator with manometer- Jet head (grain size 0.125 - 0.42 mm can be used)- Cross struts on the feet easy transport with the pallet truck- Container for blasting material- dust extraction- foot switch- Operating instruct ...
0: 1250 x 1200 x 1100 mmoperating pressure: 2,5 - 8,0 bardimensions: 2,0 x 1,8 x 2,5 mair consumption at 6 bar: l/minweight of the machine ca.: 1,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sandblaster WORKSMASTER SBC 900 Internal dimensions: Width 950 x Depth 800 x Height 800 mm Sandblaster dimensions: Width 1400 x Depth 1300 x Height 1800 mm Equipped with 1 vacuum cleaner Voltage: 220 V mono Weight: 200 kg