used Plasma Cutting Systems for sale

Burn-Drilling Rig Panel Processing Center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC Control Power source Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Auto. Revolver Tool holder: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring scribing marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x400 mm with restriction ) Minimum dimensions of finished parts: 80 x 80 mm Sheet weight max.: 2,600 kg and 650 kg/m Feed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-position cross conveyor Number of cars: 2 pliers NC feed carriage, placed on the side 4 collets (2+2) 3 Short Stroke Cross Conveyors Working height: 1,000 mm Removal page: Discharge roller conveyor with lowerable unloading table with chute in Material c ...

welding current: max. 70 Acutting capacity: max. 25mm mmopen-circuit voltage: 120 VRequired air-pressure: min. 4 barconnected load: 9,2 kWconnected load frequency: 400 Vweight: 0,28 kgDimensions (LxWxH): 1,7 x 1,0 x 1,2 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 7 Meter

Machine Type: Plasma Inverter Cutting Machine without CPC vending machine connection Make Hypertherm Type Powermax 85 SYNC Serial No. 85SS-009854 Connection voltage 3 x 400 volts Adjustment range 25 – 85 amps Duty cycle 60% ED at 85 amps 100% ED at 66 amps Current adjustment infinitely variable max. quality cut at 250 mm/min 32 mm max. quality cut at 500 mm/min 25 mm max. cut-off at 125 mm/min 38 mm Cooling inverter through built-in fan Cooling burner compressed air cooled Portable compact system design Fuse 32 Amps Dimensions L x W x H 500 x 234 x 455 mm Weight 28 kg Age 18 months Condition workshop tested, very good, incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece plasma hand cutting torch 7.6 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty ...

welding current: 20 - 60 Acutting capacity: 1 - 20 mmopen-circuit voltage: 104 VRequired air-pressure: min. 4 barconnected load: 7,9 kWconnected load frequency: 400 Vweight: 16 kgDimensions (LxWxH): 480 x 260 x 360 mmDigital display.Surge protection.Plasma torch.Earth cable.Reducing valve with moisture separator.Equipped with IGBT technologyDelivered without CEE plug.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 6 Meter

Machine Type: Plasma Inverter Cutting Machine Make EP-Systems Type M 40.60 Connection voltage: 1 x 230 volts, setting range: 15 – 40 amps, duty cycle: 60 % ED at 40 amps 100% ED at 30 amps Current adjustment infinitely variable max. quality cut 2 mm max. cut-off cut 5 mm Cooling inverter through built-in fan Cooling burners by compressed air Portable assembly system design Fuse 16 amps Dimensions L x W x H 470 x 250 x 250 mm Weight 10 kg Age 5 years Condition workshop-tested new incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece plasma torch PH-70, 6 mtr. long 1 piece ground cable 1 piece compressed air hose 1 Piece Instruction Manual Warranty 12 months from the date of delivery Original price €1,750.00 + VAT Price kpl. with the above accessories €159.00 + VAT _____________________________ ...

: 6 Meterweight of the machine ca.: 1 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24820 Specifications: - Infinitely adjustable cutting current 30 - 100 A - Duty cycle 80 A / 100% ED - 100 A / 80% ED - max. cutting thickness - steel approx. 32 mm - Alu approx. 25 mm - Stainless steel approx. 55 mm - Air connection 5 bar - Gas mixing plant - Connection 400 V / max. 14.5 kVA - Space requirement approx. W 800 x H 1650 x D 700 mm - Weight approx. 250 kg

output: 30 Kvaweight of the machine ca.: 0,15 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Telemecanique NUM 720 Plasma Source Thermal Arc PAK 5 XR Work area 1,500 mm x 3,000 mm Cutting thickness range 0.4 – 6 mm Cutting accuracy +/- 0.1 mm Cutting speed max. 10 m/min Machine weight approx. 1.1 t Accessories: Computer workstation Remarks: The system is suitable for cutting sheet steel, copper, aluminum, stainless steel and other materials

welding current: 15 - 40 Acutting capacity: 1 - 16 mmopen-circuit voltage: 96 VRequired air-pressure: min. 4 barconnected load: 3,6 kWconnected load frequency: 230 Vweight: 9,0 kgDimensions (LxWxH): 371 x 153 x 232 mmExhibition machine Inverter plasma cutter with accessories:Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressuregauge, Mask and brush.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL-P 12001.20 Year of Make: 2007 CNC control 1 plasma torch with power source Kjellberg HiFocus 160i Extraction table: 2 x 12 m Donaldson Torit DCE filter system

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Easytherm 4000 Year of Make: 2005 Control: Global Control Working area: LxW: 3,000 x 10,000 mm Vibrating conveyor table 2 x Plasma Torch 2 x power source Kjellberg HiFocus 160i Filter system

Offer 24409 Specifications: - Air-cooled plasma cutter portable - Cutting current adjustable in 3 levels 45 - 85 - 130 A - Duty cycle 45 A / 100% ED - 85 A / 100% ED - 130 A / 60% ED - Cutting thickness steel quality cut approx. 35 mm - Cutting thickness steel Separating cut approx. 45 mm - Pneumatic connection 5 bar - Gas mixer PM – S 45 W - Connection 400 V / max. 38 kVA - burner package - Ground cable - Space requirement approx. W 750 x H 1050 x D 1000 mm - Weight approx. 350 kg

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2007 Control: Global Control Working area LxW: 3,000 x 14,000 mm 2 x oxy-fuel burner type ALFA Fuel gas: acetylene/oxygen 1 x Plasma Torch Power Source Hypertherm HPR260 Suction: Donaldson DFPRO 8-CYCLO Extraction table ECOTAB Plus 30145

Plasma Power Source Power Source Manufacturer: Kjellberg Type: HiFocus 160i with automatic gas console Cutting data: Grooving up to 30 mm Cutting up to 50 mm

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 100 i Supply voltage 3 x 400 volts Adjustment range 30 – 100 amperes Duty cycle 50 % ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable separation cut 50 mm quality cut 35 mm Cooling inverter by built-in fan Cooling burner compressed air cooled Portable assembly system version Fuse 32 Ampere Dimensions L x W x H 560 x 265 x 400 mm Weight with burner 24 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 105 RTX, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 3.020,00 € + VAT Price kpl. with above accessories 2.5 ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 45 i Supply voltage 3 x 400 volts Adjustment range 10 – 45 amperes Duty cycle 80 % ED at 45 amps 100% ED at 40 amps Current adjustment infinitely variable separation cut 25 mm quality cut 12 mm Cooling inverter by built-in fan Cooling burner compressed air cooled at 90 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 470 x 180 x 230 mm Weight with burner 13 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 45 TT, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List price dire ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 30 i Supply voltage 1 x 230 volts Setting range 10 – 30 amps Duty cycle 35 % ED at 30 amps 60% ED at 25 amps 100% ED at 21 amps Current adjustment infinitely variable separation cut 10 mm quality cut 8 mm Cooling inverter by built-in fan Cooling burner compressed air-cooled, 50 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 480 x 165 x 290 mm Weight with burner 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 30 H, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery Lis ...

Plasma Cutter VCS 2000, HiPerformance Plasma HPR 260 XD and suction Filtercube 4H 7500 m³/h volume flow. To be visited in operation.

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of construction: 2008 Retrofit: 2019 Suction table: 2,000 x 3,000 mm 1 oxy-fuel burner ALFA 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Omnimat L5000 Year of construction: 2000 CNC control: Fanuc Working area: 3000 x 6000 mm Extension possible 1 plasma torch with Hypertherm HT2000 power source 3 oxy-fuel burners without table without filter

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: HS 4001.25 P Year of construction: 2003 CNC control: MSNC500P Working range: 2500 x 4000 mm 1 plasma torch with power source Kjellberg HiFocus 100 Filter system Kemper 8000

• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table

CNC Portal Plasma Cutting Machine Manufacturer: Zinser Type: 2425 N Built: 2007 CNC control: CNC2050 1 plasma burner with power source Kjellberg HiFocus 160i Working area: 2x4 m Length: 6 m Table and filter on request

CONTI-WELD PLASMA CUTTING EQUIPMENT TYPE 60 H CONTI-PAC -60 amp -Snijcapaciteit in staal 20 mm -Ingebouwde luchtdrukregelaar -Met toebehoren -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)