other machinery for waste disposal and recycling used for sale

Westeria AirStar 1000 air classifier, built in 2022, new and unused Specifications: Manufacturer: Westeria Type: AirStar 1000 L2 – 20° Year of Make: 2022 Hours: 0 Connection: 460 V / 60 Hz Throughput: 80-100 m³/h Working width: 1000 mm Length of lightweight chamber: 2970 mm Belt width: 1000 mm Effective width: 822 mm Dimensions: 8869 x 2005 x 2000 mm (LxWxH) Inclusive - Extension of the lightweight chamber L2 - 20° bend - Wiring on terminal box - AirWheel 15 - AirJet Areas of application: Separation of heavy and light goods. Typical areas of application in the recycling / waste management industry include the treatment of household waste, MSW, commercial waste, e.g. for the production of substitute fuels or for pre-sorting for recycling. Note: The machine is in very good, mint condition. It was never used. No controls available. The complete documentat ...

GB: 750 mm AA: 1,590 mm Drum diameter: 320 mm 1.5 kW electric drive Magnet: 832 x 526 x 234 mm

Capacity: 56 cbm bolted segment construction with discharge chute with sturdy steel construction

6 spiral augers, total volume: approx. 55 cbm, capacity: approx. 150 cbm/h, drive 3 x 11 kW

ROTOR and STATOR knives, MILL BLADES, PELLETIZER KNIVES, perfectly compatible with major Constructors machinery, such as :, ADLER BUZZI ALPINE BANO CDM CMG CONDUX CUMBERLAND DIPRE ELDAN ENGINPLAST FBM FILTEC FOLCIERI FORREC GALA GAMMA MECCANICA GUIDETTI HERBOLD ISVE LINDNER MECCANOPLASTICA MOLINARI MORETTO NEUE HERBOLD NGR OMP PALLMANN PIOVAN PREALPINA PREVIERO PROMECO PRT RAPID RIETER SATRIND STOKKERMILL TECNOFER TECNOVA TPA TRIA VECOOPLAN VIRGINIO VMC WEIMA WERNER WRS ZERMA, or made on constructor’s design Made with top quality steel tempered in various hardness degrees in accordance to the specific task required., For PLASTICS, WOOD, WEEE, TIRES, AL, CABLES, COPPER, and more

Motor power: 55kW, length: 14,900mm, width: 6800mm, height: 4000mm, operational hours counter: 30h.

For sale: Paper recycling and sorting machine with integrated reversible conveyor belt system 1) Paper Processing Machine Manufacturer: Hartner Year of Manufacture: 2013 Operating Hours: 3500 2) Reversible Conveyor Belt Manufacturer: Hillebrand Model: 4 GB 1400 Find more here - / Contact us at -

Manufacturer: Komptech Model: MULTISTAR 2-SE Year of Manufacture: 2010 Operating Hours: 9,000 hours Capacity: Up to 150 m³/h Materials: Biowaste, Green Waste Dimensions (L×W×H): 7.8 × 3.7 × 3.0 meters Weight: ~6000 kg Screen cross-section approximately 60 mm 4 different screen cover speeds adjustable via frequency converter. Find more here - / Contact us at -

1 piece used separator Manufacturer: TiTech Type Titech AutoSort [NIR1-VIS] [S-2000] [X-H] including acceleration band Conveyor width approx. 2,000 mm AA approx. 5,000 mm

used sorting system Manufacturer: STADLER / BOA Year of Make: 2016 / ? composed of: - Feed hopper with dosing roller (BOA) - Feed belt with riser part as chain conveyor (BOA) - Climbing belt with horizontal transfer part as chain belt (BOA) - Sorting belt as a sliding belt conveyor belt (STADLER) - Sorting platform with supports, with staircases, 3 bunkers with 4 discharge shafts in the cabin and 2 discharge shafts outside the cabin (STADLER) - Sorting cabin with 4 pieces of entrance/exit doors, heating, cooling and ventilation system (STADLER) - Electrical control (STADLER) - Take-off belt for container filling as a belt conveyor belt (STADLER) - Container filling (BOA) - Electrical control for container filling (BOA) The system will be dismantled from 05.05.2025.

Technical data of the bale opener line for RDF. MSW, paper, cardboard:Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, FinlandType BO 4000 Year of manufacture 2015Quantity of opened bales 674 piecesOperating time only 3 days, exclusively by running in the entire line during new installationOpening time approx. 45 seconds per baleBale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mmMax. Bale weight 2,000 kgConveying height of the system 1,400 mmMax. Conveying width of the system 1,200 mmMaterial to be opened RDF/MSWAvailability of the line 98%Noise level of the bale opener line 85 dB(A)Total connected load 37 kWRated current 125 AOperating display SIEMENS SIMATIC HMI TouchControl SIEMENS S7 ET200SInstallation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h)Scope of delivery:Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mmBale opener (gripper with knif ...

For sale is a sorting plant for commercial waste, paper, cardboard, plastics etc., year of construction 2022, only 151 operating hours, with a sorting capacity of up to 20,000 tonnes/year, in two-shift operation. The plant consists of the following components:1 piece feeding / dosing hopper with steel slat conveyor and a dosing drum, manufacturer Bollegraaf, type BDF-1200/20001 piece ascending conveyor between the feed hopper and the sorting cabin, manufactured as a troughed conveyor, manufacturer Lubo Systems, type TBM 2000 x 150001 piece sorting cabin, air-conditioned (heated), measuring 14,500 x 5,732 x 3,270 mm (l x w x h), with 4 sorting stations, 8 discharge chutes and 5 material bunkers underneath. The concrete blocks are not included in the scope of delivery of the sorting system.1 piece sliding belt conveyor as sorting belt, manufacturer Bollegraaf, type HBGT 250/1400 150001 p ...

Overview of the equipment of a used sorting plant, year of construction 2009, with a sorting capacity of 25,000 t/yearFor sale is a complete used sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components:1 piece sorting cabin with an integrated office (control room), external dimensions 14,200 x 11,400 x 4,350 / 8,170 mm (l x w x h), with 3 sorting belts and 10 sorting places, air-conditioned (heated).1 piece ventilation system for the sorting plant with 17,600 m³/hour, manufacturer VTS Ventus, type VS-120-R-H/S1 piece infeed conveyor belt, right, no. 10, dimensions 7,360 x 1,200 mm, drive power 3 kW1 piece infeed conveyor belt, centre, no. 11, dimensions 7,360 x 1,200 mm, drive power 3 kW1 piece infeed conveyor, left, no. 12, dimensions 6,360 x 1,200 mm, drive power 3 kW1 piece sorting belt, long, right, no. 15, dimensi ...

Technical data Feed hopper with hydraulic moving floor and bag opener:Manufacturer BRT HARTNER GmbHType HP5-3035Year of construction 2015Hopper volume 30 m³ Drive line 17.5 kWDimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h)Condition of the machine:The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high.Comments:The machine is currently being overhau ...

Technical data single-deck ballistic separator for three separation fractions:Manufacturer Lubo Screening & Recycling Systems B.V.Type Elliptical 10EBB05Year of construction 2015Screening area 12.5 m², consisting of 6 screen paddles 400 x 5000 mm Weight 7,100 kgNote on the separation process:The Lubo Elliptical is a state-of-the-art ballistic separator. It separates the material stream into three fractions, heavier 3D fractions such as tin cans or PET bottles, lighter 2D fractions and screened fines. This ensures high separation quality for various waste streams such as mixed waste, packaging, mixed paper, film and cans.Condition of the machine:The Elliptical 10EBB05 ballistic separator is still in use at a large recycling company separating mixed waste until the 18th calendar week, when it will be replaced by a larger machine with a higher throughput capacity. The machine is in a well- ...

Technical data IFE cascade screens (vibrating waste screens):Manufacturer IFE Aufbereitungstechnik GmbH, AustriaType SM 2400 x 5000 F - UW30Year of construction 2009Drive motor 22 kWRated current 43 AScreen dimensions overall 5,000 x 2,400 mm (l x w)Dimensions of individual sieve segment 950 x 800 x 130 mm (l x w x d)Screen hole grid 150 x 125 mmLength of screen fingers (steel tubes in front of the screen segments) 400 mmSwing width max. 18.5 mmWeight approx. 6,600 kgPossible applications:The waste screen is suitable for use in plants for sorting household waste, commercial and industrial waste, paper and cardboard, scrap metal and electrical waste. Blockage-free screening with the most difficult feed materials, with high throughput capacity, no pigtail formation with oversize particles, loosened oversize particle discharge over the entire screen width and no downtimes for screen cleanin ...

Technical data for the bale loosening drum:Manufacturer not knownType of bale loosening drumYear of manufacture not knownDimensions of the drum 6000 x 3000 mm (l x d)Height of the welded-in helix 300 mmDimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H)Drive power 2 x 4 kWFunctional description:The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing.Scope of delivery:Bale loosening drumFrame with drive and roller bearings for the bale loosening drumComments:Documentation (operating  ...

We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h.We have the following technical information:Manufacturer: BOREMA Umwelttecjhnik AGType: R-1200 F (with trolley for retracting and extending)Year of manufacture: 2013Drive power: 11 kWConnected load: 15 kWRated current: 32 ABack-up fuse: 40 AType of construction: Continuous systemFunction: Double rotor press systemRotor pretension pneumatic: approx. 16tOverload protection: by anti-blocking systemInput material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacityInput material: HDP ...

Technical data feeding conveyor belt:Manufacturer BollegraafTyp HBT 1216/2000 18000Year of construction 2015Driving motor 5,5 kWLength feeding conveyor 18,000 mmGrade 0°Effecting width 2,000 mmHeight of side wall feeding conv. 500 mmTransport dimensions 18,000 x 3,200 (2,830 mm without motor and gear) x 1,200 mm l x w x hWeight approx. 13 tComments:Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Technical data PaperSpike 2 G:Manufacturer Grumbach und Petermann GmbHType 2500Year of construction 2019Dimensions accelerator belt 3,000 x 2,980 x 600 mm (l x w x h)Weight 1,100 kgDimensions PaperSpike sorting unit 2,480 x 2,982 x 1,805 mm (l x w x h)Weight 3,100 kgDimensions PaperSpike 2G complete 5,450 x 3,480 x 1,805 mm (l x w x h)Weight 4,600 kgDimensions paper discharge conveyor 3,400 x 1,200 x 650 mm (l x w x h)Weight 400 kgElectrical equipment of the entire system:Voltage 380 - 420 VConnected load 9.5 kWCurrent consumption 20.34 AOperating principle:The material is fed in as dry and thin a layer as possible, preferably a monolayer, evenly over the entire width on the accelerator belt.The sorting roller with the spikes pulls the mixed paper from the chute, while cardboard boxes are impaled and held by the spikes. Material (paper) with low stiffness (newspapers, magazines, brochur ...

Binder Bunker Conveyor Belt Brand: Binder Length A.A. = 7000 mm, belt width 1400 mm Drive: Slip-on gearbox 11 kW.

Press shear Type: LU 800/8PA60 Manufacturer: Lindemann Year: 1994 Cutting force: 800 t Hold-down force: 250 t Lid force: 200 t Side compression force: 250 t Pusher force: 200 t Charging box dimensions: 6.2 x 2.1 m Electric motors: four units of 90 kW each, plus one unit of 7.5 kW Operating pressure: 320 bar Maximum pressure: 350 bar Machine in good condition, under power Find more here - / Contact us at -

Press shear Type: LU 1000/10PA75 Manufacturer: Lindemann Year: 1997 Cutting force: 1000 t Hold-down force: 250 t Lid force: 200 t Side compression force: 250 t Pusher force: 200 t Electric motors: 5 units of 90 kW each Machine in good condition, under power Find more here - / Contact us at -

model: T400, fire: Idromec, Stauts: Used, refurbished,, Year of construction: 2007, shearing force: 400 tons, box length: 5 meter, shear throat: 600x500mm, power unit: electric,1x55 kW motor, Piston pumps: main pump by Rexroth, Warranty: none

Clarifying Decanter with 2 gear drives, continuously operating horizontal solid-wall centrifuge, used for the dewatering of municipal and industrial waste water sludge. The frame is of open design with gravity discharge of the clarified phase. Rotating parts manufactured in stainless steel 1.4462 (DUPLEX steel with addition of Molybdenum which secures good resistance against pitting corrosion and intergranular corrosion). Diameter: 300 / 157 mm. Max bowl speed: 4.500 rpm. Solids: 2,5 kg/dm3. Min / Max temperature: 5 - 80 °C. Comparative capacity: 20.000 ltr/h. g-force (z): max 3.400 g. Motor bowl drive (15 kW) + motor scroll drive (2,2 kW). Special lifting tools for maintenance, Operation manual / spare parts manual in German language. Decanter was maintained by GEA Wesfalia., Type of Machine: Decanter, Diameter: 300 / 157 mm, Bowl speed: 4.500 rpm, Solids: 2,5 kg/dm3, Temperature: Min  ...

Vibron channel Vibratory Conveyors

Fe separator, overbelt magnet. Overall dimensions with gearbox LxWxH: 2950x1800x550 mm Rubber belt width: 1280 mm Magnetic core dimensions LxWxH: 1580x1150x300 mm Total weight approx. 3500 kg Motor/gearbox: SEW ,power 2.2 kW Machine checked, ready for immediate use Base Available, dimensions approx. LxWxH 3100x2800x6000 mm

A Untha recyclable material shredder for plastics overhauled in 2020 is available. Drive power: 55kW, cutting unit opening: 1400mm/1800mm, rotor length: 1400mm, rotor diameter: 450mm, rotor speed: 92rpm, knife rows: 3, cutting tools: 112, cutting system: S34/S/KO, screen hole diameter: 12mm, motor efficiency class: IE3.Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2500mm, weight: approx. 5600kg. Including built-in base frame and beam pressure system.

A large Untha recyclable material shredder for plastics is available.Drive power: 110kW, cutting unit opening X/Y: 1840mm/2000mm, cutting system: ÜSS S36, shafts: 1, machine dimensions X/Y/Z: 3750mm/2950mm/2650mm, weight: approx. 20000kg.Including hopper, base frame, press-in device and various perforated screen trays.Documentation available.

Manufacturer: ICS Model: CSP.3 Year of Manufacture: 2020 Type of Machine: Wet Cutting Table Technical Specifications - Dimensions: - Height: 2,408 mm - Width: 1,620 mm - Depth: 2,548 mm - Total Weight: 1,266 kg - Power Supply: - Voltage: 400 V - Frequency: 50 Hz - Max Power Consumption: 6.3 kW - Protection: IP 54 minimum for all electrical components - Performance: - Throughput: Up to 700 kg/h (depends on input material and sieve type) - Max Input Size: 10 mm diameter and length - Noise Level: 85 dB(A) under full load - Required Connections: - Electrical connection as per included wiring diagram - Earth grounding mandatory Find more here - / Contact us at -