pressure: 100 tthroat: 350 mmstroke: 20 - 120 mmtable size: 1100 x 700 mmram head dimension: 750 x 450 mmram adjustment: max. 90 mmno. of strokes: 70 Hub/minstrokes - infinitely variable: 20 - 120 Hub/mindaylight, max. stroke above - ram adjustment above: 500 mmhole in the table: 400 x 300 mmhole in bolster plate: 220 x 180 mmBreakthrough in column back: 450 x 300 mmtotal power requirement: 11 kWweight of the machine ca.: 11,8 tdimensions of the machine ca.: 2,1 x 1,3 x 2,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 tthroat: 200 mmstroke: 4 - 80 mmtable surface area: 520 x 400 mmno. of strokes: 160 Hub/minforce: Dauerlauf 1765 J dayligth: 302 max mmdayligth: 100 min mmadjustment of stroke: 8-84 mmram adjustment: 55 mmram surface: 185 x 180 mmram hole: 40 H7 mmforce: 3530 J hole in the table: 210 x 170 mmwidth of T-slots: 22 mmconnected load: 3,5 kWrated current: 9 frequency: 50 Hzvoltage: 380 Vweight of the machine ca.: 2700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 tthroat: 200 mmstroke: 4 - 80 mmtable surface area: 520 x 400 mmno. of strokes: 160 Hub/minram surface: 160 x 160 mmram adjustment: 40 mmram hole: 32 H7 mmhole in the table: 200 x 150 mmclamping plate: 500 x 380 x 60 mmtotal power requirement: 2,7 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 1,3 x 1,0 x 1,85 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 tthroat: 200 mmstroke: 4 - 80 mmtable-size: 520 x 400 mmno. of strokes: 160 Hub/minwork capacity during endurance run: 1370 Nmforce: 2740 Einzelhub adjustment of stroke: 4 - 80 mmram adjustment: 40 mmram surface: 160 x 160 mmhole in the table: 200 x 150 mmclamping plate: 500 x 380 x 60 mmhole in the table: 80 mmweight of the machine ca.: 1,9 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 tthroat: 225 mmstroke: 8 - 84 mmtable surface area: 580 x 450 mmram adjustment: 55 mmno. of strokes: 130 Hub/minram surface: 185 x 180 mmram hole: 40 mmhole in the table: 210 x 450 mmclamping plate: 570 x 450 mmtotal power requirement: 3,5 kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: 1,4 x 1,1 x 2,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 tthroat: 225 mmstroke: 8-84 mmTable dimensions: 580 x 450 mmram adjustment: 55 mmno. of strokes: 130 Hub/minram surface: 185 x 180 mmram hole: 40 H7 mmhole in the table: 210 x 170 mmT-slots: 22 clamping plate: 570 x 450 x 65 mmtotal power requirement: 3,5 kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: 1,4 x 1,1 x 2,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 tthroat: 225 mmstroke: 8-84 mmTable dimensions: 580 x 450 mmram adjustment: 55 mmno. of strokes: 130 Hub/minram surface: 185 x 180 mmram hole: 40 H7 mmhole in the table: 210 x 170 mmT-slots: 22 clamping plate: 570 x 450 x 65 mmtotal power requirement: 3,5 kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: 1,4 x 1,1 x 2,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 55 tthroat: 250 mmstroke: 10-90 mmtable-size: 640 x 495 mmno. of strokes: 120 Hub/minram adjustment: 55 mmram surface: 290 x 210 mmram hole: 40 H7 mmhole in the table: 220 x 190 mmT-slots: 22 clamping plate: 620 x 485 x 65 mmtotal power requirement: 4,5 kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: 1,5 x 1,2 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 55 tthroat: 250 mmstroke: 10-90 mmtable-size: 640 x 495 mmno. of strokes: 120 Hub/minram adjustment: 55 mmram surface: 195 x 210 mmram hole: 40 H7 mmhole in the table: 250 x 190 mmT-slots: 22 clamping plate: 620 x 485 x 65 mmtotal power requirement: 4,5 kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: 1,5 x 1,2 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 55 tthroat: 250 mmstroke: 10-90 mmtable-size: 640 x 495 mmno. of strokes: 120 Hub/minram adjustment: 55 mmram surface: 290 x 210 mmram hole: 40 H7 mmhole in the table: 220 x 190 mmT-slots: 22 clamping plate: 620 x 485 x 65 mmtotal power requirement: 4,5 kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: 1,5 x 1,2 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 15 tthroat: 160 mmstroke: 6 - 60 mmram adjustment: 60 mmno. of strokes: 120 Hub/mintable height adjustment: 150 mmtable surface area: 500 x 350 mmram hole: 30 mmtotal power requirement: kWweight of the machine ca.: 850 kgdimensions of the machine ca.: 0,75 x 0,85 x 1,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 8 tthroat: 115 mmstroke: 8-56 mmram - range of adjustment: 30 mmtable surface area: 390x230 mmram surface: 155x125 mmhole in the table: 105x75 mmtable height: 820 mmtool hole in ram: 35 mmweight of the machine ca.: 800 kgdimensions of the machine ca.: 1000x1000x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 16 tthroat: 185 mmstroke: 8-60 mmno. of strokes: 140 Hub/minram - range of adjustment: 50 mmtable surface area: 500x340 mmram surface: 230x155 mmhole in the table: Ø160 mmtable height: 800 mmhole in the table: Ø35 mmweight of the machine ca.: 1,5 tdimensions of the machine ca.: 1200x1200x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 15 tthroat: 190 mmstroke: 6-80 mmstroke: 8-60 mmno. of strokes: 140 Hub/minram - range of adjustment: 60 mmtable surface area: 590x400 mmram surface: 230x180 mmhole in the table: 200x140 mmtable height: 800 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 1 tdimensions of the machine ca.: BxTxH 1000x1000x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bret PCK 160 tonCapacity: 160 ton Deph of throat: 405 mm Max adjustable stroke: 20 > 200 mm Workingspeed: 40 > 80 strokes/min Passage between uprights: 960 mm Max ram adjustment: 150 mm Electric motor (power): 22 kW Length : 2050 mm Depth : 2235 mm Hight: 4200 mm Weight: 18 ton
pressure: 80 tthroat: 250 mmstroke: 5/95 mmtable surface area: 805 x 510 mmdistance table/ram: Hub unten - 400 mmtool hole in ram: 45 mmram adjustment: 100 mmram surface: 360 x 300 mmno. of strokes: 55 Hub/mintotal power requirement: 5,5 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 0,83 x 1,7 x 2,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 tthroat: 200 mmstroke: 4 - 80 mmtable surface area: 595 x 410 mmram adjustment: 70 mmno. of strokes: 150 Hub/mintable adjustable in height: 240 mmtotal power requirement: 1,1 kWweight of the machine ca.: 1,45 tdimensions of machine L x W x H: 1,30 x 0,80 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 50 tthroat: 250 mmstroke: 8-120 mmno. of strokes: 115 Hub/minram - range of adjustment: 70 mmtable surface area: 650x510 mmram surface: 400x180 mmhole in the table: Ø 180 mmtable height: 850 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4 tdimensions of the machine ca.: BxTxH 1500x2500x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Capacity 75 tons Stroke rate 90 strokes Projection 300 mm Plunger stroke 16 - 140 mm Plunger adjustment 80 mm Table size approx. 800 x 600 mm Installation height max. approx. 400 mm
pressure: 75 tthroat: 300 mmstroke: 16-140 mmno. of strokes: 105 Hub/minram - range of adjustment: 80 mmtable surface area: 800x600 mmram surface: 650x260 mmhole in the table: Ø180 mmtable height: 920 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4,5 tdimensions of the machine ca.: BxTxH 1500x2500x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 tthroat: 320 mmstroke: 8-140 mmno. of strokes: 30-120 Hub/minram - range of adjustment: 100 mmtable surface area: 900x620 mmram surface: 600x320 mmhole in the table: 315x180 mmtable height: 870 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 7,3 tdimensions of the machine ca.: BxTxH 1500x2000x2750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm
pressure: 100 tthroat: 325 mmstroke: 10-110 mmno. of strokes: 100 Hub/minram - range of adjustment: 80 mmtable surface area: 900x630 mmram surface: 500x315 mmhole in the table: 325x225 mmtable height: 800 mmtool hole in ram: Ø 50 mmdimensions: BxTxH mmweight of the machine ca.: 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg
pressure: 80 tthroat: 300 mmstroke: 6 - 140 mmram adjustment: 100 mmno. of strokes: 60 Hub/mintable surface area: 900 x 620 mmram surface: 600 x 280 mmtotal power requirement: 14 Aweight of the machine ca.: 7,6 tdimensions of the machine ca.: BxTxH 1,38 x 2,1 x 2,56 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 75 tthroat: 305 mmstroke: 16-140 mmno. of strokes: 80/105 Hub/minram - range of adjustment: 80 mmtable surface - upper: 800x600 mmram surface: 470x180 mmhole in the table: Ø 150 mmtable height: 870 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 5 tdimensions of the machine ca.: BxTxH 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tthroat: 340 mmstroke: 8-140 mmno. of strokes: 50 Hub/minram - range of adjustment: 110 mmtable surface area: 1000x700 mmram surface: 650x450 mmhole in the table: Ø 180 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 10,5 tdimensions of the machine ca.: BxTxH 2300x1600x3500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 130 tthroat: 450 mmstroke: 20-200 mmno. of strokes: 60/80 Hub/minram - range of adjustment: 110 mmtable surface area: 1000x880 mmram surface: 900x450 mmhole in the table: 400x200 mmtable height: 850 mmtool hole in ram: Ø 50 mmtotal power requirement: 15 kWweight of the machine ca.: 13,5 tdimensions of the machine ca.: BxTxH 1600x2700x3400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 tthroat: 270 mmstroke: 4-100 mmno. of strokes: 130 Hub/minram - range of adjustment: 80 mmtable surface area: 670x540 mmram surface: 460x300 mmhole in the table: Ø 100 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 6 tdimensions of the machine ca.: BxTxH 1500x2300x3300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 tthroat: 300 mmstroke: 8-140 mmno. of strokes: 70 Hub/minram - range of adjustment: 100 mmtable surface area: 750x620 mmram surface: 500x340 mmhole in the table: Ø 180 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 7,5 tdimensions of the machine ca.: BxTxH 2100x1500x3300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Hole in the table: 100 x 210 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space requirements: 1300 x 800 x 2000 mm Weight: approx. 1450 kg
Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space required: 1600 x 850 x 2000 mm Weight: approx. 1450 kg
pressure: 75 tthroat: 310 mmstroke: 16-140 mmno. of strokes: 105 Hub/minram - range of adjustment: 80 mmtable surface area: 800x610 mmram surface: 600x175 mmhole in the table: Ø 170 mmtable height: 820 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4 tdimensions of the machine ca.: 1500x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tthroat: 345 mmstroke: 20-100 mmno. of strokes: 60 Hub/minram - range of adjustment: 85 mmtable surface area: 980x650 mmram surface: 600x440 mmhole in the table: Ø 200 mmtable height: 820 mmtool hole in ram: ¤7 65 mmweight of the machine ca.: 7 tdimensions of the machine ca.: 2000x2000x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: tthroat: mmstroke: mmtotal power requirement: 23 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 400 tthroat: 400 mmstroke: 40 - 140 mmnumber of strokes - idle run: 32 min-1ram adjustment: 125 mmtable surface area: 1250 x 750 mmdayligth: min/max 450/590 mmtotal power requirement: 31,5 kWweight of the machine ca.: 23 tOverall size: 3,7 x 1,7 x 3,9 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Compressive force: 80 t Projection: 350 mm Table size: 700 x 720 mm Diarrhoea level in table: 160 mm Plunger area: 300 x 445 mm Plunger adjustment: approx. 80 mm Stroke adjustment: 8 - 100 mm Stroke rate: approx. 90 rpm Drive motor: 380 V, approx. 5 kW Dimensions: 2050 x 1100 x 2450 mm Weight: approx. 3800 kg
Pressure: 65 tons -Stroke: 140 mm -Table size: 720 x 600 mm -Plunger surface: 500 x 300 mm -Tappet adjustment: 80 mm -Strokes: 20-40 per min. -. Weight: 6000 kg -Dimensions (L x W x H): height 3.1 m -Clamping hole ø 60 x 80 mm More info on request
pressure: 100 tthroat: 350 mmstroke: 8 - 100 mmno. of strokes: 60 Hub/mindaylight (stroke down, ram adjustment above): 300 mmram adjustment: manuell 80 mmtable surface area: 850 x 700 mmhole in the table: Dm. 180 mm mmram surface: 560 x 400 mmram drills x depth: 40 x 95 mmtable height over floor: 850 mmtotal power requirement: 7,5 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 1,4 x 2,2 x 2,85 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Force of pressure: 100 t projection: 350 mm table size: 690 x 840 mm Durchfalloch in the table: 160 mm table adjustment: slide area: 450 x 600 mm slide adjustment: 80 mm stroke adjustment: 8-100 mm stroke rate: 60 / min drive motor: 380 V, 5.5 kW space: 1850 x 1850 x 2650 mm weight: 6800 kg
pressure: 125 tthroat: 360 mmstroke: 20 - 130 mmtable surface area: 920 x 690 mmram surface: 580 x 400 mmno. of strokes: 60 Hub/minram adjustment: 80 mmhole in the table: 200 mmtool hole in ram: 50 mmdaylight (stroke down, ram adjustment above): 500 mmtotal power requirement: 11 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: B 1,32 x T 1,8 x H 2,82 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 tthroat: 230 mmstroke: 12-84 mmno. of strokes: 135 Hub/minram - range of adjustment: 70 mmtable surface area: 600x460 mmram surface: 340x170 mmhole in the table: 220x130 mmtable height: 800 mmtool hole in ram: Ø 35 mmweight of the machine ca.: 2,5 tdimensions of the machine ca.: 1800x1800x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tthroat: 300 mmstroke: 20 - 128 mmram - range of adjustment: 80 mmstrokes per minute: 60 - 90 table surface area: 920 x 600 mmram surface: 540 x 290 mmhole in the table: 315 x 180 mmdaylight, max. stroke above - ram adjustment above: 520 mmtool hole in ram: Dm. 50 mmtotal power requirement: kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: 1,8 x 1,7 x 2,2 mFurnishing:- Gear transmission- fixed table- Triple bearing shaft- semi-automatic stroke adjustment- hydraulic clutch-brake combination- hydraulic overload (modern unit mounted on the stand on the left)- Hydraulic unit with oil cooler for clutch mounted on the left side of the stand- Ball spindle adjustment using a ratchet- automatic central lubrication VOGEL- Operating instructions / CE declaration availableMachine is partially overhauled in our company as follows:- dismantled, cleaned and completely tech ...
pressure: 100 tthroat: 300 mmstroke: 20 - 124 mmstrokes per minute: 60/90 ram adjustment: 85 mmtable surface area: 920 x 600 mmram surface: 540 x 290 mmdaylight, max. stroke above - ram adjustment above: max. 440 mmhole in the table: 290 x 170 mmtool hole in ram: Dm. 50 mmtotal power requirement: 6,5 - 8,5 kWweight of the machine ca.: 5,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 110 tthroat: 295 mmstroke: 20-120 mmno. of strokes: 60/90 Hub/minram - range of adjustment: 85 mmtable surface area: 920x580 mmram surface: 540x280 mmhole in the table: 300x180 mmtable height: 830 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,1 tdimensions of the machine ca.: BxTxH 1500x2000x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 110 tthroat: 300 mmstroke: 20-120 mmno. of strokes: 60/90 Hub/minram - range of adjustment: 85 mmtable surface area: 920x560 mmram surface: 540x280 mmhole in the table: 320x190 mmtable height: 800 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,6 tdimensions of the machine ca.: 2000x2000x2600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 tthroat: 350 mmstroke: 20-120 mmno. of strokes: 50 / 75 Hub/minram - range of adjustment: 85 mmtable surface area: 1150x670 mmram surface: 800x380 mmhole in the table: 330x200 mmtable height: 800 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 8 tdimensions of the machine ca.: BxTxH 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 75 tthroat: 300 mmstroke: 8 - 110 mmtable surface area: 750 x 600 mmram adjustment: 75 mmram surface: 430 x 230 mmhole in the table: 250 x 150 mmtool hole in ram: 40 mmno. of strokes: 60 + 90 Hub/minweight of the machine ca.: 4,4 ttotal power requirement: 4,5 - 6,8 kWdimensions of the machine ca.: 1,95 x 1,1 x 2,35 mdistance table/ram: Hub unten, Stöß. unten 19 mmdistance table/ram: Hub oben, Stöß. oben 380 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 tthroat: 350 mmstroke: 20-120 mmno. of strokes: 40-60 Hub/minram - range of adjustment: 85 mmtable surface area: 1050x690 mmram surface: 650x320 mmhole in the table: 325x200 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 8,6 tdimensions of the machine ca.: 2500x2500x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 50 tthroat: 250 mmstroke: 6/98 mmram adjustment: 75 mmno. of strokes: 60/90 Hub/mintable height adjustment: 150 mmtable surface area: 695 x 500 mmtotal power requirement: kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 0,9 x 1,6 x 2,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.