used Numerically Controlled Machining Centres for sale

Processing field 1300 x 3200 mm Z axis 200 mm 2 Fields of work Automatic lubrication Rotary tool changer 8 slots removable with tool changer on the machine stand or change on 12 seat changers Net weight approx. 4 ton

CNC machining center VEGA 5X 5 axis center

x-travel: 2360 mmy-travel: 600 mmz-travel: 800 mmControl: Siemens 840 D total power requirement: 69 kVAweight of the machine ca.: 16,5 tdimensions of the machine ca.: mUniversal machining center for 5-axis simultaneous machining.Technical specifications:Traverse X/Y/Z 2360 x 600 x 800 mmPendulum stroke with vertical spindle left/right 1160/700 mmTable clamping area 2750 x 600 mm with 4 T-slotsTool holder SK 50Spindle speeds 30 - 4000 rpm.Equipment:CNC control Siemens 840 D with Shop Mill DIN ISOCNC rotary table type RTA 3-520CNC swivel milling head infinitely variable positioningTool changer with 26 tool placesChip conveyorCoolant system with high-pressure pump and belt filter systemCoolant through spindle 20 barElectric hand wheelSpace requirements:Machine length 5650 mm + 1800 mm with chip conveyorMachine width 3500 mm plus control panelMachine height 3200 mmMachine without clamping v ...

x-travel: 2940 mmy-travel: 700 mmz-travel: 850 mmControl: Siemens 840 D total power requirement: 75 kVAweight of the machine ca.: 16,5 tdimensions of the machine ca.: mTechnical specifications:Traverse X/Y/Z 2940 x 700 x 850 mmPendulum stroke with vertical spindle left/right 1170/1170 mmSpindle speeds 30 - 4000 rpm.AC hollow shaft motor, power 45 kW at 40% EDMax. torque 286 Nm at 40% EDTool holder SK 50Equipment:CNC control Siemens 840 DAutomatic CNC swivel head, B-axis under 2.5°directly programmable from X (-) 90° to X (+) 90°Locking via Hirth toothingTapping without compensating chuckCNC rotary tableMeasuring system Heidenhain, direct linearTool changer with 26 tool placesChip conveyorCoolant system with high-pressure pump and belt filter systemSpace requirements:Machine length 5800 mm + 1700 mm with chip conveyorMachine width 3300 mm plus control panelMachine height 3200 mmThe da ...

SECOND-HAND 5 AXIS CNC WORKING CENTER BACCI MOD. DOUBLE - X= 2400mm ; Y=650mm ; Z=1000 - N.2 heads type T2 - Spindle power 7.5Kw - rpm 0 - 18.000 - Max/min pieces length 150/2400mm - Loader type CSF2 - Year 2002 - s/n AB004 - Complete with manual and CE declaration

SECOND-HAND 5 AXIS CNC WORKING CENTER BACCI MOD. SMART – CE RULES - strokes: longitudinal axis x 1500mm transversal axis y 1800 mm vertical axis z 1000 mm. axis b unlimited axis c 400° - cn osai - type head 2+2 - rpm 0-24.000 - vacuum pump - cabin - volt. 380/50 - sn 120 - year 2001

SECOND HAND 5-AXIS CNC WORKING CENTER BACCI MOD. TWIN JET - strokes: X-axis 5400 mm Y-axis 1300 mm Z axis 650 mm A-axis 360° B-axis 260° - head type 2+2 (7.5 + 7.5 Kw) - chuck ER 32 - spindle speed 12000-24 rpm - n. 10 pneumatic clamps - n. 1 table Tgv - Cn Osai - yaskawa drivers - PITAGORA software - n. 1 Becker mod. PICCHIO 100 mc vacuum pump - Cabin (n.4 sides + roof) - volt. 380/50 - matr. 524 - CE Rules (Year 2008)

SECOND-HAND 5 AXIS BALESTRINI IDEA 2 – CE RULES - X axis 1800 mm - Y axis 1600 mm - Z axis 700 mm - 4 x 7.5 air cooled Colombo spindles - NUM control. - 2 Pumps 75 mc/h Rietschle - YEAR 2007 - complete with cabin

5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - n. 2 working tables 1400x3000 mm - n. 3+3 rails per each working table - n. 3+3 CSR supports per each table - head type CS 44 (n. 4 motors 7.5 kW each) - rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - n. 2 inverters - wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - remote support - communication PC/CN TCP/IP - cabin + roof - CE rules - year 2010 - COMPLETELY RECONDITIONED

SECOND-HAND WORKING CENTER 4 AXIS BIESSE MOD. 37 XL - working dimension X 6000 - work dimension Y 1850 - work dimension Z 180 - 1 router - power router Kw 12 - C axis interpolating - tool clamping system HSK F63 - tool changing positions 21 - vertical drilling spindles 20 - horizontal drilling spindles X 6 - horizontal drilling spindles Y 2 - pod and rail table - n. 10 consoles - vacuump pump 250 m3/h - ATS - CE RULES (YEAR 2004)

SPECIFICATIONS: CNC Editor BSolid Basis Working range X mm: 200 - 2600 Working range Y mm: 35 - 900 Working range Z mm: 8 - 80 BH17 autonomous spindle unit Configuration: 10 autonomous vertical spindles with 32 mm spacing, with tool holder system, of which: - 5 arranged in X-direction - 5 arranged in Y-direction 3 independent horizontal spindles, arranged in the X and Y directions, equipped with the tool holding system, of which - 2 double outputs arranged in the X-direction - 1 double output arranged in Y-direction 1 sawing unit with saw blade diameter 120 mm, clockwise rotation, fixed working direction in X-direction Key features: Saw blade Ø 120 mm Max. cutting depth: 25 mm Cutting thickness: 4 mm Clockwise rotation of the tools - tool fastening by screws Vertical pneumatic unlocking The control unit is designed to accommodate the electrospindle. ...

Machine Size 2800 x 1940 x 2000mm Min. Size of machined panel 200 x 35 x 8mm Max. size of machined panel 3200 x 900 x 60mm

SPECIFICATIONS: Dimensions of the work table mm: 1,800 x 1,600 with two working areas 02 Automatic tool changing spindles Electrospindle type ISO 30 12 tool changing stations Copy milling machine 02 drilling units (13 vertical, 2+2 horizontal) 02 Becker vacuum pumps with 250 m3 Electrical control cabinet

Code: 0218 Brand: BIESSE Model: ROVER 18 - CE Standard CNC working center with 3 controlled axis - CE Standard Technical data: Working range X axis mm 2310 mm - Y axis mm 710 - stroke Z axis mm 90 N ° 6 worktables Boring unit composed of n° 12 vertical spindles - n° 4 horizontal spindles - Motor power Hp 2,3 Router HSD Hp 5 - Max speed 24.000 rpm Bevel gearbox unit Vacuum pump 40 m3/hour Working pressure 6 bar Installed electric power 10 Kw Suction port diameter mm 200 Numerical control CNI NC481: Monitor 9 " Multiscreen: a special softkey is constantly enabled to allow the passage of the AUTOMATIC or MANUAL operating environment, to the PUBLISHING environment for writing and editing of the programs, while the machine works, all the programming operations , insertion and modification of tool data can be performed , total graphics, PLC debugging  ...

Biesse Italy, Rover 22 CNC Machining Center Built in 2001 SN 07498 Workspace 4 axes X-axis 3060 mm Y-axis 1080 mm Z-axis 155 mm 6 consoles with 18 vaccum suction holder 4 pneumatic bakelite rods for lifting the plate Vertical electric spindle 7.5 kW with automatic tool change, ISO 30 cone Automatic tool change 7 positions on the working head Drill head with 20 spindles arranged as follows: 7 vertical in X-axis 7 permeable to Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis Groove saw 120mm Safety tread mats 110 m3 / h vacuum pump CE marked Weight 3500 Kg Technical information subject to reservation

Description: Type of work Drilling Routing X axis working area 3060 mm Y axis working area 1395 mm Working Table Pod and Rail Main Electrospindle power 9 KW Number of controlled axes 3 axes Total number of drilling spindles 28 Total number of tool changer positions 7 X axis work area 2971 mm Y axis work area 1395 mm No. working fields 2 Working table yes Working table Pod and Rail No. of Rails 6 Vacuum pump yes No. pumps 1 Single capacity 250 m3/h Boring units 1 BORING UNITS 1 Unit : top Vertical Boring Spindles : 20 Horizontal Boring Spindles in X : 6 Horizontal Boring Spindles in Y : 2 Total number of vertical + horizontal spindles : 28 Router Spindles 1 ROUTER SPINDLES 1 Unit : top No. controlled axes : 3 Automatic tool change : yes Motor power : 9 kw Tool magazine 1 TOOL MAGAZINE 1 No. positions : 7 Tool : positioned on the machining head Control system WINDOWS XP Machine programming ...

SECOND-HAND CNC WORKING CENTER 4 AXIS BIESSE MOD. ROVER 24 S 6.5 - Working dimensions: X = 3000mm ; Y = 1350mm ; Z = 155mm - Tool changer 9 slots - ISO 30 - Drilling head 16 spindles - Saw blade group - Axe C - Vacuum pump Becker 100 mc/h - N. 6 working consoles - 7.5 bars - CE (year 2001)

Description: Number of spindles for vertical drilling: ,14 + 12 Number of spindles for horizontal drilling 4-sided: ,6 + 2 Max. panel thickness: 115 mm Spindle speed: ,4000 rpm Routing rotation speed: 1000 - 24000 rpm Routing: ISO 30  ,  ,  ,vacuum pump: 120 m³/h, serial number: 60,835, total electrical load: 14 kW, 5-axis machining: Yes, Number of vacuum pumps: 1 pieces, x-motion: 3,372 mm, y-motion: 1,200 mm, z-motion: 125 mm, path-feed rate max. X-axis: 75 m/min, path-feed rate max. Y-axis: 75 m/min, path-feed rate max. Z-axis: 15 m/min, saw unit: 0 - 90 graden roteerbaar, control: NC481, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,400 x 2,000 mm, weight approx.: 4,500 kg

Description: Type of work Drilling Routing X axis working area 6000 mm Y axis working area 1850 mm Working Table Pod and Rail Main Electrospindle power 7.5 KW Number of controlled axes 4 axes Total number of drilling spindles 42 Total number of tool changer positions 7 No. of Rails 10 Vacuum pump ROUTER SPINDLES Unit : top No. controlled axes : 4 Automatic tool change : yes Motor power : 7.5 kw GROOVING UNIT , Max. tool diameter : 160 mm Motor power : 3 KW TOOL MAGAZINE , No. positions : 7 Tool : positioned on the machining head Control system NC 1000 TOOLS NOT INCLUDED  ,Approx. Onsite Dimension. (l x w x h): 7,700 x 3,400 x 3,000 mm, weight approx.: 7,000 kg

5 axis CNC Wood Machining Center Table size 3280x1580 mm X,Y,Z axis speeds 80,60,20 mm/min Software Bsolid

SPECIFICATIONS: Machining center with grid table Working range X mm: 4300 Working range Y mm: 2200 Working range Z mm: 170 Milling unit - Electrospindle HSK F63, KW 13.2 Drill head type BH10 vertical/horizontal 2 vacuum pumps, each 250 m3 Automatic loading and unloading system Scissor lift Length unloading carpet mm: 4.940 Automatic unloading Automatic lubrication system Additional workstation for displaying and printing labels Revolver tool magazine with 16 positions

Description: Biesse Rover A4.55 - CNC Center , Model: Biesse Rover A4.55 Type: 4-axis CNC Center Year: 2010 Working Area: 5500mm x 1250mm Rails: 10 Tooling: Router, Drilling Unit, Horizontal Motor Axis: 4-axis (including C-axis) Tool Magazine: 20 positions (Without tools) Aggregates: Floating, 1-exit, 2-exits, Sawblade Tool Holder Type: ISO30 Features: Reference Stops, Detection Sensors, Thickness Measurement vacuum pump: 250 m³/h, 5-axis machining: No, x-motion: 5,680 mm, y-motion: 1,460 mm, z-motion: 200 mm, Approx. Onsite Dimension. (l x w x h): 7,900 x 4,500 x 1,980 mm, weight approx.: 3,900 kg

I sell a double-sided CNC machining center Biesse Skipper 100 Year of construction 2006. Very productive and fast. Automatic entry table. Working length 90-3000mm Working width 70-1000mm Working height 8-60mm Configuration per page: Milling head 3.5 kW, 7000-18000 rpm 29+8+2 drill heads 1 groove saw D.150mm direction X Software BiesseWorks. CD included. Condition very good ! Fully functional. Automatic system of central lukrikazion and extraction hoods. Complete with safety barriers, transport elements and CE points. CE certificate and full documentation included Need for repair: 1 pcs. safety carpet

Working size X 3000 ,Y 1000 mm Thickness 60 mm Vertical Boring spindle 29 Horizontal boring spindles in X 8 Horizontal boring spindle in Y 2

Working area 2500x900x70 mm Software BIESSEWORKS Machine control PC control Rotation speed max rpm 18000 Number of Horizontal spindles 10 With Grooving spindle

Recording ISO 30 Connection BIESSE and possibly MASTERWOOD Ratio: approx. 1 : 0.7 Saw blade holder 35 mm, with side hole approx. 6 mm on pitch circle 50 mm Max. saw blade diameter approx. 165 mm BIESSE No: 9405A056

SPECIFICATIONS: Working table: 1000 x 1000 mm CNC control: Bosch CC 120 3-axis machining: X: 1050 mm Y: 920 mm Z: 110 mm 6-fold tool changer Spindle: ISO 25 Vacuum pump (VGS): 40 m³ air Total power: 12 KW Spindle motor power: 4 KW Speed: 18000 rpm EQUIPMENT: 4 spindles

Code: 0785 Brand: BUSELLATO Model: JET 6000 XL - CE Standard CNC Boring Milling Centre with 4 controlled axis for drilling, milling, contouring, cutting work on wooden elements, panels, Mdf, veneers, composite materials - CE Standard Machine structure composed of an electro-welded, standardised steel grid Technical data Working range mm 4600 x 1700 Useful passage mm 200 Useful X-axis stroke mm 5400 Useful Y-axis stroke mm 1833 Useful Z-axis stroke mm 400 X-axis speed 115 mt/min Y-axis speed 100 mt/min Z axis speed 30 mt/min N° 4 working ranges in X-axis with double "0" rows 8-position tool changer Composition: Boring head: X-axis vertical spindles 14 Y-axis vertical spindles 12 X-axis horizontal spindles 4 Y-axis horizontal spindles 8 Motor KW 2,2 - Rpm 3000/3500 Electrospindle Hp 9,5 - Rpm 24000 - ISO 30 coupling 1° Indexed circular saw unit X-Y -  ...

Description: Axis Configuration X-Axis: 3690 mm Y-Axis: 1730 mm Z-Axis: 300 mm Max Power Max Electro spindle power: 11/13 kW Max power installed: 20 kW Utilities Vacuum pump capacity: 90 m3/h Compressed air pressure: 0.6 kPa Compressed air consumption: 250 NI/1 Air connection coupling: Gas ½” Dust Extraction Dust extraction outlet: 200 Ø mm Extraction air consumption: 3200/3400 m3/h Extraction air speed: 28/30 m/s Control & Program Control: Genesis evolution runs on Windows system Machine Type 3-Axis CNC Machine Motor Type Horizontal Motor Processing Units Drilling Unit Groove Saw Tool Storage Tool Magazine Fixturing System Pods, Rails, and Clamps  ,vacuum pump: 90 m³/h, total electrical load: 20 kW, x-motion: 3,690 mm, y-motion: 1,730 mm, z-motion: 300 mm, Approx. Onsite Dimension. (l x w x h): 3,700 x 1,300 x 2,000 mm, weight approx.: 3,000 kg

C.M.S. CNC Turret Head Machining Center Model TRIAX R-65 Sn 285, 1986 IBH controller modus 1 (2) vacuum tables- each 48” deep x 60” long. (1) five station lathe section. Max. part 6.5” x 45” (2) vacuum pumps 5 hp. each. Total of (30) routers. (6) station turret with (5) routers per station. Consisting of; (2) stations of (5) routers each - 2 ½ hp. each. (4) stations of (5) routers each – 8 hp. each. Digitizing table for flat work or carving. Lathe section for spindle work (fluting, carving). Unit complete with extra parts and lots of tooling.

TECHNICAL DATA: Field X: 4320 Field Y: 1550 Workspace Z: 280 02 Main engines Kw: 8 x 2 Tool change positions: 8 x 2 Worktop: Console table Software: Fanuc 180 Number of milling spindles: 2 Max g/min rotation speed: 18000 Horizontal drill tips X: 8 Horizontal drilling tips Y: 18 Number of bars: 8 Vacuum pump: 2 Pump capacity for empty m3/h: 150 x 2 Chip conveyor belt

Description: Cabin size: 5600x700 mm Table size: 4600x2500 mm Working size: 3400x1250 mm Laser pointer: 2500x600 mmApprox. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 5,500 kg

Description: CNC Machinning Center Serial number 8140101 Machine composed of: Bedplate Console Suction cup trolleys Drilling unit Milling units Grooving disc unit Head guard Control panel Cycle drive arms 4 pedals working capacity: - With all tools: 2800 x 575 mm - With milling unit: 220 x 900 mm - With grooving unit: 3100 x 575 mm - Workpiece clearance height: 65 mm - Axis travel: x= 3400 mm / y= 1055 mm / z= 100 mm Tooling: - Milling cutter max Ø 90 mm - Saw blade max Ø 120 mm - Drill bits max Ø 16 mm - Drill bit for fittings max Ø 35 mm Spindles: - Manual change milling cutter Ø3 - Ø16 mm - Automatic change milling cutter Ø4 - Ø20 mm - Saw blade Ø35 mm - Drill Ø10 mm Cones ISO 30 Travel speed: - X 75 m/min - Y 45 m/min - Z 15 m/min Tool speed: - Quick change milling cutter 1500/24000 r.p.m. - Milling cutter with collet 6000/18000 r.p.m. - Milling disc 3000/6000 r.p.m. - Dril ...

x-axis: 6450 mmy-axis: 400 mmz-axis: 380 mmworking lenght: 6500 mmNumber of tools: 8 St.tool taper: BT30 tool changing time: 1,2 secdiameter of tools max.: 80 mmturning speeds: 6000 U/minFeed speed: X = 34 m/min.Feed speed: Y+Z = 18 m/min.total power requirement: 8,5 kWdimensions: 9800 x 3000 x 2400/3300 mmweight: 5400 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: ESSETEAM SPRINT B12 CNC Machining Centre Working range of the X axis: 3000 mm Y axis useful working range: 1000 mm Maximum piece thickness (with movable shelves or Bakelite top): 120 mm Maximum piece thickness (with rexilon top): 200 mm X axis travel: 3350 mm Y axis travel: 1550 mm Z axis travel (with moving floors or Bakelite top): 200 mm Z axis travel (with rexilon table): 280 mm Maximum speed in X axis: 85 Maximum speed in Y axis: 85 Maximum speed in Z axis: 25 Worktop height: 920 mm Static frequency converter: 7.5 kW Installed electrical power: 20 kW Suction mouth diameter: 180 mm Minimum suction speed: 30m/sserial number: 95,120,038, Approx. Onsite Dimension. (l x w x h): 6,000 x 3,650 x 2,000 mm, weight approx.: 4,500 kg

Working range X mm: 7200 Working area Y mm: 2010 Working area Z mm: 300 No. 2 working areas mm: 2700 x 1500 Main motor kW: 11 Tool change stations 12 Machine table: console table Speed max rpm: 18000 Tool clamping system: HSK 63F Number of consoles 8 Vacuum pump: Yes Total connection kW: 78 Weight Kg: 12,300

Description: Drill head: DH15 6H 1S with 15 spindles vertical spindles: 9 horizontal spindles: 6 1 grooving saw in X-direction with scoring function Milling unit: also for 3-sided routing Clamp transport system for guiding the workpieces in the longitudinal direction Workpiece width: infinitely adjustable up to 920 mm via lateral stop Additional device for narrow workpieces (70 - 180 mm) 1 grooving saw in X-direction with scoring function x-motion: 280 - 3.000 mm, y-motion: 70 - 920 mm, z-motion: 10 - 50 mm, software: TPACAD, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,650 x 1,950 mm, weight approx.: 850 kg

Description: WOOD ROUTER CNC SPEED 2010 Very few operating hours, neat and tidy condition of the machine. Space-saving Speed 2010 model for series production of various materials. Solid wood, chipboard, fiber, composite & abrasive materials Thermoplastics & thermosets , Elastomers Specially developed for nesting applications Including the following special equipment Vacuum table - new price: 7.420, - € net Reinforced calculator - new price: 625,- € net Technical specifications Rated voltage 400 V Repeat accuracy +/- 0.1 mm Backlash +/- 0.05 mm Working speed 50-5000 mm / min Tool length sensor HF spindle HSD 2.2 kW, air-cooled incl. holder and collet set ER25 PC, mouse, keyboard, monitor in the ergonomic computer desk on the machine CAD Rhino 7.0 software package, Beamicon2 control system, CAM Estlcam V11 Gear racks, planetary gears and profile guides on the X and Y axes Ba ...

Description: measuring range: X = 2,700 mm / Y = 1,250 mm / Z = 85 mm (other dimensions on request) resolution: 0.01 mm accuracy (tolerance): <, +/- 0.1 mm connected load: min. 2 sockets 230 Volt AC field of application incoming goods: quality inspection of delivered parts quality assurance: sample measurement directly on the production line production: for regular checking of machine settings before the start of production of a series process control (safety in production) reduction in set-up time through automatic feedback to the operator of the drilling spindles to be adjusted in the X, Y and Z directions. quality check before delivery - assembly & training by HECHT AG, possible by exclusive arrangement. - factory overhaul 2023 - 12 months warranty with max. 2-shift operation (not valid for spare and wear parts)Approx. Onsite Dimension. (l x w x h): 3,364 x 2,600 x 1,300 mm ...

x-travel: 2100 mmy-travel: 720 mmz-travel: 600 mmspindle taper: SK 40 turning speeds: 30 - 8000 U/minno. of workpieces in the magazine: 30 Stücktable surface area: 2800 x 650 mmtable load: 2500 kgtable height over floor: 900 mmrapid travel x/y/z: 30 m/minfeed speeds: X/Y/Z 0 / 30000 mm/mintotal power requirement: 25 kWweight of the machine ca.: 12000 kgdimensions of the machine ca.: 5500 x 3400 x 3100 mmCNC traveling column machining center HedeliusFurnishing:- HEIDENHAIN control TNC426- chip conveyor- Coolant system 350 / 2.5 bar- Working area hoodMachining values:- max. milling capacity: 600cm³/min- max. drilling Ø: 44 mm- max. thread Ø: M30operating hours:- control on = 68283 hours- machine on = 67782 hours- program run = 20891 hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Facilities: -Console machine with cantilever -Pneum.. Workpiece stops with double-acting cylinders -Pneum.. Assembly AIDS -additional editing fields front (4-field machining) -Handheld -C axis -Swivel sawing unit to the grooves in the X - and Y-direction -Horizontal milling unit for lock box -Plate tool changer driving with - laser positioning aid for the cleaner -autom. Central lubrication system Technical data: -Traverse path Max X: 3.259 mm -Traverse path Max Y: 1,483 mm -Maximum Z: travel 325 mm -Speed Max x: 75 m / min -Speed Max Y: 75 m / min -Maximum Z: speed 30 m / min -Workpiece thickness max: 100 mm -Spindle motor power: 7,5 kW -Main spindle speed: 1000-18000 RPM -Recording of main spindle: HSK 63F -Recording spindles: M10 with 11 mm fit -Number of vertical spindles: 14 pieces -Number of horizontal twin spindles in the X direction: 1 piece in the Y-d ...

Description: HOLZHER Pro-Master 7123 CNC Machining Centre Max Displacement Speed X-Axis: 100 m/min Y-Axis: 100 m/min Z-Axis: 25 m/min C-Axis: 60 (min^-1) Working Dimensions X: 4,100 mm Y: 1,260 mm Z: 325 mm Spindle DEFECT (More pictures and information will follow shortly) Vacuum Pump: Becker KVT 3.140 Rotary Vane Vacuum Pumps toolchanger positions: 12, x-motion: 4,100 mm, y-motion: 1,260 mm, z-motion: 325 mm, path-feed rate max. X-axis: 100 m/min, path-feed rate max. Y-axis: 100 m/min, Approx. Onsite Dimension. (l x w x h): 5,000 x 2,200 x 2,400 mm, weight approx.: 4,300 kg

axis stroke (X,Y,Z): 2500x1300x160 mmNumber of spindle head vertical: 1 St.Number of spindles head horizontal: 0 St.Number of tools: 16 St.Year: 2023 Weight: 1500 kgDimensions (L/W/H): 3400x2250x1900 mmMotor output: 2,2 kWControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max Machining Dimentions : 3200x1190x70 mm Min Machining Dimentions : 200x70x8 mm Drilling head 15 spindles include sawing unit in X direction Linear tool changers 6

Description: Total connected load 12 kW Workpiece length 200 - 2500 mm Workpiece width 70 - 850 mm Workpiece thickness 10 - 60 mm serial number: 0-250-05-4772, total electrical load: 12 kW, software: WoodWob5, Approx. Onsite Dimension. (l x w x h): 2,950 x 1,540 x 1,895 mm, weight approx.: 1,450 kg

CNC vertical machining center DRILLTEC Type: V-200 Optimat BHX055 Year of construction: 2021 only 564 operating hours Workpiece length 200 - 3050 mm incl. roller conveyor Workpiece width 70 – 850 mm Workpiece thickness 12 – 60 mm Workpiece weight max. 35 kg Speed of axes X/Y 50 m/min., Z 15 m/min. Vertical Drill Gear V13/32 mm High Speed 2 rows of drill bits, each with 5 drill bits in parallel in X-direction 1 row of drill bits with 5 drill bits in Y-direction Total drill length 70 mm Drill diameter max. 35 mm Spindle spacing 32 mm Horizontal drill gear with 4 spindles (2 right, 2 left) in X-direction, can be called up individually, drill spacing 32 mm Horizontal drill gear with 2 spindle (1 right, 1 left) in Y-direction, can be called up individually Groove saw in X-direction, diameter 100 mm Tool change spindle HSK 63 and converter 10 kW Tool diamet ...

Power Control PC85, Woodwop, ATC 12-speed, A lot of accessories, Gluing unit, ... 2 retractable and extendable changing tables, two-part clamping table with 2 processing stations for pendulum occupancy, edge height max. 65 mm, chip and remnant disposal, drill head 17 spindles, main spindle 14.5 KW, speed 24000 1/min Incl. many accessories Condition: dismantled

Description: ATTENTION: Location 35614 Aßlar, Germany Well-maintained HOMAG Optimat BAZ 311/52/K CNC machining center with HOMAG Optimat TBA 330/20/16 vacuum feeder, main spindle with Flex5 interface and web edge press unit. ,The main spindle was replaced at the beginning of March 2024 and the costs were EUR 19,000! HOMAG Optimat BAZ 311/52/K, machine no. 0-201-21-4391 HOMAG Optimat TBA 330/20/16, machine no. 0-205-21-4383 Workpiece length: - Single occupancy with tool diameter. 25mm max. 5200mm - Pendulum assignment with tool diameter. 25 mm max. 2150 mm with pendulum occupancy Workpiece width front stop: - max. 1525 mm with tool diameter 25mm - max. 1525 mm with web edge pressing unit - max. 1450 mm for all units Workpiece width stop at the back: - max. 1730 mm with tool diameter 25mm - max. 1650 mm with web edge press unit - max. 1600 mm for all units Main spindle: - Motor  ...

Description: - Workpiece length  , All units max. approx. 5200 mm  , Milling cutter 25 mm max. approx. 5375 mm - Workpiece width  , Rear stop for all units max. approx. 1400 mm  , Rear stop cutter 25 mm max. approx. 1550 mm  , Front stop for all units max. approx. 1150 mm  , Front stop milling cutter 25 mm max. approx. 1220 mm - Main spindle 18.5 KW with C-axis  , Speed 0 - 24000 rpm - 72-speed chain changer - Milling spindle 6 KW - LED console position indicator - Chip conveyor belt and articulated belt conveyor (Further tools and units for the tool changer are not included within delivery. Availability depends on the delivery of the new machine. A transport rack from HOMAG is required for transportation of the dismantled machine. This results in costs of EUR 6,500,-- (plus tax). After the transport rack has been returned to Helmut Meier (Germany Burgthann), ...

Description: Floor size: 6600 x 1290 mm . No. 12-position tool changer. Main spindle with No. 9-tool drilling head. With auxiliary edging head equipped with No. 3 edge slots magazine of adjustable size, size range from: 10mm to 600mm by interchanging the slots. Present two SIEMENS vacuum pumps with NASH ELMO fans.  , Y-axis travel: 1750mm Z-axis travel: 250 mm X-axis travel: 6000 mm  , Control: OMATIC  ,Approx. Onsite Dimension. (l x w x h): 8,000 x 4,000 x 2,450 mm, weight approx.: 5,000 kg