CNC 5-axis gantry milling machine Jobs JomaX 265 W Year of construction 2016 Siemens 840D SL CNC controller Panel size 25,000 x 5,000 mm (10 panel panels) Plate field load per panel field max. 10,000 kg Rapid traverses X,Y,Z/W 28,000/8,000 mm/min. C/A axis 30°/s Distance spindle nose ~ table max. 3,900 mm Distance between uprights 6,000 mm Travel X 28,000 mm Y 6,500 mm Z 1,500 mm 2-axis NC swivel milling head. C 400 (+/- 200°). A 220° +/- 110° Spindle holder HSK-A100 Spindle drive power 42/53 kW Spindle torque max. 1,337/1,687 Nm Spindle speeds up to 3,000 rpm. 1-axis angle milling head 90° BUSS With C-axis +/-200° Spindle holder HSK-A100 Spindle drive power 30/37 kW Spindle torque max. 955/1,178 Nm Spindle speeds up to 2,800 rpm. Vertical milling head BUSS Spindle holder HSK-A100 Spindle drive power 45/56 kW Spindle torque max.1,433/ ...
VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...
WALDRICH COBURG 17S-10 FP 300 NC gantry milling machine built in 1989 in Germany is used for machining oversized workpieces, as well as many smaller workpieces at the same time. The machine equipped with a stable work table and indestructible components, allows for performing tasks such as milling, drilling and threading with the utmost precision, guaranteeing maximum process optimisation in a wide range of industries. Workpieces with a maximum weight of 60 tonnes are machined in five axes (X,Y,Z,W,C) using tools taken from a chain magazine located on the left side of the machine. This process is fully automated thanks to the special systems in the magazine responsible for automatic tool change and clamping. The WALDRICH COBURG CNC gantry milling machine is also equipped with a reliable spindle, additional angle milling heads (2 rotary heads, 1 Fork type head) and an intuitive SIEMENS ...
CNC Gantry Type Milling Machine for extra large workpieces. Manufacturer Waldrich Coburg. Model S 22-10 GM 500 NC/16 m. Year 1989. Overhauled/Modernised/Retrofitted 2008. Control Siemens 840D control retrofitted. Table size 15000 x 5000 mm. Table load max. 15000 kg/m². Distance between the columns: With column covers 5800 mm. Without column covers 6000 mm. Distance spindle to table max. 5000 mm. Travels: Gantry longitudinal travel X 16000 mm. Saddle cross travel Y 6800 mm. Milling ram vertical travel Z 2000 mm. Crossrail vertical travel W 3400 mm. Milling spindle Ø front 200 mm. Spindle motor rating 150 KW. Spindle speed range 6 - 750 rpm. Gear steps 2. Torque max. 12900 Nm. Spindle taper ISO 60. Ram section 630 x 680 mm. Proposal Number V(F)-6720