The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Category: lathes / CNC Carousel Turning Machines
date: 23.04.2024 add to watchlist
Machine: DÖRRIES VCE 1600/140 SM
item-No.: 163637324
New in: 2008
used

swing diameter: 1600 mmturning height: 1285 mmControl: Siemens 840 D turning speeds: 400 U/minx-travel: +- 950 mmz-travel: 1100 mmworkpiece weight: 9000 kgpower capacity: 80 kWTorque: 19900 Nmtable diameter: 1400 mmweight of the machine ca.: 42 tdimensions of the machine ca.: 7600 x 5200 x 5400 mmDörries 7, Machine number V-800294Crossbeam: -Cross beam travel: 600 mmRam: -Ram cross section: 250 x 250 mm (immersion diameter: 340 mm) -Ram travel 1100 mmEquipment/accessories: -Tool magazine -Own filter system -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: lathes / CNC Carousel Turning Machines
date: 23.04.2024 add to watchlist
Machine: DÖRRIES VCE 2400 / 220 MC
item-No.: 163227096
New in: 2008
used

swing diameter: 2400 mmturning height: 2145 mmControl: Siemens 840 D turning speeds: 250 U/minSpeed range - c-axis: 0,0025 - 3,15 U/minSmallest input increment of the c-axis: 1/1000 °speed steps of main gearbox: 2 x-travel: +-1350 mmz-travel: 1500 mmPositioning of the crossbar - grid spacing: 100 mm: 400 mm/minmachine table: power capacity: 100 kWdiameter: 2200 mmTorque: 35700 Nmworkpiece weight: 17000 kgRight crossbar support: bit feeder section: 250 x 250 mmImmersion diameter: 340 mmx-travel: +- 1350 mmz-travel: 1500 mmDrilling and milling device: Distance of m.spindle to upper edge of t. table: 62,5 mmpower capacity - milling spindle: 37 kWtotal power requirement: kWweight of the machine ca.: 62,5 tdimensions of the machine ca.: mcrossbar adjustable! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: lathes / CNC Carousel Turning Machines
date: 23.04.2024 add to watchlist
Machine: DÖRRIES VCE 2400/200 SM
item-No.: 163568379
New in: 2008
used

swing diameter: 2400 mmturning height: 2445 mmControl: Siemens 840 D feed range: 0-18000 mm/mintable diameter: 2000 mmmax. table load: 17000 kgtotal power requirement: 100 kWweight of the machine ca.: 75 tdimensions of the machine ca.: 10.000 x 5.500 x 7.100 mmDörries 2, machine number V-800289 with hydraulical chuck, without milling functionCrossbeam: -Travel crossbeam: 1000 mm (100 mm steps) -Crossbeam support travel: ± 1350 mm Ram : -Cross section of ram: 250 x 250 mm (minimum immersion diameter:380 mm) -Travel ram: 1500 mmEquipment/accessories: -No driven tools -Tool changer/head changer 72 times -Hydraulic chuck -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: lathes / CNC Carousel Turning Machines
date: 23.04.2024 add to watchlist
Machine: DÖRRIES VCE 2800 / 250 SM F
item-No.: 163568378
New in: 2008
used

swing diameter: 2800 mmturning height: 1195 mmControl: Siemens 840 D turning speeds: 224 U/minx-travel: +-1600 mmz-travel: 1100 mmmachine table: diameter: 2500 mmworkpiece weight: 25000 kgpower capacity: 80 kWTorque: 35900 Nmtotal power requirement: kWweight of the machine ca.: 66,5 tdimensions of the machine ca.: mfaceplate diameter: mmDörries 6, Machine no. V-800293- Fixed crossbeam, no tool driveRam -Cross section of ram: 250 x 250 mm -Travel ram: 1100 mmEquipment/accessories: -Tool changer revolver 4-times in the ram -Own filter system -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: lathes / CNC Carousel Turning Machines
date: 23.04.2024 add to watchlist
Machine: DÖRRIES SCHARMANN Contumat VC 5000/450 MC
item-No.: 161523657
New in: 2009
used

faceplate diameter: 4500 mmswing diameter: 5000 mmturning height: 2645 mmcontrol: Siemens 840 D cross rail adjustment - vertical: 1500 mmmax. ram stroke: 2000 mmram head dimension: 300 x 300 mmfaceplate turning speed range: 0,4 - 95 U/minmain drive: 2 x 80 kWfaceplate load max.: 80.000 kgEquipment / Accessories:- C-axis driven tools HSK 100, 37 kW, 3000 rpm- hydrostatic guides of the linear axes- UWFK milling head 500 Nm +/- 90°, tool and workpiece measurement- tool and process monitoring ARTIS CTM system- workspace visualisation via video camera on the support- tool magazine (arranged on the floor) for turning and milling tools as well as storage for milling heads- work area protection completely closed with automatic covering of the chip chutes- coolant system with filter system, chip conveyor- various tool holders- documentation The data for this ad was created with ModulMWS - the ...

Category: lathes / CNC Carousel Turning Machines
date: 20.09.2023 add to watchlist
Machine: EMSIL HVTL 60/80 CNC Carousel Turning Machines
item-No.: 158772943
New in: 2016
used

Vertical Turning Lathe EMSIL HVTL 60/80. faceplate diam - 6000 mm max turning - 12000 mm max height of workpiece - 6500 mm max. workpiece weight - 100 tons With C-axis

Category: lathes / CNC Carousel Turning Machines
date: 20.09.2023 add to watchlist
Machine: EMSIL VTL 60/63 CNC Carousel Turning Machines
item-No.: 158772944
New in: 2016
used

Vertical Lathe EMSIL VTL 60/63. faceplate diam - 6000 mm max turning - 6300 mm max height of workpiece - 3500 mm max. workpiece weight - 150 tons With C-axis

Category: lathes / CNC Carousel Turning Machines
date: 14.02.2024 add to watchlist
Machine: FKD 30CNC CNC Carousel Turning Machines
item-No.: 124292683
New in: 2017
used

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

Category: lathes / CNC Carousel Turning Machines
date: 14.02.2024 add to watchlist
Machine: FKD 40/60CNC CNC Carousel Turning Machines
item-No.: 124292580
New in: 2017
used

Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets

Category: lathes / CNC Carousel Turning Machines
date: 14.02.2024 add to watchlist
Machine: FKD FKD50CNC CNC Carousel Turning Machines
item-No.: 145170792
used

Face plate diameter: 4200mm Swing diameter: 4950mm Turning height: 3000mm Ram: 300mm x 300mm (Z-Stroke: 2100mm) Workpiece weight: max. 30t Accessories: PickUp station Control 840D Sl Machine was completely overhauled, machined and rebuilt.

Category: lathes / CNC Carousel Turning Machines
date: 22.04.2024 add to watchlist
Machine: GORBREX TKV525 h=2200 mm CNC Vertical Turning Machines
item-No.: 106184401
New in: 2014
used

This vertical lathe was built in 2014 for our customers. At that moment, he lost a contract work for this machine. That's why he wants to sell this machine. This machine is under power. Delivery time: immediately Control: Siemens 840 d Support number: 2 pcs (one is cnc controlled, conventional second) Turning diameter: 2500 mm Height of turning: 2200 mm! Table diameter: 2250 mm Table load: 16 000 kg Max table speed: 120 RPM Main motor power: 55 kW

Category: lathes / CNC Carousel Turning Machines
date: 23.04.2024 add to watchlist
Machine: HANKOOK VTC 3040 E
item-No.: 162562195
New in: 2023
used

faceplate diameter: 3.000 mmswing diameter: 4.000 mmturning height: 2.500 mmControl: Fanuc 0i-T max. workpiece weight: 30.000 kgtable:: table diameter: 3.000 mmtable speeds: 1 - 100 1/minpower capacity - table: 60/75 kWC - Axis:: Working speed: 0 - 180 °/minmax. table speed: 0,5 1/minturret slide:: Shank diameter: 50 mmspindle cone: ISO 7/24 No.50 Spindlespeed: 15 - 1.500 min/-1power capacity - Tool Spindle: 22 / 26 kWram cross section: 300 mmaxis stroke:: x-axis: 2.335 mmz-axis: 1.600 mmcross rail adjustment: 2.000 mmTool-Presetter:: tool taper: MAS BT 50 number of toolpositions: 24 (2x12) pos.max. tool weight: 90 kgdraw bolt: DIN.69872 feeds:: rapid feed (X / Z): 8 m/minrapid traverse of the crossrail: 500 mm/mintotal power requirement: - kWweight of the machine ca.: 95 tdimensions of the machine ca.: 14,0 x 7,4 x 9,0 mDocuments: Coolantsystem: 4-Jaw-Chuck: Automatic Tool Cha ...

Category: lathes / CNC Carousel Turning Machines
date: 18.03.2024 add to watchlist
Machine: MANTEGAZZA 410 CNC Carousel Turning Machines
item-No.: 157211904
used

Lathe Mantegazza 410

Category: lathes / CNC Carousel Turning Machines
date: 12.03.2024 add to watchlist
Machine: MARIO CARNAGHI  CNC Carousel Turning Machines
item-No.: 161466395
new

Mario Carnaghi CNC Vertical Boring Mill FEATURES: Siemens 840DE SL CNC Control 12-Position Automatic Tool & Attachment Changer 40-Station Automatic Tool Magazine Hydrostatic Table Vertical Ram with Milling Spindle Vertical Milling & Drilling Attachment Right Angle Milling Attachment Universal Milling Attachment Through Spindle Coolant & Flood Coolant Dual Dive 108 HP (81 KW) Table Motors High Resolution Heidenhain Scales & Encoder Renishaw RMP 60 Probe Renishaw NC-4 Milling Tool Probe Full Machine & Operator Enclosure Chip Conveyor CAPACITY: Table Diameter 196.85" (5000mm) Turning Diameter .. 236.22" (6000mm) Maximum Turning Height 98.42" (2500mm) Maximum Stroke of Vertical Rams ... 59.05" (1500mm) Ram Cross Section . 13.77" x 13.77" (350x350mm) Cross Rail Travel . 47.24" (1200mm) Ram Saddle Travel, X-Axis . 175" (4445mm) Turning Tool .. Cap ...

Category: lathes / CNC Carousel Turning Machines
date: 26.02.2024 add to watchlist
Machine: PENSOTTI TE 2000 CNC Carousel Turning Machines
item-No.: 147260927
used

Table diameter 2.000 mm Working diameter 2.000 mm Machine under retrofit/rebuilding to install CNC Mechanical ready, totally rebuilt.

Category: lathes / CNC Carousel Turning Machines
date: 07.02.2024 add to watchlist
Machine: PIETRO CARNAGHI ATF 8 TM CNC Carousel Turning Machines
item-No.: 160721778
New in: 1995
used

WE OFFER AN WERY NICE CONDITION VARTICAL LATHE CNC Vertical Lathe (VTL) with C-Axis and Milling spindle & Pallet changer Pietro Carnaghi - ATF 8 TM Year 1995 NUM 1060 II CNC Control Pallet changer with 2 pallets Pallet diameter 800 mm Max. workpiece weight 1500 mm Swing diameter 1100 mm Turning diameter max. 1000 mm Turning height max. 750 mm Table drive motor 60 KW Table speeds 1.5 ~ 1000 rpm C-Axis 0.001° Milling spindle drive 23.5 KW Milling spindle speeds 12 ~ 3000 rpm Tool taper BT 50 Automatic tool changer for 80 tools Full work area guarding Chip conveyor Coolant through the spindle Paper band filtration unit Good condition High accuracies Under power for inspection Available immediately WE CAN ORGANIZE FOR CLIENTS AS WELL TRANSPORT OF MACHINE TO THEIR L ...

Category: lathes / CNC Carousel Turning Machines
date: 23.04.2024 add to watchlist
Machine: RAFAMET KCF 320/350
item-No.: 156873045
New in: 2000
used

faceplate diameter: 3200 mmswing diameter: 3500 mmturning height: 2200 mmControl: Typ 840 D sl total power requirement: 51 kWweight of the machine ca.: 86 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: lathes / CNC Carousel Turning Machines
date: 22.04.2024 add to watchlist
Machine: RAFAMET KCI 320/400N CNC Carousel Turning Machines
item-No.: 163345382
New in: 2011
used
Price: 680.955 €

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

Category: lathes / CNC Carousel Turning Machines
date: 20.09.2023 add to watchlist
Machine: REM SC 33 CNC 1S CNC Carousel Turning Machines
item-No.: 158773360
New in: 2010
used

MAIN TECHNICAL CHARACTERISTICS 1. Max. machining diameter mm 3.300 2. Min. machining diameter mm 200 3. Max. height of the part to be machined mm 2.000 4. Max. load on the table to 18 5. Table diameter mm 3.000 6. Table speed range rpm 1 ÷ 100 7. Main AC motor kW 100 8. Vertical stroke of the cross rail mm 1.500 9. Cross rail feed mm/min 400 10. Driving motors kW 7.5 11. Ram vertical stroke (Z axis) mm 1.250 12. Ram cross section mm x mm 225x225 13. Horizontal stroke (X axe) mm 1.850 14. Feed range (X and Z axis) mm/min 1 ÷ 6000 15. Rapid traverse (X and Z axis) mm/min 10.000 16. Feed motors torque (X and Z axes) Nm 22 CNC Equipment 1. Equipment type Fanuc 18iTb Overall Dimensions 1. Floor space m 7.1x 6 2. Max. height m 6.3 3. Machine weight (excluding special accessories) to 54

Category: lathes / CNC Carousel Turning Machines
date: 20.09.2023 add to watchlist
Machine: REM SC 53 CNC Carousel Turning Machines
item-No.: 158515842
New in: 2015
used

REM SC 53 Vertical Turning Lathe with Fanuc CNC Control. Technical Data: - Double Column / Double Heads lathe - Max. swing diameter: 5300mm - Max. turning height: 2270mm - Table diameter: 4700 mm - Load capacity: 25000 kg

Category: lathes / CNC Carousel Turning Machines
date: 23.04.2024 add to watchlist
Machine: REM SC33-CNC-1S-MS-3H
item-No.: 157792250
New in: 2009
used

faceplate diameter: 3000 mmswing diameter: 3500 mmturning height: 3200 mmControl: Fanuc type: Series 320i Model Aslide adjustment: 1750 mmram head dimension: 300x300 mmx-axis: 2700 mmTable load: 30000 kgmain drive motor: 100 kWTool changer: 16 chip conveyor: total power requirement: kWweight of the machine ca.: 89 tdimensions of the machine ca.: 8,5x6x8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: lathes / CNC Carousel Turning Machines
date: 20.09.2023 add to watchlist
Machine: REM SCR 45 - 840 Dsl Siemens CNC Carousel Turning Machines
item-No.: 158773391
New in: 2022
new

Vertical Turning center SCR 45 – 2SF - Tech data Nominal Turning Envelope Faceplate Diameter 4.500 Machining Diameter 4.600 mm Machining Heights 1.800 mm Work Piece Weight 20,000 kg Nominal Travels X-Axis Rams Carriage 2,500 mm W-Axis Elevating Cross Rail 1,200 mm Indexing step 300 mm Z-Axis Ram vertical travel 1,250 mm Work Table WorkTable Diameter 4.500 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 110,000 Nm WorkTable C axis 0.02 to 1.5 rpm Power Continuous S1 11 kW C axis Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm Z-Axis Milling Ram Ram Size Turning Milling 250 by 250 mm Turning / MillingTool type KM 63 - ISO 50 DIN 69871 Ram Milling Capability Ram Speed 0 to 2,500 rpm Power Continuous S1 40 kW Torque Continuous S1 1.400 Nm Toolchanger Number Of Tool Magazines two ATC for 12 turning ...

Category: lathes / CNC Carousel Turning Machines
date: 20.09.2023 add to watchlist
Machine: REM SCR 50 CNC 2S CNC Carousel Turning Machines
item-No.: 158773390
New in: 2022
new

CNC VTL ,2 heads ,2 disc magazines REM SCR 50 CNC 2S

Category: lathes / CNC Carousel Turning Machines
date: 27.03.2024 add to watchlist
Machine: SCHIESS 3 DKE 280 CNC Carousel Turning Machines
item-No.: 158965851
New in: 2008
used

Carousel Lathe - Single Stand Schiess 3 DKE 280 Manufacturer: Schiess GmbH overhauled: 2008 Control Siemens ... Sinumerik 840 E workpiece diameter... 3000mm Table diameter ... 2800mm table load ... 18000kg workpiece heights ... 1800mm Axis Z ... 1400mm Tool changer ... 12 Main engine power ... 50kW Machine weight ... 40000kg The machine is in good condition, possible to test under power.

Category: lathes / CNC Carousel Turning Machines
date: 12.03.2024 add to watchlist
Machine: SCHIESS 80DF Siemens 880 CNC Carousel Turning Machines
item-No.: 159963720
New in: 1996
used

Single column CNC Vertical Lathe Maker : Schiess New : 1988 /1996 CNC update Model : 80 DF Control : Siemens 880 Table dia : 7500 mm Working dia : 8400 mm Working height : 7200 mm Table load cap : 300 tons Table rotate speed : 0~20 rpm Ram stroke : 3000 mm

Category: lathes / CNC Carousel Turning Machines
date: 23.04.2024 add to watchlist
Machine: SCHIESS - PENSOTTI NDM 160 - 2000
item-No.: 163582878
New in: 1989
used

faceplate diameter: 2000 mmswing diameter: 2400 mmturning height: 1800 mmx-axis: 2000 mmy-axis: 2000 mmz-axis: 1200 mmram adjustment: 1200/1500 mmfaceplate turning speed range -stepless-: 2,3 - 250 U/minboring spindle drive: 27 kWmilling drive motor: 27 kWspindle turning speed - stepless: 0-1200 U/mintool magazin:: 12 fachtool taper: 50 ISOcontrol: Siemens 840 D sl chip conveyor: 2 workpiece weight: 15 ttotal power requirement: 61/92 kWweight of the machine ca.: 56 tdimensions of the machine ca.: 10 x 10 x 7 m mMachine type: CNC carousel latheMachining Center - VerticalRectangular ram head suitable for turning, milling, drilling, drilling andThreading.The machine was overhauled and modernized in 2014automatic 12-fold tool changerC-axis driven tools• Tappet, hydrostatic bearing completely overhauled• Hyfraukik overhauled• Drives and ball screws renewed• Control conversion complete ...

Category: lathes / CNC Carousel Turning Machines
date: 07.12.2023 add to watchlist
Machine: SCHIESS FRORIEP 450 NC CNC Carousel Turning Machines
item-No.: 141287564
New in: 2005
used

Plate diameter 4200 mm Maximum turning diameter 4600 mm Max workpiece height under the cross member 4000 mm Max workpiece weight 100 t Travel RAM horizontal 2600 mm / min Travel RAM vertical 2000 mm / min Tool holder (powered tools) ISO 50 Table speed 40 rpm Main drive 120 kW Number of gear stages 4 Total connection value 180 kW Max torque on the flat disc 40000 kpm Max cutting force per support 10000 kp Crossbar support right and left Largest vertical path of the Chisel slider 2000 mm Cross-section of the chisel slider 285 x 310 mm Adjustment path of the crossbar 3500 mm Total weight of the machine 115,800 kg Accessories Automatic lubrication of the cross-bar guide on the stand Hydraulic weight compensation of the chisel sliders Milling spindle and C-axis c-axis 360,000 positions

Category: lathes / CNC Carousel Turning Machines
date: 22.04.2024 add to watchlist
Machine: SEDIN 1512 CNC Carousel Turning Machines
item-No.: 161794994
used
Price: 35.000 €

Rotary lathe SEDIN 1512 Rotary lathe Model: SEDIN 1512 Control Type: Conventional Country of origin: Russia AFTER RENOVATION AND NEW ELECTRICS – we can earn extra CE Specifications: Table diameter: 1100 mm Swing diameter: 1100 mm Swing over bed: 1000 mm Maximum workpiece height: 1200 mm Tool holder / capacity: 5 Workpiece weight: 3.2 tons Total power requirement: 30 kW Machine weight approx.: 16.5 tons Machine dimensions about L x W x H: 2.8 x 2.9 x 3.65 m Control cabinet dimensions: 830 x 640 x 2050 mm Additional information: -NEW ELECTRICS -AFTER REFURBISHMENT Information about the crossbar: Vertical travel: 500 mm Feed: 18 degrees; 0.45 - 10 mm/min Transverse travel: 600 mm Feed: 18 degrees; 0.45 - 10 mm/min Vertical head specifications: Feed: 18 degrees; 0.45 - 10 mm/min Vertical adjustment: 400 mm Horizontal adjustment: 600 mm 4x steel tool holder  ...

Category: lathes / CNC Carousel Turning Machines
date: 23.04.2024 add to watchlist
Machine: STANKO 1525 / 2008
item-No.: 158657985
New in: 1987
used

faceplate diameter: 2200 mmswing diameter: 2500 mmturning height: 1600 mmControl: Siemens chip conveyor: total power requirement: 100 kWweight of the machine ca.: 35 tdimensions of the machine ca.: mvertical lathe with two RAM, faceplate Ø 2000 mm, SPS supportedcontrol for storable cycles, RAM/channel 1 two Capto recordings C8 withInternal tool cooling, RAM/channel 2, two Capto mounts C8 withinternal tool cooling, Chip conveyor / spindle Z-axis as new / without KSSFilter unit / 3 glass scales are missing / control panel is disconnected but complete andOK, a 90 degree angle is missing from the control panel armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: lathes / CNC Carousel Turning Machines
date: 20.09.2023 add to watchlist
Machine: TITAN SC 44 CNC Siemens 840D CNC Carousel Turning Machines
item-No.: 158773389
New in: 2011
used

For sale CNC Vertical Turning Lathe. Technical Details: Faceplate Diameter: 4.000 mm Max. Turning Diameter: 4.400 mm Machining Height: 2.050 mm Max. Work Piece Weight: 18 tons Siemens CNC Control

Category: lathes / CNC Carousel Turning Machines
date: 28.03.2024 add to watchlist
Machine: TITAN SC22-27 CNC Carousel Turning Machines
item-No.: 161052400
used

- Max. Machining Dia. 2630 mm - table dia. 2000 mm - machining height under cross rail 1500 mm - Workpiece weight 12,000 kg - plate speed 1 -140 rpm - right working support (turret) vertical travel (Z axis) 760 mm - left working support vertical travel (Z axis) 1200 mm - Working feed range 0.05-5 mm/red. - machine weight 36 tons Siemens Control SINUMERIK

Category: lathes / CNC Carousel Turning Machines
date: 13.10.2023 add to watchlist
Machine: TOSHULIN SK 25A CNC Carousel Turning Machines
item-No.: 162613755
New in: 1999
used

Tos hulin CNC Sinumerik 840 C Year 1999 Table dia : 2500 mm Max turning did 3000 mm Max Turning hight 2000mm under power

Category: lathes / CNC Carousel Turning Machines
date: 27.03.2024 add to watchlist
Machine: TOSHULIN SKIQ 12 CNC CNC Carousel Turning Machines
item-No.: 162749532
New in: 2010
used

Carousel lathe - Single column SKIQ 12 CNC Manufacturer: TOSHulin Year: 1989/ GC: 2010 Control Siemens ... Sinumerik 840 D Max. workpiece diameter ... 1500mm Table diameter... 1250mm Max. table load ... 12000kg Max. workpiece height ... 1570mm Axis Z... 1000mm Average of the grinding piece ... 800mm Number of positions in the tool changer ... 15 Face plate diameter ... 1250mm Max. ram stroke ... 1000mm Max. workpiece weight ... 8000kg Rapid traverse ... 8000m/min Total Power Requirement ... 63kVA Main engine power ... 40kW Machine weight... 22000kg The machine is in good condition, possible to test under electricity.

Category: lathes / CNC Carousel Turning Machines
date: 20.09.2023 add to watchlist
Machine: UMARO SC 53 CNC Carousel Turning Machines
item-No.: 158772941
New in: 2005
used

Conventional Vertical Lathe UMARO SC 53 faceplate diam - 4700mm max turning - 5300mm max height of workpiece - 2270mm max. workpiece weight - 25T

Category: lathes / CNC Carousel Turning Machines
date: 27.02.2024 add to watchlist
Machine: WMV Niles DKZ 4000 CNC Carousel Turning Machines
item-No.: 75513500
New in: 1967
used

Technical data: Double column vertical turret lathe CNC control Siemens 802 D Weight 66 to 63 kw Dimensions 13,600 x 9,800 x 6,750 mm Faceplate diameter 3,500 mm Maximum workpiece height 2000 mm Max support adjustment 30 ° Maximum workpiece diameter 4,000 mm Maximum workpiece diameter with page support 3,750 mm Number of support 2 Max turning height 1,400 mm Maximum workpiece weight 25 to Max speed 30/min Min. speed 1/min