hydraulic internal clearing machine in good operational condition Clearing stroke:1.500mm Tension: 16,000 KG â?¢ the drawing head shot in the drawbridge:85mm Through-hole in the clamping table: 120mm Workpiece diameter: max. 750mm (due to the machine body of the tool feeder) Cutting speed: hydraulically infinitely adjustable from 1 m/min to 6m/min Return speed: hydraulically infinitely adjustable from 5m/min to 30m/min Dimensions of the machine: (bx t x h) approx. 6,600 mm x 800 mm x 1,500mm (without working area) Power supply / connection power: 380Volt 50 HZ /8.0 KW Accessories / Optional equipment: â?¢ the machine has an electrical control for clearing lifting movement â?¢ the machine has an integrated cooling cutting system â?¢ the machine has a flanged machine bed with a manual tool feeder The machine is ideal for the produ ...
Description: fabrication number 4044/4 , connected load 9 kW , diameter of the table 800 mm , diameter of the 4-jaw chuck 310 mm , joint stroke approx. 500 mm , including workshop cabinet and shaper accessories weight approx.: 6,200 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 2,100 x 3,300 mm
used vertical hydraulic internal clearing machine with 3 clearing points in very good condition Pulling power:8.000 KG Clearance length: 1000mm Bgno2qtoyx Clearing: 3 pieces (4 pieces) Distance between clearing points:100mm Mounting diameter of the drawing heads3 x x 85mm Workpiece diameter: max. 1x 460mm / 2x 198mm / 3x 98mm Cutting speed: hydraulically infinitely adjustable from 1m/min up to max. 7m/min Return speed: hydraulically infinitely adjustable from 5 to max. 25m/min Space requirement of the machine (b x t x h) approx.:1400 x 2000x 3600mm (without service & operator environment) Power supply / connection value: 380Volt 50 HZ / 6.5 KW Accessories / Optional equipment: -manual and automatic clearing operation - Drawbridge for 3 clearing points - Workpiece table for 4 clearing points (only usable with special pullheads) - automatic tool feeder - tension dis ...
Tractive effort: 63 to Length: 2000 mm Room set: 3 piece
Description: Technical details: Quantity 3 pieces, additional information: broaching tool, broaching needle, special tool, grooving tool, slotting machine, slotting machine, slotting machine, slotting tool, slotting broach - Manufacturer: KARL KLINK, - Manufacturer: KARL KLINK (1 piece) - Type: 16 N9x4.0, Rlg 75 - Item no.: 9.10.SS42 0101668 - Manufacturer: OSWALD (2 PCS) - Type: 16 N9x4.0, Rlg 75 / 2x45°, - Item no.: 00445 11.00, length: 1250 mm, width: 18 mm, height: 33 mmweight approx.: 75 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 100 x 100 mm
Description: Technical details: Quantity 1 piece, additional information: broaching tool, broaching needle, special tool, grooving tool, slotting machine, slotting machine, slotting machine, slotting tool, slotting broach - Manufacturer: KARL KLINK, - Type: 5 H9x2.3+0.1, Rlg 12-30m/m - Length: 900mm, Width: 7mm, Height: 7mmweight approx.: 35 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 100 x 100 mm
Description: Technical details: Quantity 2 pieces, additional information: broaching tool, broaching needle, special tool, grooving tool, slotting machine, slotting machine, slotting machine, slotting tool, slotting broach - Manufacturer: KARL KLINK, - Type: 5 H9x2.3+0.1, Rlg 10-16m/m -Stanl. 834 134 WR1/136/138, - Item no.: 2.99.SS42 0981894, length: 1000 mm, width: 7 mm, height: 7 mmweight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 100 x 100 mm
Description: Technical details: Quantity 2 pieces, additional information: broaching tool, broach, special tool, groove tool, groove drawing machine, groove slotting machine, slot slotting machine, slot slotting tool, - Manufacturer: KARL KLINK, - Type: 5 N9x2.3+0.1, Rlg 20-60m/m - WN160.03.5.15, - Item no.: 4.95.SS42 0951318, - Item no.: 2.95.SS42 0942173, length: 1060 mm, width: 7 mm, height: 12 mm,weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 100 x 100 mm
Description: Technical details: Quantity 3 pieces, additional information: broaching tool, broaching needle, special tool, grooving tool, slotting machine, slotting machine, slotting machine, slotting tool, slotting broach - Manufacturer: KARL KLINK, - Type: 6 H9x2.8+0.1, Rlg 12-30m/m -Stanl. 836 134 WR1/136, - Item no.: 9.99.SS42 0991551, - Item no.: 6.98.SS42 0981110, length: 1000 mm, width: 8 mm, height: 9.5 mm,weight approx.: 75 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 100 x 100 mm
Description: Technical details: Quantity 3 pieces, additional information: broaching tool, broaching needle, special tool, grooving tool, slotting machine, slotting machine, slotting machine, slotting tool, slotting broach - Manufacturer: KARL KLINK, - - Manufacturer: KARL KLINK, - Type: 6 P9x2.8+0.1 , Rlg 16-40m/m - WN 160.03.6.7, length: 1060 mm, width: 7 mm, height: 12 mmweight approx.: 60 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 100 x 100 mm
Description: Technical details: Quantity 2 pieces, additional information: broaching tool, broaching needle, special tool, grooving tool, slotting machine, slotting machine, slotting machine, slotting tool, slotting broach - Manufacturer: KARL KLINK, - - Manufacturer: KARL KLINK, type: 6 P9x2.8+0.1, Rlg 16-40m/m - Stanl. 836803 WR1, item no.: 2.00.SS42 0992114, length: 1060 mm, width: 7 mm, height: 12 mmweight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 100 x 100 mm
Description: Ø inlet wire max: 1.4 mm Ø inlet wire min: 0.6 mm finished wire Ø max: 0.25 mm finished wire Ø min: 0.08 mm cross-section reduction: 24 x 13%/1 x 9.7% inlet tensile strength: 1400 N/mm² ready tensile strength: max. 3900 N/mm² number of cones: 4 cones made of: tungsten carbide cones Ø: 57-230 mm finishing capstan Ø: 135 mm matrix Ø: 28 mm speed: 7,5 - 20 m/s maximum speed: 20 m/s engine type: AC motor engine power: 15 kW, 60 A. SP350 receiving device - spool flange Ø max 350 mm weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,200 x 2,400 mm
Code 6377 Omschrijving Ruimautomaat Abrikaat Nachi Fujikoshi Type BV 2A 15 Model NUV 5 CDH Bouwjaar 1982 Capaciteit 15 Ton Max. slag / stroke 1700 mm Snelheden 7000 mm/min Vermogen 35 kVA – 50 HZ
used mechanical vertical internal clearing machine in very good condition. Pulling force at 3m/min: 3000 KG Clearance speed: 3m/min Return speed: 3m/min maximum stroke: 800mm Ropcmo87 maximum tool length: 1000mm Table area: 350mm x 220mm Table break-in: 90mm Workpiece diameter: any Dimensions (h x w x t): 1260 x 500 x 720mm Engine power: 1.1 / 1.5KW Power supply: 380 volts 50 HZ Accessories / Optional equipment: - integrated coolant / cutting agent system - Machine documentation Comment: The double spindle drive ensures a quiet and central pulling point as well as a constant clearance speed. The machine is mainly designed for the production of spring springs up to 20mm. The machine has been partially overhauled, all bearings, shaft seals and seals of the trapezoidal spindles and gearbox have been renewed. The drawing head is re-ground and adjusted, the machine body is ...
General / technical data: used mechanical vertical internal clearing machine in very good condition. Pulling force at 3m/min: 4000 KG Clearance speed: 3m/min Return speed:6m/min maximum stroke: 1000mm maximum tool length: 1200mm Table area: 450mm x 250mm Table break: 90mm Workpiece diameter: any Dimensions ( h x w x t): 1610 x 630 x 855mm Engine power: 2.2 / 3.5KW Power supply:400 volts 50 HZ Accessories / Optional equipment: - integrated coolant/cutting agent system -electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) - Central lubrication system - CE machine marking Comment: The double spindle drive ensures a quiet and central pulling point as well as a constant clearance speed. The machine is mainly designed for the production of spring springs up to 20mm. The machine has a very quiet machine ...
Manufacturer: Noise Model: RS4/1000 machines no.: 5123/706 Year of construction: 4/1989 weight: approx.: 540 KG General information / technical data: used mechanical vertical Innenräummaschineim of very good immediate quiet machine running Zugkraftbei 3m / min: 4000 KG Räummgeschwindigkeit: 3m / min and 5m / min Return speed: 10 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Engine power: 2.2 / 4,7KW Stromversorgung380 Volt 50 HZ Optional accessories: -Kühlmittel / thread cutting fluid pump electric power meter -electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) Comment: The double spindle drive ensures a quiet and central point of the train, as well as a ...
General / technical data: Manufacturer: Rausch Type: RS6/1000 Year of construction: 07/2000 Machine no.: 60305 Weight: approx. 750kg Tractive force: 60kN (80kN) Clearing speed: 4m/min Return speed: 8m/min stroke: 1000mm Maximum tool length: 1200mm Maximum workpiece diameter: Ø approx. 900mm Table opening: Ø 90mm for standard clearing mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to the floor without superstructures) Current type: 400 Volt / 50Hz – 6 / 7,5kW Accessories/ Special equipment: – electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) – integrated coolant system with check valve and drain valve – patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is energized in our wareho ...
Description: serial number: 56-0213 projection: 365 mm stroke: 10 - 250 mm max. table load: 1000 kg drive power: 6.6 kW machine is in good technical condition, by prior agreement the possibility of testing. total power requirement: 6.6 kW, weight approx.: 2,850 kg, Approx. Onsite Dimension. (l x w x h): 1,425 x 2,270 x 2,500 mm