used Boring Mills for sale

Year of manufacture: 1992 / G: 2025 Spindle diameter ... 100mm Axis X ... 1500mm Axis Y ... 1250mm Spindle speed ... 7-1120 rpm Axis W Axis Z ... 1800mm ISO 50 Turntable diameter ... 1200x1200mm The machine is in good condition, possible to test under power.

table length: 2000 mmtable width: 2000 mmtable load: 25 ttable rotating: 360 °Control: total power requirement: 4 kWweight of the machine ca.: 8,2 tdimensions of the machine ca.: 3 x 2,9 x 0,9 mBoring mill table Skoda E25A- Boring mill table Skoda E25A- Dead weight: 8,2t- Max. Clamping weight. 25t- First commissioning: 1996- Decommissioned and stored since 2014- All axes are electrically controllable and ready for operation- 360° rotary drilling table ready for operation- Dimensions: see data sheet- Heidenhain rotation measuring system with digital display ready for operation- Heidenhain linear measuring system with digital display ready for operation- Boring mill table fully functionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine : Tools for boring mill / radial drilling machine Type: MK5 5 drill rods φ 40 , 30, .. L- 280 – 400mm 3 extensions MK5 – MK4 , L-400-520mm 1 boring tool Oerlikon MK5, φ 70, 6-260 5 top-mounted milling mandrels MK5 - φ 16, 22, 27,32,40mm 2 Clarkson clamp chucks 1 MK5 boring tool, adjustable, φ 60mm 2 Shots 2 milling cutters: End mill roughing/plain φ 56x100mm, / groove milling cutter 4 milling cutters: 2 roughing/plain φ 40x12o, 2 roughing cutters 1 Reduction from MK5 to SK40 Weight: approx. 70kg kg PRICE : € 600,- ex works ! A - T-slot size: approx. 21.5mm, B-35, thread M20 16 T-slot nuts 20 pcs threaded rods M20, L-120 – 400mm 3 x 2 pcs clamping claws 4 nuts long, 6 nuts, washers 2 blocks for adjustment with adjustment screw 4 blocks 80 x 60 x40mm ( underlay )

table diameter: 5600 mmtable load: 150 tx-travel: / mmtotal power requirement: 88 kWweight of the machine ca.: 55 tRound table dm 5600 mm / 150 to loadRound table dia. 5600mm / 150 to load Equipment: Table with drive motorStatus: decommissioned since 1980Machine type:C.T.FDiameter core faceplate: ?3000 mmDiameter ring faceplate: ?5600 mmCore and ring faceplate can be coupled: yesFaceplate divisible into segments: noMax. workpiece weight: 150000 kgTable weight approx.:55000 kgDimensions: Dm 5600 x H 1500 mm filming operationSpeed: 0.1 - 20 rpmRotation levels:4Drive power: ?88 KW milling operationSpeed: 0.0002 - 0.2 rpmPeripheral speed (5000 mm):?3140 mm/minDrive power: ?11 KWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HBM W100A, ISO, NO TAILSTOCK

table length: 2200 mmtable width: 1500 mmtable load: 6-8 t1500 x 2200 x 800mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAZAK-SUPER TURBO X510,127.4"X,60.8"Y,3.9"Z,1300-WATT,MAZATROL-PREVIEW,NEW-2008 MAZAK SUPER TURBO X510 HYRIB STYLE CNC LASER CUTTING MACHINE S/N: 207568 Specifications: RATED LASER OUTPUT ... 1300 WATTS MAXIMUM WORKPIECE 120" X 60" X-AXIS TRAVEL 127.4" Y-AXIS TRAVEL 60.8" Z-AXIS TRAVEL 3.9" RAPID TRAVERSE X/Y AXIS ... 945 IPM RAPID TRAVERSE Z AXIS . 948 IPM MAX. CUTTING FEEDRATE . 945 IPM POSITIONING ACCURACY X/Y/Z +- 0.0004/19.7"/ 3.94"Z EQUIPPED WITH: MAZATROL PREVIEW 64 BIT CNC CONTROL CO2 LASER MODEL YB-L130A 8M 1300 WATT LASER CHILLER

spindle diameter: 160 mmx-travel: 10.000 mmy-travel: 3.000 mmControl: total power requirement: 120/63 spindel kWweight of the machine ca.: 63 tdimensions of the machine ca.: 15x3.85x7.36 mStocknumber 1210057Type of machine CNC Floortype boring machineMake WOTANType Rapid 5CBuild in 2004Type of control HEIDENHAIN iTNC 530Spindle diameter 160 mmX-stroke (mm) 10.000Y-stroke (mm) 3.800Z-stroke (mm) 700W-stroke 700 mmTool Taper Iso 50Speeds (Rpm) 1,25 - 1250Feeds (mm/R) 1 - 5000 mm/min Rapid feeds 5 mtr/min.Total Power (KW) 120 /spindel 83Lenght (mm) 14.500Width (mm) 3.850Height (mm) 7.360Weight 62.300 kg Additional informationcompletely overhould in 2004 and retrofitted by Dorries Scharmann with CNC control HEIDENHAIN iTNC 530- 4 different angular milling heads- hydrostatic spindle bearing- aerostatic guideways- coolant device- chi ...

HBM STANKO 28622

spindle diameter: 110 mmx-travel: 4000 mmy-travel: 2000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m Stocknumber 1210014Type of machine Floortype Boring MachineMake PEGARDType AF11Type of control ConventionalSpindle diameter 110 mmX-stroke (mm) 4000Y-stroke (mm) 2000Z-stroke (mm) 300/750Table dimensions (mm) 1200 x 1600 mmTable rotation (degrees) 360 Tool Taper Iso 50Speeds (Rpm) 4 - 1000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HBM W75, no tailstock, MK 5

HBM W9

HBM BFP 130

SKODA WD160B floor type boring mill X Axis 3150 mm Y Axis 2500 mm Z Axis 1600 mm Table 2000x2000 mm Piece weight 20000 kg Spindle diameter 160 mm Max. spindle speed 800 rpm Spindle motor power 75 kW Length x width x height 10000.0 × 5250.0 × 6365.0 Weight 50000 kg New control.

UNION BFT 110 horizontal boring mill DRO Measuring rulers OPTIMA Electronic DRS3000 Spindle diameter 110 mm X/Y/Z/W- 1985/1620/1960/710 mm B-axis (table) 360 U-axis Faceplate radial 250 mm Table-size 1600 x 1400 mm Spindle taper SK50 Spindle speed range 6.3 - 1250 rpm Rapid traverse Y-axis of 6300 mm/min. Spindle drive motor 30 kW Total power consumption 90 kW Table load 6,3 t Faceplate 700 mm max. turning Ø for drilling: 630mm max. turning Ø for facing: 1250mm Dimensions app. 7x4.5x4.5 m Machine weight 28.6 t Ball screws Asynchronous electric motors

HBM WHN 13.8B, new 1986, CNC control system Heidenhain

FULLTONTECH TBF6111B horizontal boring machine was built in 2022 in China by Dalian Fullton Machinery Co., Ltd. The machine enables a number of complex operations to be performed, i.e. precision drilling, milling and boring, on workpieces with complex geometries and heavy weights. All these operations are performed on a stable work table, whose rotary design enables the workpiece to be machined from all 4 sides. The spindle, rotating at a maximum speed of 1000 rpm, runs on induction-hardened guideways with scrapers. The spindle has a special safety clutch which prevents the machine from being overloaded. A powerful hydraulic system, consisting of two parts, is responsible for changing the spindle speed and feed rate. The position of the head in all linear axes is in turn controlled by a NEWALL digital readout, which provides a measurement accuracy of 0.005 mm. The FULLTONTECH boring m ...

Key data: 105 mm, 1200 mm, 800 mm

Precision lathe, drilling and milling machine 4-axis CNC control Heidenhain TNC 355 with electron. Handwheel (X,Y,Z,B) 4th axis: table movement NC-controlled up to 0.001 degrees via rotary encoder Telescopic covers, Hydr. Clamping, central lubrication Ball screws, measuring device Actual value display X,Y,Z,B Cooling equipment, machine documents and manuals, etc.

HBM Knuth BO110 Axis: X: 900mm, Y: 900mm, Z: 600mm working condition, the table can move 360 degrees

Key data: 100 mm, 1600 mm, 1250 mm

DRO , TABLE 1250 X 1250

Key data: 102 mm, 1600 mm, 1250 mm

Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,600 mm Vertical Travel headstock (Y) 1,250 mm Longitudinal travel (Z) 1,500 mm Table 1,250 x 1,400 mm Table load 5 ton R.P.M. 4 – 1,250 (18x) kW 23 Volts 380 Cycles 50

Key data: 102 mm, 1600 mm, 900 mm

Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,600 mm Vertical Travel headstock (Y) 900 mm Longitudinal travel (Z) 1,520 mm Table 1,250 x 1,400 mm R.P.M. 8 – 1,600 (18x) kW 11 Volts 380 Cycles 50 Including: 3-axis Digital readout with point to point control Heidenhain 310

Key data: 102 mm, 1530 mm, 900 mm

Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,530 mm Vertical Travel headstock (Y) 900 mm Longitudinal travel (Z) 1,500 mm Table 1,250 x 1,400 mm R.P.M. 8 – 1,600 (18x) kW 11 Volts 380 Cycles 50 Including: Digital readout

spindle diameter 130 mm - ISO 50 tool - rated power of the spindle rotation motor 18.5 kW - installed power 4 0kW - spindle drive motor speed range 722-1455 rpm - spindle rotation range 2.25-900 rpm, 27 degrees - disc rotation range 2.25-180 rpm, 18 degrees - X axis feed speed range 0-5000 mm/min, stepless - Y axis feed speed range 0-5000 mm/min, stepless - Z axis feed speed range 0-3150 mm/min, stepless - B axis feed speed range 0-4000 mm/min, for Ø1m, steplessly Bg2Ltmk8Gq - machine weight 30 t

HBM H80

Inv. Num. : 7631 Type: F80 Produzent: Pfeifer Erzeugt: 1976 Parametern: Maximale Drehzahl der Spindel: 1000 1/min Verfahrwege X-Achse: 1700 mm Verfahrwege Y-Achse: 1800 mm Verfahrwege Z-Achse: 1800 mm Verfahrwege W-Achse: 710 mm Spindeldurchmesser: 80 mm

Horizontal Boring Machine CORNAC C100 Travel X: 1000 mm Travel Y: 1000 mm Travel Z: 1260 mm ixed table Cone SA 50 Spindle: Ø 100 mm Spindle exit: 550 mm Rotation: from 10 to 1250 RPM Table size: 1550 x 980 mm Surfacing plate: Ø 520 mm Spindle motor: 9,5 kW Scale 3 axes HEIDENHAIN Automatic Feeds: X - Y - Z Supplied with a set of cones Voltage: 380 V Dimensions (L x W x H): 4500 x 2100 x 2450 mm Weight: approx 8 T

OM Vertical Turnmill TMD-30/40 with 2 x crossrail mounted Vertical rams + C-Axis + Milling spindle New 1990 / Retrofit in 2020 from Fanuc 15T to Siemens 840D Control Siemens 840 D Table diameter 3000 mm Turning diameter 4000 mm Turning height 3000 mm Table load max. 40 ton Distance between table & crossrail max. 3400 mm Ram horizontal travel (X) 2200 mm Ram vertical travel (Z) 2000 mm (right ram),1600 mm (left ram) Crossrail travel 2400 mm Table speed 0.4 ~ 60 rpm Table motor 55 KW Max. torque 10,000 kgM Table index C-Axis 0.001degree Milling spindle speed 3~750 rpm Spindle taper ISO 50 Milling spindle power 18.5 KW Milling feed 1~180 deg/min. Ram section 260 x 260 mm ( right ram ), 250 x 250 mm ( left ram ) Tool shank size 50 x 50 mm Machine dimension (L,W) 14,700 x 10,500 mm Condition said to be very good (please see attached photos).  ...

Key data: 80 mm, 1700 mm, 1800 mm

Spindle Diameter: 80 mm Spindle Adapter: SK50 Spindle speeds: 11 - 1000 rpm. X-axis: 1700 mm Y-axis: 1800 mm Z-axis: 1800 mm Spindle off (W-axis): 710 mm Table dimensions: 1100 x 900 mm Elbo Digital Readout: On Y-axis and Z-axis Equipped with: -Turntable - Some tool containers Spindle motor: 7.5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine Weight: 10 Ton

Key data: 40 mm, 945 mm, 710 mm

MAS radial boring mill, type VR4A Ready to use. flawless operation Technically tested with retrofitted emergency stop switch Specifications: Drilling spindle mount: Mk4 Max drilling capacity 50/60 mm Feed in longitudinal direction drill head (X-axis): 945 mm Height adjustment arm (Y-axis): 710 mm Min spacing stand -- drilling spindle (X): 310 mm Max spacing stand -- Drilling spindle (X): 1255 mm Spindle diameter: 40 mm Max drilling depth: 310 mm Speeds: 40 > 2000 rpm Power on main drive shaft: 3 kW Height: 2240 mm Weight: 2.55t ACCESSORIES: Table/Cube The machine can be viewed at any time. On-site loading can be easily carried out with a forklift. Transport possible throughout Germany via freight forwarder.

HBM WI 130 CNC Heidenhain iTNC 530, new 1969, after repairs 2008, spindle taper M 80/HSK 80

HBM W 160 H, CNC Heidenhain iTNC 530, new 1982, after repairs 2009, spindle taper Morse 100, are reductions from M 100/HSK80

TOS W100 Horizontal Boring Mill DRO Spindle 100 mm Spindle speeds 7.1-1120 rpm X/Y/Z/W Axis- 1600/1120/1250/900 mm Table size 1250x1250 mm Max table load 3 ton Table type rotary Facing chuck diameter 600 mm Slide travel 210 mm Max facing diameter 900 mm Facing chuck speed range 7.1 - 224 rpm Total power 15 kW Dimension 6020x3000x3500 Weight 14000 kg Remarks: faceplate is available, under a fixture

Table capacity 80 TONS Clamping plate width mm 3550 length mm 4000 Carriage travel V mm 2000 Heidenhain scale Rotary axe B ROD 700 Table height mm 1460 Table weight kg 52000

W160HC with ISO 50 y.m. 1987 xtravel 4000mm y travel 3150mm rotary table S35C load 35tons, 3150 x 2800mm milling heads, tools

Key data: 130 , 3500 , 2000

CNC SIEMENS 840D X-axis (longitudinal) 3500 mm Y-axis (transverse) 2000 mm Z-axis (vertical) 1250 mm Table length 1800 mm Table width 1800 mm Maximum workpiece weight 12000 kg Spindle diameter 130 mm Maximum spindle speed 800 rpm Magazzino utensili 52 posti Spindle motor 37 kW Year of revision 2005 ------------------- Length x width x height 7200 × 7800 × 4900mm Weight 32000 kg

Key data: 130 mm, 4000 mm, 2500 mm

TOSHIBA BP-130R22 Year 2007 SPINDLE DIAMETER 5.12" (130mm) TAPER IN SPINDLE #50 VERTICAL TRAVEL, Y-AXIS 100" (2500mm) CROSS TRAVEL, X-AXIS 160" (4000mm) SPINDLE TRAVEL, Z-AXIS 28" COLUMN TRAVEL, W-AXIS 60" TABLE SIZE (BUILT IN B-AXIS) 86.6" X 70.8" TABLE LOAD CAPACITY 44,000 LBS TABLE INDEXING B-AXIS 0.001 DEGREE SPINDLE SPEEDS (3-RANGES) 5-2500 RPM EQUIPPED WITH: TOSNUC 888 CNC CONTROL 60-STATION AUTOMATIC TOOL CHANGER THROUGH SPINDLE COOLANT CHIP & SPLASH ENCLOSURE CHIP CONVEYOR 40/30 HP SPINDLE MOTOR NOTES: INSPECT IN PLANT UNDER POWER

Specifications: X-axis 2,750 mm Y-axis 2,500 mm Z-axis 2,320 mm W-axis 700 mm Spindle power 50 kW Spindle diameter 130 mm Spindle speed 1.6 – 1,600 rpm. Tool holder SK 50 Control: CNC HEIDENHAIN TNC426 Table dimensions 2,000 x 1,800 mm max. table load 8 tons B-axis 360 A° Weight approx. 37,000 kg

Scharmann boring mill Ecocut 1.1 TDV 3 / Retrofit in 2015, Year of construction 1983 / Retrofit 2015 by Scharmann Control Siemens 840 D, Travel X/Y/Z/W 2000/1450/1400/600 mm, Table clamping surface 120 x 1600 mm, Enclosure open at the top installed in 2015, Feeds up to 6 m/min, spindle speed up to 3,000 rpm - 30 KW, Machine does not need a foundation ! due to the self-designed polymer bed, max workpiece weight 12,000 kg, Machine weight 24,350 kg, complete documentation, Additional equipment: A CNC-controlled face plate is integrated in the drill quill. With this device, contours up to Ø600 can be rotated Services provided during retrofitting The machine was electrically and mechanically overhauled by Scharmann, most recently in 2015. During the overhaul, the entire electrical system was replaced and the control system was ...

UNUSED: Facinghead of a Wotan BF 160 Horizontal borer.

Code 71144 Description Horizontal table borer Make PFEIFER Model F 80 / 100 Serial number 2342 Year 1982 Spindle 100 mm Spindle taper 50 ISO Spindle out (W) 500 mm Table 1000 x 850 mm Cross (X) 1200 mm Longitudinal (Z) 800 mm Vertical (Y) 800 mm Distance table-spindle 0 x 800 mm Speeds 18 steps Spindle speeds 14 – 1500 rpm 16 Feeds 0,03 – 6,0 mm/rev Rapids 2500 mm/rev Rapids all directions ( X-Y-Z-W-B) Motor 7,5 kW 380 Volts Accessoiries X-Y-Z axis are BALLSCREWS Tool clamping Pendant control Condition Machine is in very good condition

Code 61080 Description Horizontal table borer Make UNION Model BFT 90/3 at Serial number 25 742 Year 1979 ( 1980 in use ) Control Heidenhain TNC 121 Spindle 102 mm Spindle taper ISO 50 Spindle out (W) 710 mm Table 1400 x 1250 mm Cross (X) 1000 mm Longitudinal (Z) 1600 mm Vertical (Y) 1000 mm Distance table-spindle 0 – 1000 mm Weight on table 3000 kg 24 Spindlespeeds 8 - 1600 rpm Feeds 1 - 3000 mm/min Rapids 3 m/min. Motor 11 kW 380 Volts Accessoiries 3 x DRO Heidenhain ( X-Y-Z ) Tool clamping Guideway protection Pendel control Cooling equipment Option ( extra price ) Universal millinghead with 600 mm gap

Inv. Num. : 5479 Type: PC W 200 HA Producer: ŠKODA Created: 1987 Parameters: Spindle drive power: 77 kW Minimum spindle speed: 0.8 1/min Maximum spindle speed: 630 1/min Mechanical feed length axis X: 4000 mm Maximum feed speed axis X: 4000 mm/min Maximum feed speed axis Y: 4000 mm/min Maximum feed speed axis Z: 4000 mm/min Cone: ISO 60 Spindle diameter: 200 mm Maximum turning-out depth: 2000 mm Spindle extension: 1600 mm Base size: 6400 x 5100 mm Ride of the stand on the bed: 5000 mm

Code 71145 Description Horizontal table borer Make UNION Model BFT 80 / 3-1 Serial number 18301 / 34 Year 1986 Spindle 80 mm Spindle taper ISO 40 Spindle out (W) 710 mm Table 1120 x 1000 mm Cross (X) 1000 mm Longitudinal (Z) 1600 mm Vertical (Y) 1000 mm Distance table-spindle 0 – 1000 mm 24 Spindlespeeds 8 - 1600 rpm Feeds 1 - 2500 mm/min Rapids 3 m/min. Motor 11 kW 380 Volts Size L x W x H 5500 x 3200 x 2800 mm Weigth 9 ton Accessoiries Facing head Ø 460 mm with 180 mm stroke 3 x DRO Heidenhain ( X-Y-Z ) Tool clamping Guideway protection Pendel control Cooling equipment Option ( extra price ) Universal millinghead Condition Machine is in good condition

Horizontal borer Wotan B105Y Spindle: 120 mm Travels: -X: 3000 mm -Y: 1450 mm -Z: 1280 mm Table: -1400 x 3000 mm -Rotating part: 1130 x 1500 mm (manually rotated to any degrees) -Max load: 7 tn Machine weight: about 25 ton

W100A Parameters 100mm, 1600mm Diameter of working spindle 100 mm Taper in spindle morse 6. Longitudinal adjustment of table (z) 1450 mm Cross adjustment of table (x) 1600 mm Motion of work head on frame (y) 1120 mm Slip out of working spindle (w) 900 mm Clamping area of table 1250 x 1250 mm Dimensions l x w x h 6710 x 3450 x 3000 mm Machine weight 14 000 kg Accessories: face plate, tail stock

W 200G with Siemens AC main motor. modernized the main drive by instalation of Siemens AC motor with SIMODRIVE 611. Original built ISO 60 taper and 630 rpm Main data: X=8000 mm Y=4150 mm Z =1600 mm W=2000 mm Spindle dia 200mm ISO 60 spindle speed max 800 rpm Accessories: DRO Philips available as original rotary table E 20 4 floor plates 5600x1880x400mm milling head IFH 1 and IFW 3 counter steady SKODA IOT 4150

Skoda W 160 H/NR CNC Travel x= 14.500mm (bed is for the travel 18,500mm) Travel Y= 3.150mm Travel Z= 1.600mm Travel W= 1.250mm Spindle diameter 160mm Machine with ball screw Many accessories available: CNC control Siemens SINUMERIC 850 Rotary table ISO 16 2.200 x 2.200mm, capacity 16 ton included Chip conweyor : 19.000 mm + 12.000 mm Floor plates

Technical data Spindle dia 125mm ISA 50 taper stroke of the spindle 800 mm cross travel of table X 1200 mm vert. travel of headstock Y 1400 mm longit. ztravel of the table Z 1620 mm spindle speed infinitely variable 3,5-700 rpm table size 1200 x 1400 mm table load 6000 kg main motor DC 19 kw total input 22,79 kW spindle feed inf. variable 0 - 1,25 mm/rot working feeds inf. variable 0,3 - 1700 mm/min rapid traverse 2250 mm/min fine feed 3mm/min dimension LxWxH 7,4 x 4,8 x 3,6 m weight of the machine 21000 kg DRO Heidenhain

TOS WHN 130 MC used machine Specifications System Heidenhain TNC 426 Working range Spindle diameter 140 [mm] Taper in the spindle ISO 50 Table transverse adjustment (X) 3000 [mm] Vertical headstock adjustment (Y) 2000 [mm] Vertical travel (Z) 1250 [mm] Spindle stroke (W) 560 [mm] 2X Clamping surface 1800 x 1600 [mm] Speed range 10 - 2500 [rpm] Main motor output 37,0 [kW] Max. workpiece weightƒ 8000 [kg] Accessories Tool changer for 60pcs Tool cooling Chip conveyor