boring mills and machining centers used for sale

Max. drilling diameter ... 50mm Spindle holder ... Morse code 5. Max. plunger adjustment ... 875mm Max. distance of the spindle axis from the stand ... 1250mm Main engine power... 4kW Total power requirement ... 6kVA L x W x H ... 2750x1120x3271mm Machine weight ... 4550kg The machine is in good condition, possible to test under power.

Year of manufacture: 1992 / G: 2025 Spindle diameter ... 100mm Axis X ... 1500mm Axis Y ... 1250mm Spindle speed ... 7-1120 rpm Axis W Axis Z ... 1800mm ISO 50 Turntable diameter ... 1200x1200mm The machine is in good condition, possible to test under power.

Control Heidenhain ... TNC 530 Clamping table surface ... 600x1000mm Axis X ... 630mm Axis Y ... 560mm Axis Z ... 560mm Spindle speed ... 0-12000 rpm controlled axes ... 5 IKZ HSK 63 Table diameter ... 600mm Magazine spaces ... 24 Main engine power ... 15/10kW Max. workpiece weight ... 500kg The machine is in good condition, possible to test under power.

CNC Vertical Machining Center HERMLE C 42 U With track control Heidenhain TNC 640 Year of manufacture: 2018 Travel : X 800 Y 800 Z 550 Speed range : 20 – 18,000 rpm continuously variable ( HSK 63) With the following accessories: NC swivel rotary table 800 mm x 630 mm clamping surface Vertical tool changer with 42 magazine positions (HSK 63) Additional Magazine ZM 43 Linear axes standard version Remote maintenance module Internal coolant supply ( IKZ 80 bar) Scraper belt conveyor Coolant Setup Blow-off device Blowing air through the spindle center Swarf Spray Gun Oil mist extraction Manual Cab Door , Manual Cab Roof Laminated glass safety pane Electr. Handwheel Electr. iTNC Heat Compensation 3 D Probe Heidenhain BLUM Wz-bruch/ Measurement 4 Pieces Height Adjustable Machine Shoes Operating instructions

GeneralTwo-spindle turning centre with - 2 cross slides - 2 turrets with 12 positions each (all driven) - main spindle and counter-spindle - 2 C-axis - 2 tool drives - Y-axis on slide 1 - chip conveyor - workpiece-unloading; Control: Fanuc 31i Working areaBar diameter max.50 mmTransport beltTransport belt for finished workpieces outside the machineDMG MORI NETSERVICEDMG MORI NETSERVICE Qualified support by Internet-based remote diagnosticsIoT connectorDMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)Special equipmentAdditional bar capacity for main spindle from Ø 50 mm to Ø 65 mm (max. 5.500 RPM) Additional charge for cooling on turret (upgrade to) 50 bar instead of 25 bar

Machining Center Huron VX8 Article number: 07-07-182 Manufacturer: Huron Very good general condition Delivery time: immediately available Machine Workshop Tested, Under Power Spindle hours: 6100 Year of Make: 2015 L x W x H: approx. 2460x3960x2900mm Weight: approx. 5500kg Control: Heidenhain TNC 620 Travel X: approx. 820mm Travel Y: approx. 510mm Travel Z: approx. 510mm Rapid traverse: approx. 24m/min Usable surface: approx. 1000x530mm Permissible table load: approx. 500kg Tool changer: 24 places Spindle speed: 15,000 rpm Tool holder: ISO 40 Accessories: Blum Probe Pack TC 54+52 Various tool holders incl. Cutters Coolant Setup Chip Conveyor + Chip Trolley Transport securing Vice Machine documentation Accessories ( see picture ) Other accessories on request Price and other technical data on request

Control Heidenhain ... TNC 530 Clamping table surface... 600mm Axis X ... 800mm Axis Y ... 700mm Axis Z ... 610mm Spindle speed ... 20-15000 rpm controlled axes ... 5 cooling ... 20bar ISO 40 Max. workpiece weight ... 300kg Main engine power ... 25kW Rapid traverse ... 32,32,16m/min Number of positions in the tool changer... 30 Machine weight ... 8750kg L x W x H ... 3710x2530x3230mm

Column drill Gillardon GB 40 VE Article number: 02-04-040 Manufacturer: Gillardon Very good general condition Machine workshop tested Delivery time: Immediate prior sale reserved Year of construction: ca.1985 L x W x H: approx. 630x985x2020mm Weight: approx. 620kg Drilling capacity (steel): approx. 40mm Drilling capacity (casting): approx. 50mm Tapping capacity: M27-M33 Tool holder: MK4 Speed range, infinitely variable: 60-1600 rpm Table clamping surface: approx. 640x530mm Feed range: approx. 0.1; 0,16; 0.25 mm/rev Accessories: Tapping device Coolant Setup Work light Expulsion wedge Chuck Documentation Various tension wrenches Other accessories on request Price and other technical data on request

MILLING ROD - Tool type : ISO40 - Spindle power: 14 [kW] - Spindle speed: 14.000 [rpm] LINEAR AXES - X/Y/Z axis travels: 750 / 600 / 520 [mm] ROTARY AXIS A - Travel : 360 [°] (+/-) - Indexing accuracy: 0.001 [°] ROTARY AXIS B - Stroke: -10 / +95 [°] - Indexing accuracy: 0.001 [°] TOOL CHANGER - Tool changer type : Loader arm - Tool magazine capacity: 30 TABLE - Table dimensions : Ø700 X 500 [mm] - Table weight capacity : 350 [kg] CN DMG MORI Ergoline / HEIDENHAIN Loading only on 22/11/20243900x3200x2850 mm5800 kguncheckedex foundation, unpackaged

Serial number 21064, 3-axis machine with rigid clamping table approx. 600 x 630 mm, traverse paths X/Y/Z 450/600/330 mm, spindle speed max. 30000 rpm, tool magazine with 65 tool positions for HSK-A 50 tool holders, HEIDENHAIN iTNC 530 control, chip conveyor5000 x 2400 x 3500 mm11500 kguncheckedloaded on truck

Key data: 63 1/min, 25 mm, 200 mm

Manufacturer: WMW Type: BKR 25 x 4 AI Stock number: 1023 Number of Spindles: 4 Spindle spacing: 475 mm Table working surface: 450 mm x 1900 mm Drilling capacity in steel: 25 mm Morse taper of spindle: MK 4 Connected load: 10.2 kW Weight: 3000 kg

Key data: 63 1/min, 32 mm, 200 mm

Manufacturer: WMW Type: BKR 32 x 4 AI Stock number: 1022 Number of Spindles: 4 Spindle spacing: 475 mm Table working surface: 450 mm x 1900 mm Drilling capacity in steel: 32 mm Greatest distance between table and spindle: 710 mm Table surface: Morse taper of spindle: MK 4 Drilling spindle stroke: 200 mm Connected load: 12.4 kW Weight: 3080 kg

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 193000 €: 3802.1 €: 6080 mm: 13 mm: 10 mm: 350 mm: 10 1/min: 0,5 - 2.5 °: 29 : 58 to: 1000 mm: 200 mm/s: 37 kW: 400 l: 6 Stk.: 950 mm: 650 mm: 6375 mm: 7400 mm: 2200 mm: 3700 mm: 2900 mm: 33820 kglinear guidedCNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantityUSB portcutting line illuminationfoldable ball screws for back gaugeballs in tablefoldable finger protection, 1.000 mmside lay with T-slot, tilting cam and scale6 support arms wit T-slotsoilfillinglight barrier on the back of the machineuser manual in GERMAN and ENGLISHPRICE FCA TURKEY(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 62400 €: 1254.24 €: 4100 mm: 6 mm: 4 mm: 50 mm: 12 1/min: 1.5 °: 20 : 17 to: 1000 mm: 200 mm/s: 15 kW: 200 l: 3 Stk.: 865 mm: 580 mm: 4510 mm: 5230 mm: 2300 mm: 3600 mm: 2150 mm: 11460 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade f ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 145000 €: 2885.5 €: 6080 mm: 6 mm: 4 mm: 350 mm: 10 1/min: 0,5 - 2 °: 29 : 20 to: 1000 mm: 200 mm/s: 22 kW: 200 l: 5 Stk.: 900 mm: 630 mm: 6370 mm: 7300 mm: 2150 mm: 3400 mm: 2750 mm: 25500 kglinear guidedCNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantityUSB portCNC controlled cutting gap adjustment by the table (patented)oil coolermanual central lubricationcutting line illuminationfoldable ball screws for back gaugeballs in tablefoldable finger protection, 1.000 mmside lay with T-slot, tilting cam and scale5 support arms wit T-slotsoilfillinglight barrier on the back of the machineuser manual in GERMAN and ENGLISHPRICE FCA TURKEY(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 51600 €: 1037.16 €: 3080 mm: 6 mm: 4 mm: 350 mm: 20 1/min: 0,5 - 2 °: 16 : 20 to: 1000 mm: 200 mm/s: 11 kW: 125 l: 3 Stk.: 820 mm: 494 mm: 3280 mm: 4100 mm: 2050 mm: 3650 mm: 1950 mm: 7980 kglinear guidedCNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantityUSB portcutting line illuminationfoldable ball screws for back gaugeballs in tablefoldable finger protection, 1.000 mmside lay with T-slot, tilting cam and scale3 support arms wit T-slotsoilfillinglight barrier on the back of the machineuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 92100 €: 1851.21 €: 3100 mm: 16 mm: 10 mm: 350 mm: 10 1/min: 2 °: 14 : 61 to: 1000 mm: 200 mm/s: 37 kW: 410 l: 2 Stk.: 818 mm: 550 mm: 3580 mm: 4550 mm: 2250 mm: 3825 mm: 2250 mm: 15000 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade  ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 59600 €: 1197.96 €: 3100 mm: 10 mm: 6 mm: 50 mm: 13 1/min: 1.5 °: 16 : 22 to: 1000 mm: 200 mm/s: 22 kW: 200 l: 2 Stk.: 865 mm: 580 mm: 3515 mm: 4200 mm: 2250 mm: 3600 mm: 2100 mm: 9300 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade f ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 68700 €: 1380.87 €: 3100 mm: 13 mm: 8 mm: 50 mm: 13 1/min: 1.75 °: 16 : 37 to: 1000 mm: 200 mm/s: 30 kW: 330 l: 2 Stk.: 840 mm: 600 mm: 3550 mm: 4280 mm: 2300 mm: 3600 mm: 2350 mm: 12500 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 94900 €: 1907.49 €: 4100 mm: 13 mm: 8 mm: 350 mm: 8 1/min: 1.75 °: 18 : 62 to: 1000 mm: 200 mm/s: 30 kW: 330 l: 3 Stk.: 818 mm: 550 mm: 4520 mm: 5350 mm: 2250 mm: 3650 mm: 2250 mm: 16300 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade ...

x-travel: 510 mmy-travel: 510 mmz-travel: 460 mmcontrol: Mazatrol 640 total power requirement: kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmcontrol: Heidenhain TNC430M total power requirement: kWweight of the machine ca.: 6700 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmcontrol: DMG total power requirement: kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1300 mmy-travel: 650 mmz-travel: 625 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: 9000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mmy-travel: 560 mmz-travel: 510 mmb-axis: -125/ +10 °c-axis: 360.000 x 0,001 °control: Fanuc G-Tech 31i table surface area: Ø 500 mmturning speed range: 12000 U/minmax. torque on the spindle: 167 Nmpower capacity - milling spindle: 11/ 7,5 kWinternal coolant system feed: 70 barrapid traverse: 40 m/minno. of tools in the magazine: 90 Stücktool taper: HSK 63 A |dimensions: 2,3 x 3,65 x 3,0 mweight: 10,5 tfull 5-axis machining Center. First instalation in 2018Equipment:- NC rotating and swiveling table- full covered- spindle cooling- chip conveyor- filtersystem Knoll and internal coolant- absolut scale - coolant gun- 3D probe Renishaw OMP 60 incl.Easy Probe software- Memory expansion to 8 MB- Matsuura Pivot Check- control for cutting power- Expansion of Macro Variables from 100 to 600- 5- axis package (Al Nano Control, G54.2, TCPC)The data for this ad was created with Mod ...

bore capacity in steel (diameter): 40 mmthroat: 360 mmbore stroke: 240 mmtotal power requirement: 2,5 kWweight of the machine ca.: 1100 kgdimensions of the machine ca.: 1100 x 800 x 2300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8348 Type: DMC 635V eco Producer: DMG Created: 2008 Parameters: Control system: SIEMENS 810D Work table length: 790 mm Work table width: 560 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 635 mm Y-axis travel: 510 mm Travel travel Z-axis: 460 mm

Inv. Num. : 8347 Type: DMC 635V eco Producer: DMG Created: 2013 Parameters: Work table length: 790 mm Work table width: 560 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 635 mm Y-axis travel: 510 mm Travel travel Z-axis: 460 mm Machine weight: 3900 kg

Key data: 500 mm, 250 mm

Precision coordinate boring and milling machine, top condition Fehlmann, Picomax 55 CNC Control : Heidenhain TNC 407 (415) Process: 500 x 250, Z: 145 (+160 man.) W- 500mm, Table: 885x320mm, ATC 27 pos Spindle: 50 - 10000 rpm, 7kw

Key data: 600 mm, 700 mm, 600 mm

Specifications: Manufacturer: Deckel Maho Type: DMU 60P Machining Center 5-Axis Year of Make: 1999 Control: Heidenhain MillPlus Travels: X 600 mm Y 700 mm Z 600 mm Switch-on hours: 34,820 h Working hours: 12,587 h Working spindle Speed: 18,000 rpm Tool holder: SK40 Tool Changer Number of stations: 60x Workbench Table load: 600 kg Table diameter: 630 mm Swivel table A-axis: +/- 45/30° C-axis: 360° Dimensions and weight Dimensions: 3,900 mm x 2,720 mm x 2,630 mm (+ accessories) Weight: 8100 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Internal mould cooling 40 bar with high-pressure system Conveyor The working spindle was recently renewed; all receipts are available.