Drilling capacity 13 mm Tool holder: MK 2 4 different motor speeds
: 12 mm: M 10 : B 16 : 250 - 5000 U/min.spindle stroke: 40 mmthroat: 200 mmcolumn diameter: 50 mm: 2 x 12 x 80 mm: 300x240 mm: 2 x 12 x 80 mm: 110 / 250 mmfeed: von Hand : Handrad Machine height: 670 mmtotal power requirement: 0,7 kWweight: 64 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 14 mm: M 10 : MK 2 : 230-4.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 83 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 14 mm: M 10 : MK 2 : 230-4.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 83 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 14 mm: M 10 : MK 2 : 230-4.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 93 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 16 mm: M 12 : MK 2 : 100-2.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 83 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 16 mm: M 12 : MK 2 : 100-2.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 83 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 23 mmthreading in St 60: M14 threading in GG 20: M16 : MK 2 spindle stroke: 100 mm: 125-2400 U/min.throat: 250 mmcolumn diameter: 90 mm: 370x300 mm: 2x14x160 mmdistance spindle /table: min./max. 125/455 mm: Handkurbel : 320x250 mm: 2x14x160 mm: 625/625 mmfeed: von Hand height of the machine: 1095 mmweight of the machine ca.: 160 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Spindle taper Fixed chuck Table size 470 x 510 mm Spindle speeds 250 - 2.000 rpm Spindle travel 120 mm Equipped with: Collet chuck Thread cutting Coolant Service tools etc.
bore capacity in steel (diameter): 32 mmthroat: 265 mmbore stroke: 160 mmturning speeds: 280 - 1975 U/min: 390 x 400 mmdistance drilling head - clamping area: 745 mmtotal power requirement: 1,1 / 400 kW / Voltweight of the machine ca.: 0,230 tdimensions: 0,9 x 0,5 x 1,4 mTable Drilling Machine with:variable feedTapping function.depth displayCoolant systemBelt-drivespindle protectionmachine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 16 mmthroat: 150 mmbore stroke: 90 mmturning speeds: 340 - 2200 U/min: 243 x 243 mmtotal power requirement: 0,5 kW / Voltweight of the machine ca.: 42 Kgdimensions: 400 x 450 x 900 mmTable drill- Digital speed display- Spindle protection- vice- drill replacement- Quick span feed (1 to 16 mm)- Tilt and rotating rider work table.- deep stop- tool set- documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 18 mmthroat: 225 mmbore stroke: 110 mmtable-size: 430x345 mmspindle turning speed - stepless: 135-4500 U/minweight of the machine ca.: 0.7 tDigital read-outTapping attachmentCross table 530x255mmMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool taper: MK 2 digital: . weight: 100 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Standard equipment: robust, high-quality and inclined rotary hood for easy reading of the speed LED lighting quickly adjustable and ergonomic drilling depth stop infinitely variable speed control Connection cable with SCHUCO plug (1.2 m) Undervoltage outlets Drilling protection with electr. Hedge thermal overload protection Emergency Stop Impact Button Weight in kg: 44 Motor kW: 0,45 AC 230 V Speed 1/min: 250-3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminium Ø 20 mm - Softwood Ø 40 mm - Drilling depth 60 mm - Projection 220 mm - Saeulen diameter 70 mm - usable table area (W x L) 300 x 250 mm - T-groove size number 2, distance 100 mm Dimensions width 14/26 mm - Spindle B 16 - Speed display digital - Drilling depth display: scale - Drill depth stop: quickly adjustable stop ring - Feed: by hand - FACTORY WARRANTY: 3 years - free domicile incl. packa ...
- Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with Schuko plug SPECIFICATIONS - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column Ø: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: Digital - Drilling depth display: Digital - Feed (mm/revolution): by hand - Spindle speeds infinitely variable: 60 – 6,000 1/min - Continuous/normal drilling capacity: 10/12 mm - Thread cutting performance (depending on slope): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION Drilling package (No. 296570) Machine vice Flott [felix] 80 and quick-release drill c ...
bore capacity in steel (diameter): 13.0 / 16.0 mmthroat: 185 mmbore stroke: 70.0 mmspindle taper: B 16 table:: 220 x 230 mmturning speeds: 500 - 3200 U/mincolumn diameter: 75.0 mmtotal power requirement: 0.45 kWweight: 95.0 kgrange L-W-H: 425 x 250 x 920 mm from a vocational training center ()Furnishing:- manual spindle feed- Digital drilling depth display at the front including zero setting- Work table with 2x T-slots height adjustable- machined base plate with 2x T-slots- Taper mandrel including keyless drill chuck- V-belt drive- ON/OFF switch, front- EMERGENCY stop button, front- Connection cable + 16A plug Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9093644The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Spindle speed infinitely variable electronic 40-4000 1/min Spindle: MK 2 Table height adjustment with rack Thread cutting performance max M12 Setting the thread cutting depth via digital depth display digital speed display digital drilling depth display Drilling depth stop via stop ring Feed / by hand Table height adjustment with rack Continuous/normal drilling capacity steel Ø 15 mm / 18 mm Drilling depth 70 mm Projection 220 mm Mouth diameter 70 mm Usable table area (W x L) 300x250 mm Machine dimensions (W x D x H) 420x520x850 mm Weight 65 kg max distance spindle/table/foot 300/ 370/ 420 mm Motor AC with frequency converter 230 V , 0.54 kW OPTION Drilling package B16 (No. 296570) - Vice felix 80 - Quick-release drill chuck 1-13 mm Price: € 539,- Factory warranty: 3 years Free domicile including packaging (Germany only) Delivery time: immediately from ...
bore capacity in steel (diameter): 6.0 / 10.0 mmthroat: 200 mmbore stroke: 60.0 mmspindle taper: B 12 table:: 280 x 260 mmturning speeds: 430 - 9000 U/mincolumn diameter: 70,0 mmtotal power requirement: 0.45 / 0.60 kWweight: 95.0 kgrange L-W-H: 450 x 300 x 880 mm from a vocational training center ()Furnishing:- manual spindle feed- Analogue drilling depth display with mm scale- pole-changing motor- Work table with 2x T-slots height adjustable- machined base plate with 2x T-slots- Taper mandrel including keyless drill chuck- V-belt drive- ON/OFF switch, front- Connection cable + 16A plug- original instruction manual Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9093645The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Tool holder: B 16 ; 1 - 13 Drilling capacity: 13 mm Speed range: 400 - 2300 1/min Spindle stroke: 80 mm Size base plate: 240 x 215 mm Distance chuck / base plate: 130 - 280 mm Projection: 200 mm Column diameter: 70 mm Motor power: 0.3 kW Connection: 400 V Weight, approx.: 60 kg Dimensions (WxDxH), approx.: 270 x 700 x 600 mm Equipment: - Machined foot with T-slots - Infinitely variable speed adjustment - Drilling depth stop -Chuck - Analogue speed display - Height adjustable by crank
Specifications: Tool holder: B 6 ; 1 - 13 Drilling capacity: 13 mm Speed range: 400 - 2300 1/min Spindle stroke: 75 mm Size base plate: 240 x 215 mm Table size: 200 x 235 mm Projection: 200 mm Column diameter: 70 mm Motor power: 0.3 kW Connection: 400 V Weight, approx.: 70 kg Dimensions (WxDxH), approx.: 260 x 600 x 700 mm Equipment: - Machined foot with T-slots - Infinitely variable speed adjustment - Drilling depth stop -Chuck - Analogue speed display - Height-adjustable table
Offer 23010 Specifications: - Drilling capacity 20 mm - Drilling spindle mount MK 2 - Drilling spindle stroke 140 mm - Drilling spindle speeds infinitely variable 150 - 3000 rpm - Projection 285 mm - Column diameter 105 mm - min. / max. distance drilling spindle / table 245 / 675 mm -Lighting - Quick-action chuck - Coolant device - Machine vice - Machine undercarriage - Drive 400 V / 0.5 / 0.9 kW - Dimensions W 600 x H 1900 x D 900 mm - Weight approx. 200 kg
16 speeds 90 – 1980 rpm Drive power 0.7 / 1.3 kW Tool holder MK 3 Drilling capacity in ST60 28 mm Column diameter 105 mm Projection 260 mm Spindle stroke 150 mm T-slot plate to spindle nose approx. : Minimum – Maximum 240 - 620 mm Table height above floor 830 mm Machine height max. approx. 2 m Weight of drill head approx. 0.15 to Equipment / Scope of delivery : T-slot plate, W x D = 800 x 700 mm, T = 50 mm
Robust strong bench drilling machine Manufacturer: HILLE works type: BN 10 No. 2/23654 suitable for floating drilling, at the time a speed via pulley Engine power: 2,2 KW 380 volt 50 Hz 1440 RPM Engine type: Baucknecht R 2.2/4-71 Column diameter: 110 mm boring Quill: 60 mm Stroke: 100 mm Throat depth: 200 mm Max Entfern.Tisch Chuck: approx. 320 mm Dimensions: approx. 500 x 830 x 850 mm Equipment: Keyless chuck right off: 0-10 mm
bore capacity in steel (diameter): 25,0 / 30,0 mmthroat: 150 mmbore stroke: 120 mmthreading: M18 / M22 spindle taper: 3 MKtable:: 300 x 270 mmturning speeds: 200 - 4.000 U/mincolumn diameter: 100 mmtotal power requirement: 0,75 / 1,1 kWweight: 170 kgrange L-W-H: 800 x 500 x 1400 mm from a training workshop () New price approx. 4.700 eurosFurnishing:- robust bench drill with V-belt drive- Clamp / relax using a quick release lever- stepless speed adjustment- digital speed display- EMERGENCY OFF push button at the front- stable feed handle- stable quill for tool mounting- Thread cutting device- Right / left running of the work spindle- Pole changing motor- manual spindle feed- Height-adjustable work table, using a hand crank- adjustable drilling depth stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 300 mmbore stroke: 170 mmturning speeds: 70 - 1400 U/min: 600 x 450 mmtotal power requirement: 3,0 KWtool taper: MK 4 feed: 0,1 - 0,2 - 0,3 mm/Uweight of the machine ca.: 320 Kgdimensions: 0,8 x 1,2 x 2,15 mmColumn drill- Feed- Left/right rotation- Coolant pump- Vario speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bench drill Manafacture: IXION Type BST - 25438/61 Projection approx. 180 mm Quill stroke approx. 65 mm Year of manufacture: unknown Power: 0.25 kW Chuck 0-10 mm total height approx. 80 cm Weight approx. 55 kg Item location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under power. We will be happy to send you more photos by e-mail. A forklift/crane for loading is available. We reserve the right to make an intermediate sale. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the b ...
bore capacity in steel (diameter): 23,0 / 28,0 mmthroat: 260 mmbore stroke: 120 mmspindle taper: 3 MKtable:: 415 x 390 mmT-slots: 2x B 22,0 mmtable height: 880 mmturning speeds: 160 - 2800 U/mincolumn diameter: 110 mmtotal power requirement: 0,7 / 1,3 kWweight: 275 kgrange L-W-H: 900 x 1100 x 1900 mm Machine from a vocational school very good condition ()TABLE DRILLING MACHINE / DRILLING HEAD HEIGHT ADJUSTABLE WITHCONSTANT TABLE HEIGHTFurnishing:- pole-changing motor- Continuous speed adjustment including analogue speed display- Spindle feed manually via cross handle- Drill head height adjustable, via hand crank- machined base plate with T-slots- adjustable drilling depth stop- Front main switch- Machine base including cabinet door Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9093639The data for this ad was created with ModulMWS - the software solu ...
Technical data: -Drilling capacity approx. 30 mm - spindle mount MT 3 -Spindle speeds in 2 steps continuously variable 80-1400 RPM -Table surface 390 x 420 mm -Drill unit by hand crank height adjustment -min / max distance table / spindle 220 / 580 mm -Drilling spindle stroke 150 mm -Spindle projection powered 280 mm â 400 V / 1.3 / 2.3 kW -Space requirement approx. B 480 x H 880 - H 1200 X 1050 mm -Weight approx. 250 kg -Table base with storage space B 600 x h. 910 x H 800 mm -Weight 200 kg
bore capacity in steel (diameter): 25 mmthroat: 240 mmbore stroke: 110 mmturning speeds: 125 - 2850 U/min: 310 x 320 mmdistance drilling head - clamping area: max. 650 mmtotal power requirement: 0,75 / 400 kW / Voltweight of the machine ca.: 0,175 tdimensions: 0,95x0,8x1,75 inkl. Tisch mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 260 mmbore stroke: 110 mmturning speeds: 50 - 3000 U/min: 500 x 420 mmtotal power requirement: 1,1 kW / Volttool taper: Mk4 weight of the machine ca.: 400 Kgdimensions: 0,8 x 0,6 x 1,4 mmBench drill, unused- automatic feed- Thread cutting device- Left/right rotation- Coolant system- Tool caseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 18,0 mmbore capacity in cast iron: 23,0 mmthroat: 2250 mmbore stroke: 100 mmturning speeds: 240 - 3800 U/mintable-size: 295 x 350 mmmorse taper: MK 2 total power requirement: 0,65 / 1,2 kWweight of the machine ca.: 250 kgrange L-W-H: 500 x 400 x 1830 mm Machine from a vocational school ()Furnishing :- Column drilling machine - Drive: V-belt- manual spindle feed- Pole-changing drive motor- Work table with T-slots- Height adjustable via hand crank- machined base plate with T-slots- adjustable drilling depth stop- Keyless drill chuck including taper mandrel- Machine base- Connection cable + 16A plug Machine link:https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machinen o=1008-9093641The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25,0 / 30,0 mmthroat: 260 mmbore stroke: 120 mmspindle taper: 3 MKtable:: 390 x 420 mmT-slots: 2x B 14.0 mmtable height: 900 mmturning speeds: 80 - 1400 U/mincolumn diameter: 110 mmdistance spindle /table: 220 - 600 mmtotal power requirement: 0,7 / 1,3 kWweight: 275 kgrange L-W-H: 900 x 900 x 1600 mm Machine from a maintenance workshopTABLE DRILLING MACHINE / DRILLING HEAD HEIGHT ADJUSTABLE WITHCONSTANT TABLE HEIGHTFurnishing:- pole-changing motor- Continuous speed adjustment including analogue speed display- Spindle feed manually via cross handle- Drill head height adjustable, via hand crank- machined base plate with T-slots- adjustable drilling depth stop- Front main switch- Machine base including coolant system- Operation manual Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9093640The data for this ad was create ...
bore capacity in steel (diameter): 14 /15 mmthroat: 180 mmbore stroke: 70 mmturning speeds: 420 - 2100 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 0,5/1,0 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mTable Drilling Machine with:variable feedTapping function.depth displayCoolant systemBelt-drivespindle protectionmachine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Precise, smooth-rolling standard drill, high accuracy and quality. drilling table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle In stock, available now
bore capacity in steel (diameter): 15 / 18 mmthroat: 180 mmbore stroke: 80 mmturning speeds: 200 - 4000 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 1,1 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mPrecise table drill:- high accuracy and quality- Drill table adjustable via rack and swiveling around the column- Full engine protection- Star grip- 230 volt mains connectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dauerbohrleistung in St 60: 15 mm standard ALB ear performance: 18 mm thread cutting performance: M 8 spindle: MK 2 drilling depth: 80 mm projection: 180 mm spindle speeds of stepless 200 - 4,000 rpm spindle speeds threads 200-700 rpm distance spindle/table: up to 380 mm tabletop: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full thread cutting device and programmable digital display
bore capacity in steel (diameter): 15 / 18 mmthroat: 180 mmbore stroke: 80 mmturning speeds: 200 - 4000 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 1,1 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mprecise bench drill:- Large speed range- Programmable thread cutting- high accuracy and quality- Drill table adjustable via rack and swiveling around the column- Full engine protection- Star grip- 230 volt mains connectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Tool holder: B 16 ; 0 - 13 Drilling capacity: steel 14 mm; aluminium 25 mm; wood 40 mm Speed range: 400 - 4500 1/min Spindle stroke: 60 mm Base plate size: 220 x 300 mm Distance chuck / base plate : 80 - 290 mm Projection: 205 mm Column diameter: 60 mm Motor power: 0.5 / 0.8 kW Connection: 230 V Weight, approx.: 50 kg Dimensions (WxDxH), approx.: 270 x 380 x 650 mm Equipment: - Machined foot with T-slots - Infinitely variable speed adjustment - Drilling depth stop -Chuck - Analogue speed display - Height adjustable
Specifications: Drilling capacity in steel ST 60 13 mm Quick-action chuck 1 - 13 mm Drilling spindle speeds infinitely variable 630 - 5000 rpm Drilling spindle stroke 80 mm Projection 195 mm Column diameter 65 mm Table dimensions W 240 x D 260 mm Drilling unit height-adjustable by hand crank max. distance table / base plate to spindle 280 mm Drive 400 V / 0.45 kW Space requirement approx. W 300 x H 800 x D 700 mm Weight approx. 50 kg
bore capacity in steel (diameter): 13 mmthroat: 235 mmbore stroke: 60 mmspindle taper: B 16 spindle turning speed - stepless: 100-3000 U/mintable surface area: 290x270 mmcolumn diameter: Ø 60 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Reich Table Drill - Speed: 780 - 10,000 1/min - Height: 600 mm - Width: 350 mm - Depth: 500 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.
Solid Table Drill - with infinitely variable speed - 2 stage motor - Height: 90 cm - Width: 35 cm - Depth: 50 cm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices.
UWM BENCH DRILL TYPE 20 Professioneel -MK2 -180/2740 t/m -Table 320 x 300 mm -Table is draaibaar -Noodstop -Beschermkap -Verlichting -Documentatie -230V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
Code 7418 Description 5 Spindle drilling machine Make Webo Modell B – 20 S/N Year 1975 Table 1740 x 360 mm Distance from centre of spindle to column 250 mm Spindle taper 2 MC Spindle stroke 190 mm Speeds 125 – 2000 rpm Motor 1,1 / 0,9 kW Volts 380 Volts Machine is in good condition.
bore capacity in steel (diameter): 23 mmthroat: 310 mmbore stroke: 150 mmturning speeds: 90 - 2000 U/min: 420 x 360 mmtotal power requirement: kW / Voltweight of the machine ca.: 650 Kgdimensions: 1,2 x 0,8 x 2,4 mmBench drill- Left/right rotation- Advance- Base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 20 mmthroat: 180 mmbore stroke: 82 mmturning speeds: 220 - 2840 U/min: 290 x 290 mmtotal power requirement: 0,55/0,75 kW / Voltweight of the machine ca.: 54 Kgdimensions: 820 x 500 x 290 mmCE-tested spindle hood.Keyless chuck (1 to 16 mm)Tilting work table.Depth stop.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
I am selling a well used, fully functional, bench drill from WMW model BT 2. Technical data for the machine are : Recording: MK2 Drilling stroke: approx. 100mm Max table spindle spacing: approx. 440mm Weight: 165kg. Table surface: 340mm x 280mm LxWxH: approx. 600mm x 500mm x 1300mm Incl. lighting and instruction manual. The oil has been changed. Incl. new drill chuck. The table is in good condition. Nothing is drilled. The machine can be viewed and tested under power by prior appointment. If you have any questions, just get in touch. Shipping, on pallet, is not a problem. Please inquire about shipping costs with postal code. On-site loading is possible without any problems. The sale is without guarantee and warranty. Returns are excluded. All information is subject to change.
Wörner Table Drill - Speed: 700 - 11,000 1/min - Height: 500 mm - Width: 200 mm - Depth: 400 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.
Item No. 4954: 1 gebr. Bench drill Fabr. WÖRNER, Type B4, Bauj. 1990 with drilling capacity 4/6 mm - 650-12.000 min-1 Arb.-Ber.: Table 180 x 160 mm, Other: Drilling depth 50 mm Spindle cone B 10 Weight approx. 50 kg