The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Category: sheet metal working / 3-Roller Round Bending Machines
date: 05.03.2024 add to watchlist
Machine: AKYAPAK 1030 x 70 3-Roller Round Bending Machines
item-No.: 12793065
used

Working width: 1050 mm sheet thickness: 1.5 mm top rollers Ø: 70 mm bottom rollers Ø: 70 mm weight: 320 kg space requirement: 700 x 1300 x 1100 mm

Category: sheet metal working / 3-Roller Round Bending Machines
date: 18.03.2024 add to watchlist
Machine: DAVI MCO 2024 3-Roller Round Bending Machines
item-No.: 160803802
New in: 2008
used

Max. length of plate 2000 mm Max. plate thickness 16 mm Number of rolls 3 pcs Max. pre bending capacity 13 mm Main motor power 15 HP

Category: sheet metal working / 3-Roller Round Bending Machines
date: 23.04.2024 add to watchlist
Machine: FASTI 1020-1,5
item-No.: 158912340
New in: 1970
used

plate thickness: max. 1,5 mmsheet width: max. 1.020 mmYear: ca. 1970 manual: : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / 3-Roller Round Bending Machines
date: 23.04.2024 add to watchlist
Machine: FASTI A 2
item-No.: 161523645
New in: 1967
used

sheet width: 103 mmweight: 300 kgdrive: ja : Gußhebel abgebrochen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / 3-Roller Round Bending Machines
date: 19.12.2023 add to watchlist
Machine: FESTO RSTC-U W40/7/500GL 3-Roller Round Bending Machines
item-No.: 158851179
used
Price: 4.730 €

Manufacturer: Festo Machine Type: RSTC-U W40/7/500GL Overall size: 1600 x 900 x 1800 mm Plate width: 500 mm Number of castors: 6 Voltage: 380 V

Category: sheet metal working / 3-Roller Round Bending Machines
date: 23.04.2024 add to watchlist
Machine: HESSE MSM 2030 x 1,0
item-No.: 162210374
New in: 2007
used

sheet width: 2030 mmplate thickness: 1,0 mmroll length: 2050 mmroll diameter: Ø 95,0 mmwork height max.: 950 mmengine output: 1,0 kWweight: 275 kgrange L-W-H: 2700 x 700 x 1160 mmFurnishing:- motor-driven asymmetrical 3-roller bending machine- hardened rollers- Manual folding storage for quick removal of the workpiece- Profile inlets at the end of the roller- Double foot switch for R/L run and emergency stop button- rear roller manually adjustable- manual infeed of the bottom roller- electrical safety device Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9401257The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / 3-Roller Round Bending Machines
date: 23.04.2024 add to watchlist
Machine: MG AK 206 P
item-No.: 160022955
New in: 2008
used

sheet width: 2050 mmplate thickness: 6,0 mmpre-bending: 4,0 mmdiameter of upper rolls: 160 mmdiameter of lower rolls: 140 mmtotal power requirement: 2,2 kWweight of the machine ca.: 3,0 tdimensions of the machine ca.: 3,5 x 1,5 x 1,3 m New price ~ 45.000 euros from a maintenance workshop rarely used ()Furnishing:- hydraulic 4-roller bending machine- with conical bending device Inclination of the bottom roller and the side rollers Alignment in parallelism in each side roller position Hardened stop roller Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50%- pivoting operation- Digital displays (2 pieces) for the side roller position- Adjustable contact pressure of the bottom roller with manometer- hardened rollers SAE 1050 CK 45- Conical bending device- Hydraulic folding store for removing closed pipes- Direct drive of the upper and lower ro ...

Category: sheet metal working / 3-Roller Round Bending Machines
date: 02.04.2024 add to watchlist
Machine: MG SRL G3030 Roller Round Bending Machines
item-No.: 161556067
New in: 2021
new

3-roll hydraulic 3000x30 mm pre-pinch planetary MG model G3030 year 2021 -Plate width 3000 mm -Capacity thickness 30 mm -Pre-pinch 25 mm -width on the rolls 3100 mm -upper roll size 400 mm -lower rolls size 380 mm -Hardened rolls surface. -All driven 3rolls gear box motorized each synchronized rotation -Conical plate bending attachment , rolls tilting & contrast roller. -Operator console with directional joysticks and digital readouts -Front drop-end open hydraulic -Emergency and safety installation -User manuals and instruction books. -Electric power 25 HP on the hydraulic unit. -V400/50

Category: sheet metal working / 3-Roller Round Bending Machines
date: 02.04.2024 add to watchlist
Machine: MG SRL MG 3100X140 / 200 MM Roller Round Bending Machines
item-No.: 160798201
New in: 2022
used

Bending capacity: Plate width: 3000 mm Plate thickness 140 mm Thickness max 200 mm depending on plate width and yield strength Technical data: 3100 mm Surface useful length on rolls 940 mm size of Top roll 840 mm size of Lower rolls 210 mm max thickness opening between the rolls 400/50 Vac voltage - rewirable 480/60 220 Hp Power electric installed Configuration installed with the machine Hardened surface of the 3 rolls. Conical plate bending hydraulic attachment with hardened contrast pad. All the 3 rolls driven with axial gearbox and motor each roll independent Calibration system for the re-rolling of welded shells rounding unwanted flat spots. Console electric on wheels with centralized commands joysticks and digital readout. Opening front side hydraulic drop-end to unload closed shells. Variable speed working s ...

Category: sheet metal working / 3-Roller Round Bending Machines
date: 23.04.2024 add to watchlist
Machine: NOSSTEC ( LUNA ) 8264-10/35
item-No.: 156875603
new

sheet width: 1020 mmplate thickness: 3,5 mmroll diameter: 90 mmtotal power requirement: 0,75 kWweight of the machine ca.: 310 kgElectric 380 Volt: Foot switch: Symmetry roll arrangement.This machine is in the following sizes obtainable:worhing length from 1020 until 2520 mm,max. plate thickness ( 400 N/mm² ) from 1 until 8 mm.Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / 3-Roller Round Bending Machines
date: 18.03.2024 add to watchlist
Machine: ROUNDO PAS 550 3-Roller Round Bending Machines
item-No.: 162417462
New in: 2009
used

Max. length of plate 3000 mm Max. plate thickness 40 mm Number of rolls 3 pcs Upper roll diameter 550 mm Lower roll diameter 450 mm Control Roundo WCN Main motor power 94 Kw Equipped with: Pre-bending, hydraulic Three roll drive Cone bending divice Electro-hydraulic operation of drop-end Top support Side supports Roller conveyor Service tools etc.

Category: sheet metal working / 3-Roller Round Bending Machines
date: 23.04.2024 add to watchlist
Machine: SAY-MAK SIRM 2050/130
item-No.: 160852767
New in: 2018
used

sheet width: 2050 mmplate thickness: 3,0 mm max.roll length: 2050 mmroll diam. toproll: 130 mmbending speed: 3,0 m/mintotal power requirement: 2,2 kWweight: 1530 kgrange L-W-H: 3220 x 1200 x 900 mm very good condition () current new price ~ 17.000 eurosFurnishing:- Electrically driven top and bottom rollers- swing-out top roller, with folding bearing- asymmetrical roller arrangement- manual delivery of the bottom roller, by hand wheel- self-braking main motor- Profile inlets in the rollers- Safety line- free-moving footswitchSpecial equipment included in the price:- hardened rollers- Motorized rear roller adjustment- digital position display for rear rollerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / 3-Roller Round Bending Machines
date: 23.04.2024 add to watchlist
Machine: SCHÄFER SRM
item-No.: 161416035
New in: 1966
used

sheet width: 2550 mmplate thickness: 6 mmweight of the machine ca.: 3,9 t: Rollensatz für Rohrwalze The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / 3-Roller Round Bending Machines
date: 29.02.2024 add to watchlist
Machine: SCHÄFER SRMVS 3-Roller Round Bending Machines
item-No.: 129639065
New in: 1978
used

Working width: 3000 mm sheet thickness: 15 mm sheet thickness in bending: 10 mm top rollers Ã?: 320 mm bottom rollers diameter: 310 mm speed: approx. 5.5 m / min. Connection: 380V kW weight: 17000 kg space requirement: 5450 x 2100 x 2450 mm

Category: sheet metal working / 3-Roller Round Bending Machines
date: 23.04.2024 add to watchlist
Machine: SCHÄFER SRMVS 2000/20/15/11
item-No.: 161155085
New in: 1980
used

sheet width: 2000 mmplate thickness: 20 mmpre-bending: 15/11 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mwith initial roundingTechnische Daten:/ technical detailsBiegelänge / bending lenght 2000 mmmax. Blechstärke / max. sheet thickness 20 mmAnbiegeleistung / initial rounding 15/11 mmWalzendurchmesser Unterwalzen / roll diameter below rolls 280 mmOberwalzendurchmesser / diameter of the upper roll 300 mmAntriebsleistung Hauptantrieb / drive capacity main drive 16,2 kWAntriebsleistung Anstellantrieb Oberwalze / drive capacity upper roll 4,8 kWAntriebsleistung Anstellsntrien Unterwalze / drive capacity below roll 3,7 kWGewicht ca. / weight ca. 14200 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are n ...

Category: sheet metal working / 3-Roller Round Bending Machines
date: 04.04.2024 add to watchlist
Machine: STROJARNE PIESOK XZM 2000/12 3-Roller Round Bending Machines
item-No.: 159296273
used

Machine in working condition

Category: sheet metal working / 3-Roller Round Bending Machines
date: 08.04.2024 add to watchlist
Machine: unknown  3-Roller Round Bending Machines
item-No.: 123852320
used

Working width: 1040 mm sheet thickness: 1.25 mm sheet thickness in bending: top rollers diameter: 56 mm bottom rollers diameter: 56 mm weight: 190 kg space requirement: 1450 x 460 x 1030 mm