规格 最大磨削直径: 100 mm 工作台纵向运动:55毫米 磨头垂直调节:160 mm 磨头摆动范围: 水平:360° 磨削主轴转速: 数量(级别): 2 从: 2800 rpm 高达 5100 rpm 连接 50 Hz 3x:380 伏 磨削主轴电机:0.50 hp 机器重量约: 400 kg 尺寸机: 长: 1000毫米 宽: 950毫米 高: 1550毫米
Description: STRAMA camshaft cleaning system The cleaning system is suitable for cleaning camshafts or parts with smaller physical dimensions. , Camshaft cleaning was last carried out on the system. The machine is currently out of service. A brief description of how the machine works: A handling robot with a 3-finger centric gripper takes the camshafts automatically. The robot feeds the camshaft to the cleaning, drying and vacuum drying stations one after the other. The cleaned and dried shaft is then automatically deposited by the robot in a removal station. , The cleaning system consists of the following components: Transfer with robot from workpiece carriers Cleaning stations: Cleaning, blowing off / drying and vacuum drying Removal station (depositing by robot) Handling robot with gripper (robot type: KUKA, KR30-3 Foundry) Soundproof enclosure Tank, filter and pum ...
磨削直径 - 最大: x mm 磨削长度: 120 mm 工件长度: 270 mm 工作台尺寸: 270x80 mm 机床重量 约: 0.2 t 空间要求 约: 0.8x0.7x1.4 m 偏头 夹 头冷却液装置 更多信息 www.marcels-maschinen.ch 本广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的机器管理。
中心距:0 mm 磨头 Z轴:0 mm 中心高度:0 mm CNC 品牌:0 CNC 型号:0 技术数据 砂轮直径:75 mm 磨头垂直调整:100 mm 工作台旋转:60 电压 50 Hz 3x:380 伏 磨主轴电机:0.3 HP 机器重量约:140 kg 整机尺寸:长度 : 600 mm 宽度:475 mm 高度:1500 mm 各种附件: 一套法兰 冷却液系统 灯 半径研磨装
Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Grinding-wheel diameter: 75 mm Drilling cap. of grind.wheel: 20 mm Longitudinal way of table: 55 mm Vertical adjustment of grinding head: 160 mm Slewing range of grinding head: horizontal: 360 ° Grinding spindle speeds: number (steps): 2 from: 2800 rpm up to: 5100 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 0.50 HP Machine´s weight about: 150 kg Overall dimensions machine: Length: 1000 mm Width: 950 mm Height: 1550 mm
Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Max. grinding diameter: 100 mm Longitudinal way of table: 55 mm Vertical adjustment of grinding head: 160 mm Slewing range of grinding head: horizontal: 360 ° Grinding spindle speeds: number (steps): 2 from: 2800 rpm up to: 5100 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 0.50 HP Machine´s weight about: 400 kg Overall dimensions machine: Length: 1000 mm Width: 950 mm Height: 1550 mm