挤出机 二手 出售

Key data: 30 mm, 28 , 110 U/min

二手灯丝线 单螺杆挤出机 30mm 28L/D 2米水浴 触发器 AB50 绕线机 W250 PMH GmbH 的机器

Key data: 50 mm, 30

二手挤出机状况良好 螺钉尺寸：直径 50 mm x 30V 凹槽进气和脱气区 型号 RH 241-1-50-30V 带直流驱动 30.2 kW 建成于 1993 无需控制柜即可立即使用 带控制柜 4-6周交货时�

JHD-65 PVC 电缆桥架挤出机建于 2010 年。该机器可以高效生产 PVC 电缆桥架，用于建筑物内电缆和电信电缆的布线和保� ��。大量可用的头使得制造各种尺寸的元件成为可能� � 提供的电缆桥架生产线是完整的，由以下设备组成： – 单螺杆挤出机 – 用于生产尺寸为 60×40 mm、90×40 mm、90×60 mm、110×60 mm、15×10 mm、20×15 mm、35×15 mm、35×18 mm、40×25 mm、40×40 mm 的电缆桥架的头部和校准器 – 校准表 –圆锯 – 履带牵引 – 卸载台 – 液压电源 JHD-65 电缆桥架挤出生产线各个部件的技术规格 单螺杆挤出机 - 制造商： Shanghai Jiahao Machinery Co.，Ltd. - PLC 控制 - 产能：60-80 kg/h - 螺杆直径：65 mm - 螺杆转速：8-85 rpm - 螺杆长径比：30：1 L/D - 加热区数量：5+5 - 固态继电器 （SSR） - � ...

Two gravimetric Colotronic batch dosing and mixing machines with a main extruder and a co-extruder are available. 1) Colortronic UB 675, year of manufacture: 2010, max. throughput: 700kg/h, mixing components: 6, dosing principle: vertical slide gate. 2) Colortronic UB 975, year of manufacture: 2010, max. throughput: 2500kg/h, components: 2-8. Dosing and mixing capacity (both together): approx. 230kg/h. Documentation available. On-site inspection is possible.

This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information.

CDM PREALPINA REGRANULATING LINE, for PE PP PS PP PC ABS, Capacity 500-600 kg/h, Materials PE PP PC PS ABS PA, McGuire feeding system with tower(on separate request), extruder with 130 mm. screw diam., Totally reconditioned in 2020, crammed feeding unit, extruder 130 mm.(screw+barrel+grooved feeding piece new in 2020), one degassing pump 5,5 kw RAS400, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet (new 2020), immediately available, installed power Kw: 435, used power in work: 280 kw, cooling: 13.400 Kcal/h, CAPACITY: 500-600 kg/h depending on materials and feeding rate

PRT EXTRUDER for PE PP PC PS ABS, Extruder with 85 mm screw, 30 L/D, 60 kw d.c.Siemens drive 2.200 rpm, Average throughput rate 200 kg/h, depending on materials and feeding rate, Total heaters power 38,6 kw, N.1 vacuum degassing pump, manual screenchanger 120 mm, water ring pelletizer, electric cabinet to be reconditioned - drawings available, New in 1999, AVAILABILITY: READY

CDM PREALPINA USED EXTRUSION LINE, for HDPE LDPE LLDPE PS PC ABS PP, nominal throughput rate 240-320 kg/h (depending on material and feeding rate), Total installed power 104 kw ca 380 V 50 H 3Ph (65% used in work), including:, scrap silo with extraction screw, crammed feeding unit, extruder with heaters and vents, fitted with a 85 mm Ø screw 35 L/D, vacuum degassing pump, semi-automatic non-stop hydraulic screen-changer complete with hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet, CE compliance, User’s manuals, Electrical drawings, This line is offered fully RECONDITIONED, AVAILABILITY: about 10 weeks from confirmation, CAPACITY: 240-320 kg/h, INSTALLED POWER: 104 kw

length: . mmwidth: . mmheight: . mm2 workbenches 1x with viceThe technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CINCINNATI NEXANS PIPE EXTRUSION LINE PEX-AL-PEX, Extruder mod.Prototn with 45 mm Ø screw for coating, Cincinnati co-extruder CE-30 for glueing, Cooling tank Cincinnati Sprayon 63T/5,8/3k, Vacuum tank Cincinnati Vacon 63T/5,8/3k, Haul-off Cincinnati Tracton 63/1C-6, Alluminum welder Leicht WIG-120, Alluminum unwinder AMT AH1,0/1700, Chiller HYFRA VWK30-1-S, Alluminum pipe welder AIXCON PWU 400, Stockpile to form hythe alluminum pipe, UNIWEMA 30 KMW welding unit, Generator for welder Huttinger BIG 40/100, Coating extrduer Cincinnati Proton 45-30G, Glue co-extruder Cincinnati CE-30, Cooling tank Sider Jack, Cooling tank Cincinnati Sprayon 63T/5,8/3k, Haul-off Cincinnati RAE 63/1 X1, Marking machine IMAJE 9040, X ray gauge x SCITEQ X-ACT TWINEYE 40, Automatic winder FB Balzanelli TR1350 L1/8/M, end product: AL pipes coated with PEX inside and outside

CINCINNATI-MILACRON TWIN SCREW EXTRUDER, for PVC profiles, extruder with 2 x 45 mm conical screws, average production 100 kg/h, 14 kw drive, for profiles with max width 250 mm., calibration desk with 2 pumps x 5 kw, caterpillar pull off unit, contact length 1500 mm, width250 mm., planetary saw, collection table, installed power Kw: 14, CAPACITY: 100 kg/h ca, screws: 45 mm. conical

PVC PROFILE EXTRUSION LINE EVC BRAND, single screw extruder with 60 mm 28 LD, constructed in 1998, for 180 mm max width, 44 kw drive, control panel, Calibrating desk 3,7 m.long with 1 x 9 kw.pump, Caterpillar pull off unit, 180 mm wide, saw, 6,0 mt.long discharging table.

CDM PREALPINA REGRANULATING LINE, for PE PP PS PP PC ABS, Capacity 500-600 kg/h, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2013, crammed feeding unit, extruder 130 mm., one degassing pump 5,5 kw, semi-automatic screen changer 230 mm diam.screens, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine totally reconditioned, installed power Kw: 435, used power in work: 280 kw, cooling: 13.400 Kcal/h, CAPACITY: 500-600 kg/h depending on materials and feeding rate

INDUSTRIE GENERALI CGB 70-21., 2 x 70 mm parallel, coumìnter-rotating screws for PVC 21 L/D, Installed power 77,5 kW, GREINER CALIBRATING DESK CAL mod 2P/3,5 with 10 kW installed power, GREINER pull off unit CAT MOD 10/10 with 20 kw installed power, GREINER cutting saw, Stacking table, Control panel 400 V 50 Hz, Machine offered RECONDITIONED, installed power Kw: 110

Used Reifenhäuser Coextrusion Line for A-B-A Film with Inline ILLIG RDM70K, ILLIG BGR 53 & Inline ILLIG RS75 Grinder, details are as follows:-, Motan 4 Component Gravimetric Dosing Mixing Unit, Main Extruder Reifenhäuser RH 801-1-90-30 age 1990, Dia 90 mm, L/D 30, Co-extruder Reifenhäuser RH 241-1-50-30, age 1997, Dia. 50 mm, L/D 30, Siemens SIMOREG Extruder Drives, Screen Changer: Coextruder is manuel, Main Extruder is automatic SML Screen Band Filter, controlled with both Pressure and time, Melt Pump: MAAG 56/ 56, A-B-A Adapter, 860 mm Flexlip Die, 3 x Roll Polished Chrome Reifenhäuser Cooling/ Polishing Stack, updated with individual LENZE Servo Motors for each Roll, Dia Ø 250 mm, Width 795 mm, 2 x Roll Take-Off, Max. output with PP: Main Extruder 250 Kg/ hr, Coextruder 50 Kg/ hr, Inline ILLIG RDM 70K, age 1991, With SIEMENS S5 PLC and ENCODER on the Main Shaft, Indramat Servo Mo ...

CDM REGRANULATING LINE, Capacity 500-600 kg/h, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2013, crammed feeding unit, extruder 130 mm., one degassing pump 5,5 kw, fully-automatic screen changer FIMIC RAS 400, water ring pelletizing unit, drying centrifuge, heat eschanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power Kw: 435, used power in work: 280 kw, cooling: 13.400 Kcal/h, CAPACITY: 500-600 kg/h depending on materials and feeding rate

TECNOVA EXTRUSION LINE, for PE PP PC PS ABS, BUFFER SILO, screw conveyor, CRAMMED FEEDING UNIT, extruder with 130 mm. screw, 37 L/D, n.1 degassing pump, 200 Kw.a.c.drive, semi-automatic hydraulic screen changer with 220 mm Ø screens, hydraulic power station, water ring pelletizer, drying centrifuge, vibro-classifier, constructed in 2019, the line is offered AS IS or RECONDITIONED, -----------------------------------------------------------, This line can be integrated with, ENGINE PLAST GRANULATOR (in photos), type BA 1.000.550.3, 75 kw drive, 12 mm screen (or bespoke), blower to scrap silo of extrusion line, installed power Kw: 200

GAMMA MECCANICA TRIMCO 50, specific for regranulating clean production scraps with compactor, suggested max water content : 4% for best results, Throughput rate : max.80 kg/h depending on feeding rate and material, conveyor belt with metal detector, reel feeding possible through pulling unit on top of the 500 mm Ø compactor, extruder with 50 mm screw, no degassing point, 75 mm. Ø screenchanger, stainless steel NEW water ring pelletizer type TDA2 with spinner, cooling system, filtering system,, constructed in 2018, prepared for Industry 4.0, with remote connection to check on performances and diagnosis, PLC to manage all safety devices, immediately available as is in next-to-new conditions

CDM PREALPINA EXTRUDER 130 mm., For PE PP ABS PS PC PS, nominal throughput rate 500-600 kg/h depending on material and feeding rate, 280 kw. d.c. drive and starter (new 2019), Electric cabinet, CE compliance, users manual, electrical drawings, crammed feeding unit, Barrel with screw diam.130 mm.35 L/D, N.1 vacuum degassing pump, Constructed 1996, good working conditions

TECNOVA EXTRUSION LINE 130 mm. (5.11)5-600 kg/h (1.100-1,322 lbs/h), PE PP PC PS ABS PET PA, Including:, loading hopper for regrinds, Extruder with 130 mm (5.11) screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw a.c. drive, Total installed power 425 kw, used in work 250 kw ca., Semi-automatic non stop screen-changer with screens diam.250 mm., Water ring pelletizer, Drying centrifuge, constructed in 2012, Excellent conditions - ready to go, possible fitting with FULLY AUTOMATIC SCREENCHANGER, price options: as is, checked, lightly reconditioned, totally reconditioned

GAMMA MECCANICA TRIMCO 50, Specific for regranulation of clean production scraps with max.moisture 4%, Throughput rate : max.100-110 kg/h (increased power 55 kw - 36 kw used in work), conveyor belt with metal detector, 500 mm Ø compactor, extruder with 50 mm screw, no degassing point, manual screenchanger, water ring pelletizer, constructed in 2009, excellent conditions, immediately available

GAMMA MECCANICA GM 90-35D COMPAC HP Year 2016, Material: hard and soft plastics PP, PE, PP/PE, PS, ABS, Output up to 400 kg/h depending on the type of material and feeding rate, Loading belt with metal detector, Feeding system complete with ecotronic system to connect with master system, agglomerator, n.1 dosing unit, Extruder 90 mm. 35 L/D, with double degassing, Oleodynamic screenchanger 144 mm. diam screen, Hot granulation on die, water circle system, Working only with post-industrial waste, Extruder motor 90 Kw - compactor motor 55 kw, Installed power 200 kw, 3x400V + N + PE, In 2021 the line has been completely dismantled and all bearings, fittings, seal, air and oil hose and electrical cables have been replaced with brand new ones, Constructed in 2016, Connected and testable

3 LAYERS FILM EXTRUDER GHIOLDI (mounted and connected - immediately available), connected, in very good conditions, can be seen in work on appointment or on a video call. The line includes: N. 2 extruders diam. mm.55, 78 kW 30 L/D N. 1 extruder diam.75 mm. 142 kW, 30 L/D n. 3 lever type screen changers Melt control system 3-layers type 400 still die Ø mm.300 gap. mm.1,4 IBC cooling system AM500/2 dual flow cooling ring 2 temperature exchange batteries electrical cabinets with Mitzubishi inverters Oscillating pull-off system, Gusseting units FIFE web guider Bubble driver with vertical adjustment and sensor for automatic bubble inflating (maximum Ø 1.175 mm.) for 3.580 mm. ca web circumference) calibration cage can be replaced with a wider one. Back to back winding station 1.680 with 4 expandible mandrels Automatic film cutting Automatic reel unloading system Bolted 12 m.tall tower with  ...

for LDPE HDPE PP ABS PC PS, Nominal throughput rate 350-450 kg/h depending on feeding reate and material including scrap silo fedding auger crammed feeder extruder with 105 mm screw 40 LD double degassing 110 kw a.c.drive non stop hydraulic screenchanger water ring pelletizer drying centrifuge electrical cabinet user’s manuals and drawings constructed in 2000 offered RECONDITIONED, Available with a fully automatic screenchanger, blender, etc.

NGR C-GRAN 105 V V HD, Compact extrusion system, including:, loading conveyor belt, Mesutronic metal detector, agglomerator 1.000 mm Ø, n.2 feeding units for additives, extruder with 105 mm screw Ø 21 L/D, n.2 degassing pumps, semi-automatic Nordson screenchanger 180 RS, water ring pelletizer, drying centrifuge, electric cabinet and control panel, Machine constructed in 2017, offered reconditioned

库存号 ： 6496 型号： BCE 1-45-25D 生产商： Battenfeld 创建时间：2007 年 参数： 接通时间： 47000 h 工作台尺寸：2500 x 400 毫米 螺丝长度： 25 mm 螺丝直径： 45 mm 材质：PVC 牵引速度：3.5-50 m/min 头部直径： 45 mm 机器尺寸：2580 x 900 x 1100 毫米 重量： 1030 kg 线路组件： CT2500/V1 型校准台 挤出机 1-45-25D 型 牵引类型 B100E

Key data: 120 mm, 22 , 48 U/min

制造年份：1988 / 2025 年修订版 机器编号：250915/88 螺杆：∅ 120 mm x 22 D，带真空区 螺钉再生、抛光和硬化 NEW 螺杆温度控制：通过新型 Rotoflux 旋转接头钻出用于温度控制的螺钉 螺杆转速：最大 48 rpm 功率：约 255 - 450 kg/h（制造商信息来自宣传册;取决于材料和型材;DEGUMA 不对实际的、特定于产品的排放量承担任何保证） 挤出高度： 1300 mm 气缸：进料、混合和出料区的衬套状况良好（根据 DEGUMA 的测量报告为 120.2），只有轻微的痕迹; 进料口 170 x 140 毫米，带进料斗; 带真空和真空泵的混合区; 进料辊大修并重新存放 气缸 + 螺杆 + 头部上的 7 个温度控制区 头部：铰链法兰上的直头，通过螺钉封闭; 配备新的 GNEUSS 压力和温度传感器 温度控制：不带温度控制系统 –  ...

Key data: 45 mm, 980 , 45 U/min

双螺杆挤出机，锥形 制造商： Cincinnati Milacron 类型：钛合金 45R-APC 制造年份： 1997 小时： 55,362 小时 螺钉几何形状：锥形，用于 PVC 硬型材 螺杆直径： 45 – 88 mm 螺杆速度：最大约 45 1/min。 电机功率： 20.1 kW， 驱动电机：ABB 直流电机 气缸加热/冷却区：3/2（带风扇的空气冷却） 适配器加热区：1 工具加热区：5 控制：EXc+（微处理器控制） 输出能力：约 100 - 120 kg/h，用于 PVC 硬质型材 尺寸：2500 x 1300 x 180 毫米（不含料斗）（长 x 宽 x 高） 重量： 2100 kg 注意：挤出机处于工作状态。 挤出机无需加料，无料斗 并且没有真空泵�

挤出 �

270010001500 GAMAK 电机 30 KW